Package: src:linux
Version: 3.16.7-ckt4-3
Severity: normal
Dear Maintainer,
often when I use my bluetooth speakers for audio output, my Wi-Fi connection
becomes unusable slow. When I stop the playback and wait a few seconds I can
use Wi-Fi again.
The Wi-Fi connection never breaks completely, I stay connected but I can't even
send or receive e-mails.
I'm affected by this bug on an HP Folio 13-2000 notebook with an Intel
Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008b] adapter. Since
I can't reproduce it with another notebook using the same WLAN and the same
bluetooth speakers I guess it's hardware related.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/rosa-root ro quiet splash
** Not tainted
** Kernel log:
[ 154.133125] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 154.755897] wlan0: authenticate with 70:72:3c:20:76:08
[ 154.766082] wlan0: send auth to 70:72:3c:20:76:08 (try 1/3)
[ 154.768436] wlan0: authenticated
[ 154.769119] wlan0: associate with 70:72:3c:20:76:08 (try 1/3)
[ 154.773148] wlan0: RX AssocResp from 70:72:3c:20:76:08 (capab=0x431 status=0
aid=2)
[ 154.782186] wlan0: associated
[ 154.782236] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 154.782302] cfg80211: Calling CRDA for country: CA
[ 154.785394] cfg80211: Regulatory domain changed to country: CA
[ 154.785399] cfg80211: DFS Master region: FCC
[ 154.785402] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 154.785406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000
mBm), (N/A)
[ 154.785410] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 1700 mBm), (N/A)
[ 154.785415] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2400 mBm), (0 s)
[ 154.785419] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400
mBm), (0 s)
[ 154.785422] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000
mBm), (N/A)
[ 161.990013] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
[ 162.182647] usb 1-1.2: New USB device found, idVendor=8086, idProduct=0189
[ 162.182651] usb 1-1.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 172.073227] input: 00:02:3C:49:93:08 as /devices/virtual/input/input17
[ 662.130063] tun: Universal TUN/TAP device driver, 1.6
[ 662.130068] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 1727.831947] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[ 1727.961783] usb 2-2: New USB device found, idVendor=1058, idProduct=1100
[ 1727.961792] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1727.961797] usb 2-2: Product: My Book
[ 1727.961801] usb 2-2: Manufacturer: Western Digital
[ 1727.961806] usb 2-2: SerialNumber: 57442D574341563530313235303133
[ 1727.979956] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 1727.980136] scsi6 : usb-storage 2-2:1.0
[ 1727.980368] usbcore: registered new interface driver usb-storage
[ 1728.980093] scsi 6:0:0:0: Direct-Access WD 10EADS External 1.75
PQ: 0 ANSI: 4
[ 1728.980932] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1728.981261] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 1728.981599] sd 6:0:0:0: [sdb] Write Protect is off
[ 1728.981605] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1728.982050] sd 6:0:0:0: [sdb] No Caching mode page found
[ 1728.982057] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1729.003049] sdb: sdb1
[ 1729.005054] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 1729.861553] sha256_ssse3: Using AVX optimized SHA-256 implementation
[ 1730.112760] EXT4-fs (dm-4): warning: maximal mount count reached, running
e2fsck is recommended
[ 1730.121083] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 2192.334964] usb 2-2: USB disconnect, device number 2
[ 2192.603577] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[ 2192.733304] usb 2-2: New USB device found, idVendor=1058, idProduct=1100
[ 2192.733314] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2192.733319] usb 2-2: Product: My Book
[ 2192.733323] usb 2-2: Manufacturer: Western Digital
[ 2192.733327] usb 2-2: SerialNumber: 57442D574341563530313235303133
[ 2192.734329] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2192.734651] scsi7 : usb-storage 2-2:1.0
[ 2193.364260] usb 2-2: USB disconnect, device number 3
[ 3213.427171] input: 00:02:3C:49:93:08 as /devices/virtual/input/input18
[ 3375.406780] Loading kernel module for a network device with CAP_SYS_MODULE
(deprecated). Use CAP_NET_ADMIN and alias netdev- instead.
[ 4851.734371] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 4851.742536] JFS: nTxBlock = 8192, nTxLock = 65536
[ 4851.759630] ntfs: driver 2.1.30 [Flags: R/W MODULE].
[ 4851.772813] QNX4 filesystem 0.2.3 registered.
