Package: installation-reports Boot method: network Image version: 2006/02/10 http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 2006/02/11 Machine: Epson Direct Endeavor 5000 (Laptop Model) Processor: Mobile Pentium4 1.7GHz Memory: 1GB Partitions: 6GB /, 32GB /home, 1.5GB swap Output of lspci and lspci -n: lspci 0000:00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 04) 0000:00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) 0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) 0000:00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) 0000:00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) 0000:00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02) 0000:00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] 0000:02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) 0000:02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) 0000:02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller lspci -n 0000:00:00.0 0600: 8086:1a30 (rev 04) 0000:00:01.0 0604: 8086:1a31 (rev 04) 0000:00:1d.0 0c03: 8086:2482 (rev 02) 0000:00:1d.1 0c03: 8086:2484 (rev 02) 0000:00:1e.0 0604: 8086:2448 (rev 42) 0000:00:1f.0 0601: 8086:248c (rev 02) 0000:00:1f.1 0101: 8086:248a (rev 02) 0000:00:1f.3 0c05: 8086:2483 (rev 02) 0000:00:1f.5 0401: 8086:2485 (rev 02) 0000:00:1f.6 0703: 8086:2486 (rev 02) 0000:01:00.0 0300: 1002:4c57 0000:02:05.0 0200: 10ec:8139 (rev 10) 0000:02:07.0 0607: 1180:0476 (rev a8) 0000:02:07.1 0607: 1180:0476 (rev a8) 0000:02:07.2 0c00: 1180:0552 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: I'm quite fond of this distribution. Some minor problems Time setting is incorrect. At first, the clock was set to 9 hours advanced to JST (it shouls be +9:00GMT). During the X window installation process, the installer asked the resolution of the display (a laptop panel). I'v selected some resolution, but no selection is written in xorg.conf file (only 640x480 is in the file). The holizontal/vertical reflesh rates in the original file also are not proper. It seems to correspond to a low resolution CRT display. It was neccessery to change xorg.conf file after installation. After changing the xorg.conf file, I can get correct resolution (UXGA, 24bit) In GNOME desktop, Japanese keyboard layout seems to be pertly incorrect. Some keys (such as ']', '}', '_') are not effective in the original setting. This problem can be avoided by changing keyboard layout from pc105/Japanese-variation to jp106, using the GNOME preference utility. Using locale ja_JP.UTF-8, mlterm cannot display Japanese characters correctly. In the ja_JP.EUC-JP locale, this problem does not occur. Error message is sown when I launch mlterm from another terminal. font -efont-fixed medium-r-normal--16-*-iso10646-1 couldn't be loaded OSS sound (default setting) did not work, ALSA works pretty well. -- Teruo KOYAMA mail: t_koyama<at>.nii.ac.jp -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]