Package: printer-driver-hpcups Version: 3.12.6-3 Severity: normal >From Bug#522595 (closed by Brian Potkin):
> This bug report was submitted against a version of CUPS that is no > longer supported in Debian. Fair enough. I just retested it with cups 1.5.3-1 and cups-filters 1.0.18-2+b1 (both from testing/unstable). The problem is the same -- repeated below for convenience: With or without the magic line *DefaultOutputOrder: "reverse" in /etc/cups/psc.ppd, the pages come out in 'normal' order (first page first). However, the lp option '-o output-order=reverse' does reverse the order. e.g. this works fine: lp -o output-order=reverse -o page-ranges=123-184 book-indexing.pdf (but it doesn't matter whether the ppd has the DefaultOutputOrder line). The printer is an HP PSC 2710 all-in-one scanner/fax/inkjet printer. I'm filing the bug against printer-driver-hpcups because the PPD has this line: *cupsFilter: "application/vnd.cups-raster 0 hpcups" and hpcups is in the printer-driver-hpcups package. -- Package-specific info:
$ hp-check -r HP Linux Imaging and Printing System (ver. 3.12.6) Dependency/Version Check Utility ver. 15 Copyright (c) 2001-14 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version Saving output in log file: /home/sanjoy/writing-HOWTOS/hp-check.log Initializing. Please wait... warning: debian-testing version is not supported. Using debian-6.0.5 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 3.2.0-3-686-pae #1 SMP Thu Jun 28 08:56:46 UTC 2012 GNU/Linux Host: approx Proc: 3.2.0-3-686-pae #1 SMP Thu Jun 28 08:56:46 UTC 2012 GNU/Linux Distribution: debian testing ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.12.6 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for debian distro testing version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.12.6 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.12.6 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes hpijs-only-build=no lite-build=no udev-acl-rules=yes udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [installation] date_time = 09/12/2012 11:11:32 version = 3.12.6 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> -------------------------- | External Dependencies | -------------------------- gs Ghostscript REQUIRED 7.05 9.05 OK - network Network-wget OPTIONAL - 1.13.4 OK - dbus DBus REQUIRED - 1.6.0 OK - scanimage Shell-Scanning OPTIONAL 1.0 1.0.22 OK - policykit Admin-Policy-framework OPTIONAL - 0.105 OK - xsane SANE-GUI OPTIONAL 0.9 0.998 OK - cups CUPS REQUIRED 1.1 1.5.3 OK 'CUPS Scheduler is running' ------------------------- | General Dependencies | ------------------------- reportlab Python-PDF-Lib OPTIONAL 2.0 2.5 OK - libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK - pil Python-Image-Lib OPTIONAL - 1.1.7 OK - error: pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.3 MISSING 'pyqt4-dbus needs to be installed' libjpeg JPEG-Lib REQUIRED - - OK - libpthread POSIX-Threads-Lib REQUIRED - 2.13 OK - python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK - python-devel Python-SDK REQUIRED 2.2 2.7.3 OK - pyqt4 Python-Qt4 REQUIRED 4.0 4.9.3 OK - cups-devel CUPS-SDK REQUIRED - 1.5.3 OK - error: sane-devel SANE-SDK REQUIRED - - MISSING 'sane-devel needs to be installed' error: libusb USB-Lib REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane Scan-Lib REQUIRED - - OK - cups-image CUPS-Image-Lib REQUIRED - 1.5.3 OK - error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.4.3 MISSING 'libnetsnmp-devel needs to be installed' python-xml Python-XML-Lib REQUIRED - 2.1.0 OK - python-notify Desktop-notifications OPTIONAL - - OK - ---------------------- | Python Extentions | ---------------------- cupsext CUPS-Extension REQUIRED - 3.12.6 OK - pcardext PhotoCard-Extension REQUIRED - 3.12.6 OK - hpmudext IO-Extension REQUIRED - 3.12.6 OK - ----------------------- | Scan Configuration | ----------------------- hpaio HPLIP-SANE-Backend REQUIRED - 3.12.6 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.12.6 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ No Scanner found. -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- amy --- Type: Unknown Device URI: socket://10.0.0.3 PPD: /etc/cups/ppd/amy.ppd PPD Description: HP Photosmart c4500 Series, hpcups 