https://qa.mandrakesoft.com/show_bug.cgi?id=115
------- Additional Comments From [EMAIL PROTECTED] 2003-02-15 13:57 -------
Update on KT400 motherboard. The new kernels are detecting the BIOS in the
Soyo Dragon Ultra (KT400) and setting the boot parameters noapic and acpi=off
when setting up LILO. Hpwever, the installation kernel is not detecting this and no
network is available when doing a network install with network.img. Booting the
kenel on the network.img with noapic and acpi=off solves this problem.
This at least should be addressed in the README if the kernel can not be made
aware of these chisets.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: RESOLVED
creation_date:
description:
I did an expert install of Mandrake-Linux 9.0 beta3 after downloading the
iso's, verifying the md5sums, and burning them on 700MB CD-RW's.
When the system tries to bring up eth0 on bootup, it complains that it can't
find the information for it and asks me to check that the link, cable, etc. are
OK. I have a computer running OpenBSD as a firewall between my ISP and my
internal network. My internal network is 192.168.0.X. OpenBSD is running a
DHCP server and has worked properly in the past with other Linux distros (LM
9.0beta2 as of yesterday). If I then manually configure the NIC to a static
IP, manually fill in the DNS nameservers of my IP provider, add the default
route to my firewall which is the gateway, networking works to the extent that
I am able to run Konqueror and browse the internet. I haven't tried anything
else (e.g. samba). As I say, four days before, I had installed LM beta2 and
this functionality worked fine.
This is my system:
Motherboard: FIC VA-503+
Processor: K6-2 500MHz
RAM: 256MB PC133 RAM @ 100MHz FSB
HardDrive: IBM-DJNA-371350 13.7GB 7200RPM
Video Card: AOpen PG975 AGP 4MB (Trident PG975 AGP)
Sound: Pine 3D Wavetable Sound (Uses Crystal 4235 ISA Sound)
TV Card: Zoltrix TVMAX
CD-RW#1: Mitsumi 48X9TE CD-RW 24x10x40
CD-RW#2: HP CD Writer Plus 4x4x24
USB Device: INTEL Pro Share Web Camera
Network Card: 3COM 3C905B
Monitor: Samsung SyncMaster 700IFT
Printer: HP600C
Mouse: PS2 Wheel type clone
Other Boards: Generic Brand ISA I/O 2-8250 Serial,
1 Parallel Used, HDD and floppy
disabled.
4 Partitions on the hard drive: hda1 - 6.2 GB Windows 98,
hda2 - 45.6 MB linux ext3 /boot,
hda3 - 5.8 GB linux ext3 /,
hda4 - 512 MB linux swap.
