Package: openocd Version: 0.8.0-4 Severity: important Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Attempted connection between Olimex ARM-USB-OCD / LPC-microcontroller and 'jessie' host for programming/debugging. * What exactly did you do (or not do) that was effective (or ineffective)? Attempted to edit interface script /usr/share/openocd/scripts/interface/olimex-arm-usb-ocd.cfg, which was ineffective. Tried using 'wheezy' system, which uses an older version of openocd. This worked, showing that the failure is a consequence of a change in openocd that no longer supports the ft2232 interface. (That system cannot be substituted for whole job, but demonstrates that the problem is with the newer software rather than the hardware). Also tried updating to stretch versions of openocd (and supporting libraries). This did not change the script, so (unsurprisingly) failed to fix the problem. * What was the outcome of this action? Various error messages, logs, etc., all indicating that the connection between the linux host and the target embedded system was not established. * What outcome did you expect instead? A proper connection as occurred with a wheezy system. PLEASE update the scripts so that they will work with the ftdi protocol. THANKS! *** End of the template - remove these template lines *** -- System Information: Debian Release: 8.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.7-ckt11 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages openocd depends on: ii libc6 2.19-18+deb8u1 ii libftdi1 0.20-3 ii libhidapi-hidraw0 0.8.0~rc1+git20140201.3a66d4e+dfsg-3 ii libusb-0.1-4 2:0.1.12-25 ii libusb-1.0-0 2:1.0.19-1 openocd recommends no packages. openocd suggests no packages. -- no debconf information