Package: fglrx-legacy-driver Version: 8.97.100.3-1 Severity: normal Dear Maintainer,
after installing fglrx-legacy-driver on debian wheezy for my radeon mobility hd3471 hybrid x2 and configuring it with aticonfig --initial there is a watermark saying "AMD Testing use only" which is present everytime on the bottom right corner of the screen (including in the gdm3 logscreen). Either way it works perfectly well. -- Package-specific info: Full fglrx package list: ii fglrx-legacy-a 8.97.100.3-1 legacy events daemon for the non-free AMD Ra ii fglrx-legacy-c 8.97.100.3-1 control panel for the non-free ATI/AMD Radeo ii fglrx-legacy-d 8.97.100.3-1 non-free ATI/AMD RadeonHD display driver (le ii fglrx-legacy-m 8.97.100.3-1 dkms module source for the non-free ATI/AMD ii libfglrx-legac 8.97.100.3-1 non-free ATI/AMD RadeonHD display driver (ru ii libfglrx-legac 8.97.100.3-1 AMD XvBA (X-Video Bitstream Acceleration) ru ii libgl1-fglrx-l 8.97.100.3-1 proprietary libGL for the non-free ATI/AMD R VGA-compatible devices on PCI bus: 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620 [Mobility Radeon HD 3400 Series] DRM and fglrx Informations from dmesg: [ 0.000000] No AGP bridge found [ 0.000000] No AGP bridge found [ 0.225070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.692922] Linux agpgart interface v0.103 [ 7.686447] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 7.998324] [fglrx] Maximum main memory to use for locked dma buffers: 2561 MBytes. [ 7.998442] [fglrx] vendor: 1002 device: 9612 count: 1 [ 7.998784] [fglrx] vendor: 1002 device: 95c4 count: 2 [ 7.999177] [fglrx] ioport: bar 1, base 0x9000, size: 0x100 [ 7.999592] [fglrx] ioport: bar 4, base 0xa000, size: 0x100 [ 7.999901] [fglrx] Kernel PAT support is enabled [ 7.999949] [fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 2 minors [ 20.845895] fglrx_pci 0000:02:00.0: irq 46 for MSI/MSI-X [ 20.846687] [fglrx] Firegl kernel thread PID: 1880 [ 20.846971] [fglrx] Firegl kernel thread PID: 1881 [ 20.847069] [fglrx] Firegl kernel thread PID: 1882 [ 20.847405] [fglrx] IRQ 46 Enabled [ 21.191811] [fglrx] GART Table is not in FRAME_BUFFER range [ 23.259806] [fglrx] Gart USWC size:844 M. [ 23.259812] [fglrx] Gart cacheable size:333 M. [ 23.259818] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 23.259822] [fglrx] Reserved FB block: Unshared offset:fd55000, size:2a6000 [ 23.259825] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 27.239581] [fglrx:firegl_irq_enable] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1) Xorg X server configuration file status: -rw-r--r-- 1 root root 684 Aug 13 00:19 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 44629 Aug 13 10:20 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: [ 19.372] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 19.372] X Protocol Version 11, Revision 0 [ 19.372] Build Operating System: Linux 3.2.0-3-amd64 x86_64 Debian [ 19.372] Current Operating System: Linux Gallarus 3.2.0-3-amd64 #1 SMP Thu Jun 28 09:07:26 UTC 2012 x86_64 [ 19.372] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=a24ecc6f-f837-45d6-a981-809073ef332f ro quiet [ 19.372] Build Date: 18 July 2012 08:00:38AM [ 19.372] xorg-server 2:1.12.3-1 (Julien Cristau <jcris...@debian.org>) [ 19.373] Current version of pixman: 0.26.0 [ 19.373] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.373] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 19.373] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 13 10:19:33 2012 [ 19.400] (==) Using config file: "/etc/X11/xorg.conf" [ 19.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 19.433] (==) ServerLayout "aticonfig Layout" [ 19.433] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 19.434] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 19.435] (**) | |-->Device "aticonfig-Device[0]-0" [ 19.435] (==) Automatically adding devices [ 19.435] (==) Automatically enabling devices [ 19.451] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 19.451] Entry deleted from font path. [ 19.486] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 19.486] Entry deleted from font path. [ 19.486] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 19.486] (==) ModulePath set to "/usr/lib/xorg/modules" [ 19.487] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.487] (II) Loader magic: 0x7f9bcd51aae0 [ 19.487] (II) Module ABI versions: [ 19.487] X.Org ANSI C Emulation: 0.4 [ 19.487] X.Org Video Driver: 12.0 [ 19.487] X.Org XInput driver : 16.0 [ 19.487] X.Org Server Extension : 6.0 [ 19.491] (--) PCI: (0:1:5:0) 1002:9612:1025:0166 rev 0, Mem @ 0xd0000000/268435456, 0xafdf0000/65536, 0xafe00000/1048576, I/O @ 0x00009000/256 [ 19.491] (--) PCI:*(0:2:0:0) 1002:95c4:1025:0166 rev 0, Mem @ 0xb0000000/268435456, 0xafbf0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 [ 19.492] (II) Open ACPI successful (/var/run/acpid.socket) [ 19.492] (II) "extmod" will be loaded by default. [ 19.492] (II) "dbe" will be loaded by default. [ 19.492] (II) "glx" will be loaded by default. [ 19.492] (II) "record" will be loaded by default. [ 19.492] (II) "dri" will be loaded by default. [ 19.493] (II) "dri2" will be loaded by default. [ 19.493] (II) LoadModule: "extmod" [ 19.509] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 19.527] (II) Module