3.12.6 Printer status: printer amy is idle. enabled since Wed 30 Dec 2009 10:01:01 PM EST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. colorlj ------- Type: Unknown Device URI: socket://192.168.101.11 PPD: /etc/cups/ppd/colorlj.ppd PPD Description: HP Color LaserJet 4600 v3010.107 Postscript (recommended) Printer status: printer colorlj is idle. enabled since Wed 12 Sep 2012 10:34:18 AM EDT warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. colorlj/pdf2up -------------- Type: Unknown Device URI: socket://192.168.101.11 colorlj/raw ----------- Type: Unknown Device URI: socket://192.168.101.11 colorlj/simplex --------------- Type: Unknown Device URI: socket://192.168.101.11 cshl ---- Type: Unknown Device URI: socket://143.48.10.8 PPD: /etc/cups/ppd/cshl.ppd PPD Description: Xerox Phaser 6360DN Foomatic/Postscript Printer status: printer cshl is idle. enabled since Mon 07 Mar 2011 11:14:36 AM EST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. cwa --- Type: Unknown Device URI: socket://128.138.103.253 PPD: /etc/cups/ppd/cwa.ppd PPD Description: HP LaserJet 5000 Series Postscript (recommended) Printer status: printer cwa is idle. enabled since Fri 08 Apr 2011 12:30:13 PM EDT warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. mh235 ----- Type: Unknown Device URI: socket://10.24.10.225 PPD: /etc/cups/ppd/mh235.ppd PPD Description: Xerox WorkCentre 7328 Foomatic/Postscript (recommended) Printer status: printer mh235 is idle. enabled since Tue 11 Sep 2012 09:51:50 AM EDT warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. mh271 ----- Type: Unknown Device URI: socket://10.24.10.229 PPD: /etc/cups/ppd/mh271.ppd PPD Description: Xerox WorkCentre 5632/5638/5645/5655 Printer status: printer mh271 is idle. enabled since Tue 11 Sep 2012 10:43:32 AM EDT warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. mh271/duplex ------------ Type: Unknown Device URI: socket://10.24.10.229 mh271/saver ----------- Type: Unknown Device URI: socket://10.24.10.229 mh271take2 ---------- Type: Unknown Device URI: socket://10.24.10.225 PPD: /etc/cups/ppd/mh271take2.ppd PPD Description: Xerox WorkCentre 7345 Foomatic/pxlcolor (recommended) Printer status: printer mh271take2 is idle. enabled since Tue 04 Oct 2011 08:41:31 AM EDT warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. psc --- Type: Unknown Device URI: socket://HomeJet PPD: /etc/cups/ppd/psc.ppd PPD Description: HP Photosmart 2700 Series, hpcups 3.12.4 Ready to print. warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. tempe ----- Type: Printer Device URI: hp:/usb/HP_LaserJet_1020?serial=JL50TD1 PPD: /etc/cups/ppd/tempe.ppd PPD Description: HP LaserJet 1020 Foomatic/foo2zjs-z1 (recommended) Printer status: printer tempe is idle. enabled since Sat 02 Jan 2010 08:18:33 PM EST error: Required plug-in status: Not installed error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_1020?serial=JL50TD1 error: Device not found error: Communication status: Failed tll --- Type: Unknown Device URI: http://tllp PPD: /etc/cups/ppd/tll.ppd PPD Description: HP Color LaserJet 4650 Postscript (recommended) Printer status: printer tll is idle. enabled since Fri 11 Mar 2011 02:23:03 PM EST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. -------------- | PERMISSION | -------------- error: groups user-groups Required - - MISSING ['lp'] ----------- | SELINUX | ----------- SELinux disabled Optional - - OK - ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'python-qt4-dbus' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible Missing Optional Dependencies ----------------------------- None Total Errors: 16 Total Warnings: 0 Re-run 'hp-check --fix' command to prompt and fix the issues. Done.
-- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages printer-driver-hpcups depends on: ii cups 1.5.3-1 ii cups-ppdc [cupsddk] 1.5.3-1 ii cupsddk 1.5.3-1 ii ghostscript-cups 9.05~dfsg-6 ii libc6 2.13-35 ii libcups2 1.5.3-1 ii libcupsimage2 1.5.3-1 ii libdbus-1-3 1.6.0-1 ii libgcc1 1:4.7.1-7 ii libhpmud0 3.12.6-3 ii libjpeg8 8d-1 ii libssl1.0.0 1.0.1c-4 ii libstdc++6 4.7.1-7 printer-driver-hpcups recommends no packages. Versions of packages printer-driver-hpcups suggests: ii hplip 3.12.6-3 ii hplip-doc 3.12.6-3 -- no debconf information