On Tuesday, June 19, 2012 02:38:19 PM Marc Langlois wrote: > Hi, > In my case, i have a bug for phone calls. > The microphone volume is much lower downlink. > > Release hardware: GTA04A4 > Release software: Qtmoko v45 without other pakage. > > In the menu settings-> call options -> call volume -> Microphone volume is > null and i can not to change it. > In neocontrol -> call volume settings -> microphone, I can change the value > but the volume does not change.
You can change volume in NeoControl, but you have to do it during call. That means: make a call, press AUX to switch to application list and run NeoControl and then play with the volume controls. Once you are happy you can use the save button. You can do the same using alsamixer e.g. from ssh during call, but in this case you have to maually store the state - e.g. with: alsactl -f /opt/qtmoko/etc/alsa/gsmearpiece.state store I am afraid that with louder mic the other side will start getting echo. But i havent checked it yet. I hope the situation will be much better with HW routed sound. There are good chances that the echo cancelling will work better and it will allow louder playback/mic volumes. Then should also disappear the problems that some other application has soundcard open and the software routing program cant open the card. GTA04A4 is thanks to Christ van Willegen on the way so i hope i will start playing with it soon. Regards Radek _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community