extmod: vendor="X.Org Foundation" [ 19.527] compiled for 1.12.3, module version = 1.0.0 [ 19.527] Module class: X.Org Server Extension [ 19.527] ABI class: X.Org Server Extension, version 6.0 [ 19.527] (II) Loading extension SELinux [ 19.527] (II) Loading extension MIT-SCREEN-SAVER [ 19.527] (II) Loading extension XFree86-VidModeExtension [ 19.527] (II) Loading extension XFree86-DGA [ 19.527] (II) Loading extension DPMS [ 19.527] (II) Loading extension XVideo [ 19.527] (II) Loading extension XVideo-MotionCompensation [ 19.527] (II) Loading extension X-Resource [ 19.527] (II) LoadModule: "dbe" [ 19.528] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 19.538] (II) Module dbe: vendor="X.Org Foundation" [ 19.538] compiled for 1.12.3, module version = 1.0.0 [ 19.538] Module class: X.Org Server Extension [ 19.538] ABI class: X.Org Server Extension, version 6.0 [ 19.538] (II) Loading extension DOUBLE-BUFFER [ 19.538] (II) LoadModule: "glx" [ 19.539] (II) Loading /usr/lib/xorg/modules/linux/libglx.so [ 19.571] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 19.571] compiled for 6.9.0, module version = 1.0.0 [ 19.572] (II) Loading extension GLX [ 19.573] (II) LoadModule: "record" [ 19.573] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 19.619] (II) Module record: vendor="X.Org Foundation" [ 19.619] compiled for 1.12.3, module version = 1.13.0 [ 19.619] Module class: X.Org Server Extension [ 19.620] ABI class: X.Org Server Extension, version 6.0 [ 19.620] (II) Loading extension RECORD [ 19.620] (II) LoadModule: "dri" [ 19.620] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 19.649] (II) Module dri: vendor="X.Org Foundation" [ 19.649] compiled for 1.12.3, module version = 1.0.0 [ 19.649] ABI class: X.Org Server Extension, version 6.0 [ 19.650] (II) Loading extension XFree86-DRI [ 19.650] (II) LoadModule: "dri2" [ 19.650] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 19.651] (II) Module dri2: vendor="X.Org Foundation" [ 19.651] compiled for 1.12.3, module version = 1.2.0 [ 19.651] ABI class: X.Org Server Extension, version 6.0 [ 19.651] (II) Loading extension DRI2 [ 19.651] (II) LoadModule: "fglrx" [ 19.653] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so [ 20.075] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 20.075] compiled for 1.4.99.906, module version = 8.97.2 [ 20.075] Module class: X.Org Video Driver [ 20.078] (II) Loading sub module "fglrxdrm" [ 20.078] (II) LoadModule: "fglrxdrm" [ 20.078] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 20.117] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 20.117] compiled for 1.4.99.906, module version = 8.97.2 [ 20.117] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2 [ 20.117] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3 [ 20.118] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30 [ 20.118] (++) using VT number 7 [ 20.125] (WW) Falling back to old probe method for fglrx [ 20.283] (II) Loading PCS database from /etc/ati/amdpcsdb [ 20.291] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:0) found [ 20.291] (--) Chipset Supported AMD Graphics Processor (0x95C4) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found [ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found [ 20.342] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found [ 20.342] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found [ 20.342] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found [ 20.342] (**) ChipID override: 0x9612 [ 20.342] (**) Chipset Supported AMD Graphics Processor (0x9612) found [ 20.351] ukiDynamicMajor: found major device number 250 [ 20.351] ukiDynamicMajor: found major device number 250 [ 20.351] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 20.351] ukiOpenDevice: node name is /dev/ati/card0 [ 20.351] ukiOpenDevice: open result is 8, (OK) [ 20.351] ukiOpenByBusid: ukiOpenMinor returns 8 [ 20.351] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 20.351] ukiOpenDevice: node name is /dev/ati/card1 [ 20.351] ukiOpenDevice: open result is 8, (OK) [ 20.351] ukiOpenByBusid: ukiOpenMinor returns 8 [ 20.351] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 20.354] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 20.354] (II) AMD Video driver is unsigned [ 20.354] (II) fglrx(0): pEnt->device->identifier=0x7f9bcd6ad7b0 [ 20.354] (II) pEnt->device->identifier=(nil) [ 20.355] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin [ 20.356] (II) Loading sub module "vgahw" [ 20.356] (II) LoadModule: "vgahw" [ 20.357] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 20.380] (II) Module vgahw: vendor="X.Org Foundation" [ 20.380] compiled for 1.12.3, module version = 0.1.0 [ 20.380] ABI class: X.Org Video Driver, version 12.0 [ 20.380] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 20.381] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 20.381] (==) fglrx(0): Default visual is TrueColor [ 20.381] (**) fglrx(0): Option "DPMS" "true" [ 20.381] (==) fglrx(0): RGB weight 888 [ 20.381] (II) fglrx(0): Using 8 bits per RGB [ 20.381] (==) fglrx(0): Buffer Tiling is ON [ 20.382] (II) Loading sub module "fglrxdrm" [ 20.382] (II) LoadModule: "fglrxdrm" [ 20.382] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 20.382] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 