On Mon, 2 Jul 2012 21:57:28 +0200 Marc Langlois <langlois.m...@gmail.com> wrote:
> Hi, > > After execution of Neil Brown's howto for GPRS on the GTA04, I would > conclude as: > +> For the connection to /dev/ttyHS3, I use minicom with the default > settings but the connection does not work consistently. > +> AT+CFUN = 3D1 (set phone functions on), and AT_OWANCALL=3D1,1,1 > returns me "ERROR". > > Here is my log: > AT+COPS > OK > AT+COPS? > + COPS: 0,0, "004f00720061006e0067006500200046", 0 > > OK > AT_OWANCALL = 3D1,1,1 Try dropping the spaces and the '3D' (which a mime-encoding artefact - '=' is sometimes encoded in email messages as '=3D'). So: AT_OWANCALL=1,1,1 NeilBrown > ERROR > AT_OWANDATA? > OK > > What are the tips for the connection débuger? > Can you used the modem mode multiplexing (neocontrol) with a GTA04A4? > The UMTS signal reception is good in my house. > > Best regards, > > Marc > > >>Neil Jerram <neil at ossau.homelinux.net> writes: > >> Marc Langlois <langlois.marc at gmail.com> writes: > >> > >>> Neil, > >>> > >>> My phone is GTA04A4. > >> > >> Ah, thanks. Has GPRS actually been integrated yet in QtMoko on the > >> GTA04? I'm not sure that it has. > > > >For ease of reference, here's Neil Brown's howto for GPRS on the GTA04 > >(and which it's well worth creating another copy of): > > > >> 0/ connect to /dev/ttyHS3 (others might work) > >> 1/ make sure you are registered with network. > >> e.g. > >> AT+CFUN=3D1 > >> AT+COPS > >> AT+COPS? > >> > >> 2/ establish data connection > >> AT_OWANCALL=3D1,1,1 > >> > >> 3/ collect status > >> > >> AT_OWANDATA? > >> My response was > >> _OWANDATA: 1, 49.179.102.244, 0.0.0.0, 211.29.132.12, 61.88.88.88, > >> 0.0.0= > >> .0, 0.0.0.0,144000 > >> ^IP address ^ ^DNS-1------^ ^DNS-2----^ > >> > >> 4/ configure network > >> > >> ifconfig hso0 49.179.102.244 up > >> route add default dev hso0 > >> > >> echo nameserver 211.29.132.12 > /etc/resolv.conf > >> echo nameserver 61.88.88.88 >> /etc/resolv.conf > >> > >> > >> > >> > >> And you should be set to go. If you want tethering via USB then add: > >> on GTA04: > >> echo 1 > /proc/sys/net/ipv4/ip_forward=20 > >> iptables -t nat -A POSTROUTING -s 192.168.0.200 -j MASQUERADE > >> > >> (here 192.168.0.200 is the IP of my notebook on the USB interface.) > >> > >> on notebook/desktop/whatever > >> > >> route add default gw 192.168.0.202 > >> echo nameserver 211.29.132.12 > /etc/resolv.conf > >> echo nameserver 61.88.88.88 >> /etc/resolv.conf > >> > >> (192.168.0.202 is IP of GTA04 of USB link). > >> > >> To terminate data call > >> > >> AT_OWANDATA=3D1,0,1 > >> > >> > >> You don't need pppd at all. > > > >But there are no occurrences of "OWAN" in the qtmoko codebase - so I'm > >pretty sure it hasn't been integrated yet. > > > > Neil > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community
signature.asc
Description: PGP signature
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community