[ 4851.847091] raid6: sse2x1 5198 MB/s
[ 4851.914737] raid6: sse2x2 6781 MB/s
[ 4851.982380] raid6: sse2x4 7791 MB/s
[ 4851.982384] raid6: using algorithm sse2x4 (7791 MB/s)
[ 4851.982386] raid6: using ssse3x2 recovery algorithm
[ 4851.984158] xor: automatically using best checksumming function:
[ 4852.022164] avx : 15808.000 MB/sec
[ 4852.057117] Btrfs loaded
[ 4852.334299] EXT4-fs (sda2): unable to read superblock
[ 4852.336119] EXT4-fs (sda2): unable to read superblock
[ 4852.338862] EXT4-fs (sda2): unable to read superblock
[ 4852.364172] XFS (sda2): Invalid superblock magic number
[ 4852.371321] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 4852.371615] FAT-fs (sda2): bogus number of reserved sectors
[ 4852.371620] FAT-fs (sda2): Can't find a valid FAT filesystem
[ 4852.374618] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 4852.374957] FAT-fs (sda2): bogus number of reserved sectors
[ 4852.374964] FAT-fs (sda2): Can't find a valid FAT filesystem
[ 4852.383798] MINIX-fs: unable to read superblock
[ 4852.392727] attempt to access beyond end of device
[ 4852.392737] sda2: rw=16, want=3, limit=2
[ 4852.392743] hfsplus: unable to find HFS+ superblock
[ 4852.395276] qnx4: no qnx4 filesystem (no root dir).
[ 4852.397468] You didn't specify the type of your ufs filesystem
mount -t ufs -o
ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 4852.401565] hfs: can't find a HFS filesystem on dev sda2
[ 5239.520203] usb 4-1.2: USB disconnect, device number 3
[ 5894.817772] usb 4-1.2: new full-speed USB device number 4 using ehci-pci
[ 5894.913885] usb 4-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 5894.913895] usb 4-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5894.913900] usb 4-1.2: Product: USB Receiver
[ 5894.913904] usb 4-1.2: Manufacturer: Logitech
[ 5894.921662] logitech-djreceiver 0003:046D:C52B.0008: hiddev0,hidraw0: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
[ 5894.979925] input: Logitech Unifying Device. Wireless PID:4002 as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0008/0003:046D:C52B.0009/input/input19
[ 5894.980353] logitech-djdevice 0003:046D:C52B.0009: input,hidraw1: USB HID
v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on
usb-0000:00:1d.0-1.2:1
[ 5894.981579] input: Logitech Unifying Device. Wireless PID:101b as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0008/0003:046D:C52B.000A/input/input20
[ 5894.982082] logitech-djdevice 0003:046D:C52B.000A: input,hidraw2: USB HID
v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on
usb-0000:00:1d.0-1.2:2
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Folio 13 - 2000 Notebook PC
product_version: 0687100400204A00000330100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.19
board_vendor: Hewlett-Packard
board_name: 1899
board_version: 46.80
** Loaded modules:
nls_utf8
btrfs
xor
raid6_pq
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
libcrc32c
sha256_ssse3
sha256_generic
usb_storage
tun
uinput
ctr
ccm
binfmt_misc
bnep
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_hdmi
snd_hda_codec_idt
snd_hda_codec_generic
x86_pkg_temp_thermal
intel_powerclamp
arc4
intel_rapl
coretemp
hp_wmi
sparse_keymap
iwldvm
kvm
uvcvideo
ecb
mac80211
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
joydev
media
btusb
psmouse
pcspkr
bluetooth
iwlwifi
serio_raw
6lowpan_iphc
rtsx_pci_ms
cfg80211
memstick
lpc_ich
i2c_i801
rfkill
tpm_tis
snd_hda_intel
tpm
snd_hda_controller
snd_hda_codec
snd_hwdep
ac
mei_me
battery
snd_pcm
mei
snd_timer
hp_wireless
intel_smartconnect
snd
soundcore
evdev
shpchp
processor
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
hid_logitech_dj
usbhid
hid
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
rtsx_pci_sdmmc
mmc_core
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
i915
ehci_pci
xhci_hcd
libata
ehci_hcd
i2c_algo_bit
drm_kms_helper
scsi_mod
r8169
mii
rtsx_pci
drm
mfd_core
usbcore
usb_common
i2c_core
thermal
fan
wmi
video
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at c2704000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c2709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at c2700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: c2600000-c26fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c1600000-c25fffff
Prefetchable memory behind bridge: 00000000c0500000-00000000c14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: c1500000-c15fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c2708000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC
Controller [8086:1c49] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at c2707000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c2705000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030
[Rainbow Peak] [8086:008b] (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5315]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at c2600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI
Express Card Reader [10ec:5209] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at c1600000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
09:00.0 USB controller [0c03]: Fresco Logic FL1009 USB 3.0 Host Controller
[1b73:1009] (rev 02) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1500000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at c1510000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at c1511000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 004 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 8086:0189 Intel Corp.
Bus 001 Device 003: ID 1bcf:2c07 Sunplus Innovation Technology Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-20
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