20.382] compiled for 1.4.99.906, module version = 8.97.2 [ 20.397] ukiDynamicMajor: found major device number 250 [ 20.398] ukiDynamicMajor: found major device number 250 [ 20.398] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 20.398] ukiOpenDevice: node name is /dev/ati/card0 [ 20.398] ukiOpenDevice: open result is 13, (OK) [ 20.398] ukiOpenByBusid: ukiOpenMinor returns 13 [ 20.398] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 20.398] ukiOpenDevice: node name is /dev/ati/card1 [ 20.398] ukiOpenDevice: open result is 13, (OK) [ 20.398] ukiOpenByBusid: ukiOpenMinor returns 13 [ 20.398] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 20.399] ukiDynamicMajor: found major device number 250 [ 20.399] ukiDynamicMajor: found major device number 250 [ 20.399] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 20.399] ukiOpenDevice: node name is /dev/ati/card0 [ 20.399] ukiOpenDevice: open result is 14, (OK) [ 20.399] ukiOpenByBusid: ukiOpenMinor returns 14 [ 20.399] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 20.400] (**) fglrx(0): NoAccel = NO [ 20.400] (**) fglrx(0): ATI 2D Acceleration Architecture enabled [ 20.400] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4) [ 20.400] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0166) [ 20.400] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 20.401] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000 [ 20.401] (--) fglrx(0): MMIO registers at 0xafbf0000 [ 20.401] (--) fglrx(0): I/O port at 0x0000a000 [ 20.401] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 20.425] (II) fglrx(0): AC Adapter is used [ 20.493] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 20.626] (II) Loading sub module "vbe" [ 20.626] (II) LoadModule: "vbe" [ 20.626] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 20.691] (II) Module vbe: vendor="X.Org Foundation" [ 20.692] compiled for 1.12.3, module version = 1.1.0 [ 20.692] ABI class: X.Org Video Driver, version 12.0 [ 20.693] (II) fglrx(0): VESA BIOS detected [ 20.693] (II) fglrx(0): VESA VBE Version 3.0 [ 20.693] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 20.694] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS [ 20.694] (II) fglrx(0): VESA VBE OEM Software Rev: 10.88 [ 20.694] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. [ 20.694] (II) fglrx(0): VESA VBE OEM Product: M82 [ 20.694] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 20.748] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 20.748] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2 [ 20.748] (II) fglrx(0): PCIE card detected [ 20.748] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 20.748] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 20.748] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0166) [ 20.748] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 20.748] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 [ 20.748] (--) fglrx(0): MMIO registers at 0xafdf0000 [ 20.748] (--) fglrx(0): I/O port at 0x00009000 [ 20.748] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 20.749] (II) fglrx(0): AC Adapter is used [ 20.752] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled [ 20.767] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 20.767] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2 [ 20.767] (II) fglrx(0): PCIE card detected [ 20.767] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 20.767] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 20.769] (II) fglrx(0): Using adapter: 2:0.0. [ 20.797] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000) [ 20.847] (II) fglrx(0): Interrupt handler installed at IRQ 46. [ 20.847] (II) fglrx(0): Using adapter: 1:5.0. [ 20.869] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000) [ 21.192] (II) fglrx(0): RandR 1.2 support is enabled! [ 21.192] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 21.192] (==) fglrx(0): Center Mode is disabled [ 21.192] (II) Loading sub module "fb" [ 21.192] (II) LoadModule: "fb" [ 21.192] (II) Loading /usr/lib/xorg/modules/libfb.so [ 21.281] (II) Module fb: vendor="X.Org Foundation" [ 21.281] compiled for 1.12.3, module version = 1.0.0 [ 21.281] ABI class: X.Org ANSI C Emulation, version 0.4 [ 21.281] (II) Loading sub module "ddc" [ 21.281] (II) LoadModule: "ddc" [ 21.281] (II) Module "ddc" already built-in [ 22.479] (II) fglrx(0): Finished Initialize PPLIB! [ 22.853] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0 [ 22.853] (II) fglrx(0): Output DFP1 has no monitor section [ 22.853] (II) fglrx(0): Output CRT1 has no monitor section [ 22.853] (II) Loading sub module "ddc" [ 22.853] (II) LoadModule: "ddc" [ 22.853] (II) Module "ddc" already built-in [ 22.853] (II) fglrx(0): Connected Display0: LVDS [ 22.854] (II) fglrx(0): Display0 EDID data --------------------------- [ 22.854] (II) fglrx(0): Manufacturer: SEC Model: 304c Serial#: 0 [ 22.854] (II) fglrx(0): Year: 2008 Week: 0 [ 22.854] (II) fglrx(0): EDID Version: 1.3 [ 22.854] (II) fglrx(0): Digital Display Input [ 22.854] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 20 [ 22.854] (II) fglrx(0): Gamma: 2.20 [ 22.854] (II) fglrx(0): No DPMS capabilities specified [ 22.854] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 22.855] (II) fglrx(0): First detailed timing is preferred mode [ 22.855] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 22.855] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 22.855] (II) fglrx(0): Manufacturer's mask: 0 [ 22.855] (II) fglrx(0): Supported detailed timing: [ 22.855] (II) fglrx(0): clock: 72.3 MHz Image Size: 353 x 198 mm [ 22.855] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 [ 22.855] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0 [ 22.855] (II) fglrx(0): Unknown vendor-specific block f [ 22.855] (II) fglrx(0): SAMSUNG [ 22.856] (II) fglrx(0): 160AT01-A02 [ 22.856] (II) fglrx(0): EDID (in hex): [ 22.856] (II) fglrx(0): 00ffffffffffff004ca34c3000000000 [ 22.856] (II) fglrx(0): 00120103802314780a87f594574f8c27 [ 22.856] (II) fglrx(0): 27505400000001010101010101010101 [ 22.856] (II) fglrx(0): 010101010101411c56a0500016303020 [ 22.856] (II) fglrx(0): 250061c6100000190000000f00000000 [ 22.856] (II) fglrx(0): 00000000001eb4027400000000fe0053 [ 22.856] (II) fglrx(0): 414d53554e470a2020202020000000fe [ 22.857] (II) fglrx(0): 00313630415430312d4130320a2000b8 [ 22.857] (II) fglrx(0): End of Display0 EDID data -------------------- [ 23.256] (II) fglrx(0): EDID for output LVDS [ 23.256] (II) fglrx(0): Manufacturer: SEC Model: 304c Serial#: 0 [ 23.256] (II) fglrx(0): Year: 2008 Week: 0 [ 23.256] (II) fglrx(0): EDID Version: 1.3 [ 23.256] (II) fglrx(0): Digital Display Input [ 23.256] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 20 [ 23.256] (II) fglrx(0): Gamma: 2.20 [ 23.256] (II) fglrx(0): No DPMS capabilities specified [ 23.256] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 23.256] (II) fglrx(0): First detailed timing is preferred mode [ 23.256] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 23.256] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 23.256] (II) fglrx(0): Manufacturer's mask: 0 [ 23.256] (II) fglrx(0): Supported detailed timing: [ 23.256] (II) fglrx(0): clock: 72.3 MHz Image Size: 353 x 198 mm [ 23.256] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 [ 23.256] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0 [ 23.256] (II) fglrx(0): Unknown vendor-specific block f [ 23.256] (II) fglrx(0): SAMSUNG [ 23.256] (II) fglrx(0): 160AT01-A02 [ 23.256] (II) fglrx(0): EDID (in hex): [ 23.256] (II) fglrx(0): 00ffffffffffff004ca34c3000000000 [ 23.256] (II) fglrx(0): 00120103802314780a87f594574f8c27 [ 23.256] (II) fglrx(0): 27505400000001010101010101010101 [ 23.256] (II) fglrx(0): 010101010101411c56a0500016303020 [ 23.256] (II) fglrx(0): 250061c6100000190000000f00000000 [ 23.256] (II) fglrx(0): 00000000001eb4027400000000fe0053 [ 23.257] (II) fglrx(0): 414d53554e470a2020202020000000fe [ 23.257] (II) fglrx(0): 00313630415430312d4130320a2000b8 [ 23.257] (II) fglrx(0): EDID vendor "SEC", prod id 12364 [ 23.257] (II) fglrx(0): Printing DDC gathered Modelines: [ 23.257] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 23.257] (II) fglrx(0): Printing probed modes for output LVDS [ 23.257] (II) fglrx(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "1280x768"x60.0 72.33 1280 1414 1446 1526 768 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "1280x720"x60.0 72.33 1280 1414 1446 1526 720 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "1024x768"x60.0 72.33 1024 1414 1446 1526 768 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "1024x600"x60.0 72.33 1024 1414 1446 1526 600 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "800x600"x60.0 72.33 800 1414 1446 1526 600 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "800x480"x60.0 72.33 800 1414 1446 1526 480 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "720x480"x60.0 72.33 720 1414 1446 1526 480 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): Modeline "640x480"x60.0 72.33 640 1414 1446 1526 480 770 775 790 +hsync +vsync (47.4 kHz) [ 23.257] (II) fglrx(0): EDID for output DFP1 [ 23.257] (II) fglrx(0): EDID for output CRT1 [ 23.257] (II) fglrx(0): Output LVDS connected [ 23.257] (II) fglrx(0): Output DFP1 disconnected [ 23.257] (II) fglrx(0): Output CRT1 disconnected [ 23.257] (II) fglrx(0): Using exact sizes for initial modes [ 23.257] (II) fglrx(0): Output LVDS using initial mode 1366x768 [ 23.257] (II) fglrx(0): Display dimensions: (350, 200) mm [ 23.257] (II) fglrx(0): DPI set to (99, 97) [ 23.257] (II) fglrx(0): Adapter ATI Mobility Radeon HD 3400 Series has 2 configurable heads and 1 displays connected. [ 23.257] (==) fglrx(0): PseudoColor visuals disabled [ 23.257] (II) Loading sub module "ramdac" [ 23.257] (II) LoadModule: "ramdac" [ 23.257] (II) Module "ramdac" already built-in [ 23.257] (==) fglrx(0): NoDRI = NO [ 23.257] (==) fglrx(0): Capabilities: 0x00000000 [ 23.257] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 23.257] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 23.257] (==) fglrx(0): UseFastTLS=0 [ 23.258] (==) fglrx(0): BlockSignalsOnLock=1 [ 23.258] (--) Depth 24 pixmap format is 32 bpp [ 23.258] (II) Loading extension ATIFGLRXDRI [ 23.258] (II) fglrx(0): doing swlDriScreenInit [ 23.258] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 23.258] ukiDynamicMajor: found major device number 250 [ 23.258] ukiDynamicMajor: found major device number 250 [ 23.259] ukiDynamicMajor: found major device number 250 [ 23.259] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 23.259] ukiOpenDevice: node name is /dev/ati/card0 [ 23.259] ukiOpenDevice: open result is 15, (OK) [ 23.259] ukiOpenByBusid: ukiOpenMinor returns 15 [ 23.259] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 23.259] ukiOpenDevice: node name is /dev/ati/card1 [ 23.259] ukiOpenDevice: open result is 15, (OK) [ 23.259] ukiOpenByBusid: ukiOpenMinor returns 15 [ 23.259] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 23.259] (II) fglrx(0): [uki] DRM interface version 1.0 [ 23.259] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0" [ 23.259] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 23.259] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9bcd126000 [ 23.259] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 23.259] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 23.259] (II) fglrx(0): swlDriScreenInit done [ 23.259] (II) fglrx(0): Kernel Module Version Information: [ 23.259] (II) fglrx(0): Name: fglrx [ 23.259] (II) fglrx(0): Version: 8.97.2 [ 23.259] (II) fglrx(0): Date: Jul 4 2012 [ 23.259] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 23.259] (II) fglrx(0): Kernel Module version matches driver. [ 23.259] (II) fglrx(0): Kernel Module Build Time Information: [ 23.259] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-3-amd64 [ 23.259] (II) fglrx(0): Build-Kernel MODVERSIONS: no [ 23.259] (II) fglrx(0): Build-Kernel __SMP__: no [ 23.259] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 23.259] (II) fglrx(0): [uki] register handle = 0x00004000 [ 23.379] (II) fglrx(0): DRI initialization successfull [ 23.433] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000 [ 23.448] (==) fglrx(0): Backing store disabled [ 23.448] (II) Loading extension FGLRXEXTENSION [ 23.449] (**) fglrx(0): DPMS enabled [ 23.450] (II) fglrx(0): Initialized in-driver Xinerama extension [ 23.450] (**) fglrx(0): Textured Video is enabled. [ 23.451] (II) LoadModule: "glesx" [ 23.452] (II) Loading /usr/lib/xorg/modules/glesx.so [ 23.831] (II) Module glesx: vendor="X.Org Foundation" [ 23.831] compiled for 1.4.99.906, module version = 1.0.0 [ 23.831] (II) Loading extension GLESX [ 23.831] (II) fglrx(0): GLESX enableFlags = 528 [ 23.844] (II) fglrx(0): GLESX is enabled [ 23.844] (II) LoadModule: "amdxmm" [ 23.845] (II) Loading /usr/lib/xorg/modules/amdxmm.so [ 23.860] (II) Module amdxmm: vendor="X.Org Foundation" [ 23.860] compiled for 1.4.99.906, module version = 2.0.0 [ 23.861] (II) Loading extension AMDXVOPL [ 23.861] (II) Loading extension AMDXVBA [ 23.873] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 23.880] (II) fglrx(0): Enable composite support successfully [ 23.880] (WW) fglrx(0): Option "VendorName" is not used [ 23.880] (WW) fglrx(0): Option "ModelName" is not used [ 23.880] (II) fglrx(0): X context handle = 0x1 [ 23.881] (II) fglrx(0): [DRI] installation complete [ 23.881] (==) fglrx(0): Silken mouse enabled [ 23.882] (==) fglrx(0): Using HW cursor of display infrastructure! [ 23.882] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 23.883] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel' [ 23.883] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' [ 24.565] (--) RandR disabled [ 24.565] (II) Initializing built-in extension Generic Event Extension [ 24.565] (II) Initializing built-in extension SHAPE [ 24.565] (II) Initializing built-in extension MIT-SHM [ 24.565] (II) Initializing built-in extension XInputExtension [ 24.565] (II) Initializing built-in extension XTEST [ 24.565] (II) Initializing built-in extension BIG-REQUESTS [ 24.565] (II) Initializing built-in extension SYNC [ 24.565] (II) Initializing built-in extension XKEYBOARD [ 24.565] (II) Initializing built-in extension XC-MISC [ 24.565] (II) Initializing built-in extension SECURITY [ 24.565] (II) Initializing built-in extension XINERAMA [ 24.565] (II) Initializing built-in extension XFIXES [ 24.565] (II) Initializing built-in extension RENDER [ 24.565] (II) Initializing built-in extension RANDR [ 24.565] (II) Initializing built-in extension COMPOSITE [ 24.565] (II) Initializing built-in extension DAMAGE [ 24.565] (II) SELinux: Disabled on system [ 24.569] ukiDynamicMajor: found major device number 250 [ 24.569] ukiDynamicMajor: found major device number 250 [ 24.569] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 24.569] ukiOpenDevice: node name is /dev/ati/card0 [ 24.569] ukiOpenDevice: open result is 16, (OK) [ 24.569] ukiOpenByBusid: ukiOpenMinor returns 16 [ 24.569] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 24.569] ukiOpenDevice: node name is /dev/ati/card1 [ 24.569] ukiOpenDevice: open result is 16, (OK) [ 24.569] ukiOpenByBusid: ukiOpenMinor returns 16 [ 24.569] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 26.308] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 26.519] (II) fglrx(0): Enable the clock gating! [ 26.519] (II) fglrx(0): Setting screen physical size to 361 x 203 [ 27.036] (II) config/udev: Adding input device Power Button (/dev/input/event6) [ 27.037] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 27.037] (II) LoadModule: "evdev" [ 27.037] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 27.047] (II) Module evdev: vendor="X.Org Foundation" [ 27.047] compiled for 1.12.1, module version = 2.7.0 [ 27.047] Module class: X.Org XInput Driver [ 27.047] ABI class: X.Org XInput driver, version 16.0 [ 27.048] (II) Using input driver 'evdev' for 'Power Button' [ 27.048] (**) Power Button: always reports core events [ 27.048] (**) evdev: Power Button: Device: "/dev/input/event6" [ 27.048] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 27.048] (--) evdev: Power Button: Found keys [ 27.048] (II) evdev: Power Button: Configuring as keyboard [ 27.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6" [ 27.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 27.049] (**) Option "xkb_rules" "evdev" [ 27.049] (**) Option "xkb_model" "pc105" [ 27.049] (**) Option "xkb_layout" "fr" [ 27.049] (**) Option "xkb_variant" "latin9" [ 27.160] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 27.160] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 27.160] (II) Using input driver 'evdev' for 'Video Bus' [ 27.160] (**) Video Bus: always reports core events [ 27.160] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 27.160] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 27.160] (--) evdev: Video Bus: Found keys [ 27.160] (II) evdev: Video Bus: Configuring as keyboard [ 27.160] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7" [ 27.160] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 27.160] (**) Option "xkb_rules" "evdev" [ 27.160] (**) Option "xkb_model" "pc105" [ 27.160] (**) Option "xkb_layout" "fr" [ 27.160] (**) Option "xkb_variant" "latin9" [ 27.161] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 27.161] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 27.161] (II) Using input driver 'evdev' for 'Power Button' [ 27.161] (**) Power Button: always reports core events [ 27.161] (**) evdev: Power Button: Device: "/dev/input/event3" [ 27.161] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 27.161] (--) evdev: Power Button: Found keys [ 27.161] (II) evdev: Power Button: Configuring as keyboard [ 27.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3" [ 27.161] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 27.161] (**) Option "xkb_rules" "evdev" [ 27.161] (**) Option "xkb_model" "pc105" [ 27.161] (**) Option "xkb_layout" "fr" [ 27.161] (**) Option "xkb_variant" "latin9" [ 27.162] (II) config/udev: Adding input device Lid Switch (/dev/input/event5) [ 27.162] (II) No input driver specified, ignoring this device. [ 27.162] (II) This device may have been added with another device file. [ 27.162] (II) config/udev: Adding input device Sleep Button (/dev/input/event4) [ 27.162] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 27.162] (II) Using input driver 'evdev' for 'Sleep Button' [ 27.162] (**) Sleep Button: always reports core events [ 27.162] (**) evdev: Sleep Button: Device: "/dev/input/event4" [ 27.162] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 27.162] (--) evdev: Sleep Button: Found keys [ 27.162] (II) evdev: Sleep Button: Configuring as keyboard [ 27.162] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4" [ 27.162] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 27.162] (**) Option "xkb_rules" "evdev" [ 27.163] (**) Option "xkb_model" "pc105" [ 27.163] (**) Option "xkb_layout" "fr" [ 27.163] (**) Option "xkb_variant" "latin9" [ 27.163] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12) [ 27.163] (II) No input driver specified, ignoring this device. [ 27.163] (II) This device may have been added with another device file. [ 27.164] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event1) [ 27.164] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall" [ 27.164] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025' [ 27.164] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events [ 27.164] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event1" [ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b [ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons [ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s) [ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes [ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes [ 27.164] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse [ 27.164] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support [ 27.164] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5 [ 27.164] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 27.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/input/input1/event1" [ 27.164] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 10) [ 27.164] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes. [ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1 [ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0 [ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000 [ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4 [ 27.165] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0) [ 27.165] (II) No input driver specified, ignoring this device. [ 27.165] (II) This device may have been added with another device file. [ 27.166] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2011 (/dev/input/event2) [ 27.166] (**) Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall" [ 27.166] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2011' [ 27.166] (**) Logitech Unifying Device. Wireless PID:2011: always reports core events [ 27.166] (**) evdev: Logitech Unifying Device. Wireless PID:2011: Device: "/dev/input/event2" [ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Vendor 0x46d Product 0xc52b [ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found 1 mouse buttons [ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found scroll wheel(s) [ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found relative axes [ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing relative x/y axes to exist. [ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found absolute axes [ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing absolute x/y axes to exist. [ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found keys [ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as mouse [ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as keyboard [ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Adding scrollwheel support [ 27.166] (**) evdev: Logitech Unifying Device. Wireless PID:2011: YAxisMapping: buttons 4 and 5 [ 27.166] (**) evdev: Logitech Unifying Device. Wireless PID:2011: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 27.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/input/input2/event2" [ 27.166] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2011" (type: KEYBOARD, id 11) [ 27.166] (**) Option "xkb_rules" "evdev" [ 27.166] (**) Option "xkb_model" "pc105" [ 27.166] (**) Option "xkb_layout" "fr" [ 27.166] (**) Option "xkb_variant" "latin9" [ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: initialized for relative axes. [ 27.167] (WW) evdev: Logitech Unifying Device. Wireless PID:2011: ignoring absolute axes. [ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) keeping acceleration scheme 1 [ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration profile 0 [ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration factor: 2.000 [ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration threshold: 4 [ 27.167] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event13) [ 27.167] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall" [ 27.167] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam' [ 27.167] (**) Acer Crystal Eye webcam: always reports core events [ 27.167] (**) evdev: Acer Crystal Eye webcam: Device: "/dev/input/event13" [ 27.167] (--) evdev: Acer Crystal Eye webcam: Vendor 0x64e Product 0xa103 [ 27.168] (--) evdev: Acer Crystal Eye webcam: Found keys [ 27.168] (II) evdev: Acer Crystal Eye webcam: Configuring as keyboard [ 27.168] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13/event13" [ 27.168] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD, id 12) [ 27.168] (**) Option "xkb_rules" "evdev" [ 27.168] (**) Option "xkb_model" "pc105" [ 27.168] (**) Option "xkb_layout" "fr" [ 27.168] (**) Option "xkb_variant" "latin9" [ 27.168] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 27.169] (II) No input driver specified, ignoring this device. [ 27.169] (II) This device may have been added with another device file. [ 27.169] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event10) [ 27.169] (II) No input driver specified, ignoring this device. [ 27.169] (II) This device may have been added with another device file. [ 27.169] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 27.169] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 27.169] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 27.169] (**) AT Translated Set 2 keyboard: always reports core events [ 27.169] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 27.169] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 27.169] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 27.169] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 27.170] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 27.170] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13) [ 27.170] (**) Option "xkb_rules" "evdev" [ 27.170] (**) Option "xkb_model" "pc105" [ 27.170] (**) Option "xkb_layout" "fr" [ 27.170] (**) Option "xkb_variant" "latin9" [ 27.170] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11) [ 27.170] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 27.170] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 27.171] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 27.171] (II) LoadModule: "synaptics" [ 27.171] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 27.197] (II) Module synaptics: vendor="X.Org Foundation" [ 27.197] compiled for 1.12.1.902, module version = 1.6.2 [ 27.197] Module class: X.Org XInput Driver [ 27.197] ABI class: X.Org XInput driver, version 16.0 [ 27.197] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 27.197] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 27.197] (**) Option "Device" "/dev/input/event11" [ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons [ 27.209] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 27.209] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 27.209] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 27.216] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11" [ 27.216] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14) [ 27.216] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 27.216] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 27.216] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 27.219] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 27.220] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 27.220] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 27.221] (II) config/udev: Adding input device PC Speaker (/dev/input/event8) [ 27.222] (II) No input driver specified, ignoring this device. [ 27.222] (II) This device may have been added with another device file. [ 27.224] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14) [ 27.225] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 27.225] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 27.225] (**) ACPI Virtual Keyboard Device: always reports core events [ 27.225] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event14" [ 27.225] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 27.225] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 27.225] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 27.225] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14" [ 27.225] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15) [ 27.226] (**) Option "xkb_rules" "evdev" [ 27.226] (**) Option "xkb_model" "pc105" [ 27.226] (**) Option "xkb_layout" "fr" [ 27.226] (**) Option "xkb_variant" "latin9" [ 27.239] (EE) fglrx(0): Can not enable interrupt sourceID 0xff000066! [ 27.250] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 27.276] (II) fglrx(0): EDID vendor "SEC", prod id 12364 [ 27.276] (II) fglrx(0): Printing DDC gathered Modelines: [ 27.276] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 31.976] (II) fglrx(0): EDID vendor "SEC", prod id 12364 [ 31.977] (II) fglrx(0): Printing DDC gathered Modelines: [ 31.977] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 47.129] (II) fglrx(0): EDID vendor "SEC", prod id 12364 [ 47.129] (II) fglrx(0): Printing DDC gathered Modelines: [ 47.129] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 50.559] (II) fglrx(0): EDID vendor "SEC", prod id 12364 [ 50.559] (II) fglrx(0): Printing DDC gathered Modelines: [ 50.559] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 52.807] (II) fglrx(0): EDID vendor "SEC", prod id 12364 [ 52.807] (II) fglrx(0): Printing DDC gathered Modelines: [ 52.807] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) Bug script output from package glx-alternative-fglrx: Diversions: diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions /usr/lib/mesa-diverted: total 52 drwxr-xr-x 4 root root 4096 Aug 12 17:02 . drwxr-xr-x 182 root root 36864 Aug 13 00:32 .. drwxr-xr-x 2 root root 4096 Aug 2 14:33 i386-linux-gnu drwxr-xr-x 2 root root 4096 Aug 12 17:02 x86_64-linux-gnu /usr/lib/mesa-diverted/i386-linux-gnu/: total 8 drwxr-xr-x 2 root root 4096 Aug 2 14:33 . drwxr-xr-x 4 root root 4096 Aug 12 17:02 .. /usr/lib/mesa-diverted/x86_64-linux-gnu/: total 392 drwxr-xr-x 2 root root 4096 Aug 12 17:02 . drwxr-xr-x 4 root root 4096 Aug 12 17:02 .. lrwxrwxrwx 1 root root 12 Jul 29 15:02 libGL.so.1 -> libGL.so.1.2 -rw-r--r-- 1 root root 391896 Jul 29 15:02 libGL.so.1.2 Alternative 'glx': glx - auto mode link currently points to /usr/lib/fglrx /usr/lib/fglrx - priority 99 slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1 slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so /usr/lib/mesa-diverted - priority 5 slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 Current 'best' version is '/usr/lib/fglrx'. lrwxrwxrwx 1 root root 14 Aug 12 17:02 /etc/alternatives/glx -> /usr/lib/fglrx lrwxrwxrwx 1 root root 37 Aug 12 17:02 /etc/alternatives/glx--fglrx-blacklists-radeon.conf -> /etc/ati/fglrx-blacklists-radeon.conf lrwxrwxrwx 1 root root 27 Aug 12 17:02 /etc/alternatives/glx--fglrx_drv.so -> /usr/lib/fglrx/fglrx_drv.so lrwxrwxrwx 1 root root 42 Aug 12 17:02 /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1 lrwxrwxrwx 1 root root 30 Aug 12 17:02 /etc/alternatives/glx--linux-libglx.so -> /usr/lib/fglrx/fglrx-libglx.so File System: lrwxrwxrwx 1 root root 21 Aug 12 17:02 /usr/lib/glx -> /etc/alternatives/glx lrwxrwxrwx 1 root root 50 Aug 12 17:02 /usr/lib/x86_64-linux-gnu/libGL.so.1 -> /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -rw-r--r-- 1 root root 431600 Jul 18 10:16 /usr/lib/xorg/modules/extensions/libglx.so -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages fglrx-legacy-driver depends on: ii debconf [debconf-2.0] 1.5.44 ii dpkg 1.16.4.3 ii glx-alternative-fglrx 0.2.90 ii libc6 2.13-33 ii libfglrx-legacy 8.97.100.3-1 ii libgl1-mesa-glx [libgl1] 8.0.4-1 ii libx11-6 2:1.5.0-1 ii libxext6 2:1.3.1-2 ii libxrandr2 2:1.3.2-2 ii libxrender1 1:0.9.7-1 ii xserver-xorg-core [xorg-video-abi-12] 2:1.12.3-1 Versions of packages fglrx-legacy-driver recommends: ii fglrx-legacy-atieventsd 8.97.100.3-1 pn fglrx-legacy-glx-ia32 <none> ii fglrx-legacy-modules-dkms [fglrx-kernel-8.97.100.3] 8.97.100.3-1 ii libgl1-fglrx-legacy-glx 8.97.100.3-1 pn libgl1-fglrx-legacy-glx-i386 <none> Versions of packages fglrx-legacy-driver suggests: pn amd-opencl-icd-legacy <none> ii fglrx-legacy-control 8.97.100.3-1 pn xvba-va-driver <none> -- debconf information: fglrx-driver/removed-but-enabled-in-xorg-conf: fglrx-driver/check-xorg-conf-on-removal: true * fglrx-driver/needs-xorg-conf-to-enable: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org