Package: arduino-mk
Version: 1.5.2-2.1
Followup-For: Bug #856870
X-Debbugs-Cc: d...@shallowsky.com
Dear Maintainer,
This bug is still a problem in April 2024. I built in an old project that used
to work with arduino-mk, but now, make-upload fails with:
<charon>- make upload ~/src/arduino/blink
-------------------------
Arduino.mk Configuration:
- [AUTODETECTED] CURRENT_OS = LINUX
- [AUTODETECTED] ARDUINO_DIR = /usr/share/arduino
- [COMPUTED] ARDMK_DIR = /usr/share/arduino (relative to Common.mk)
- [AUTODETECTED] ARDUINO_VERSION = 1819
- [DEFAULT] ARCHITECTURE = avr
- [DEFAULT] ARDMK_VENDOR = arduino
- [AUTODETECTED] ARDUINO_PREFERENCES_PATH =
/home/akkana/.arduino15/preferences.txt
- [AUTODETECTED] ARDUINO_SKETCHBOOK = /home/akkana/Arduino (from arduino
preferences file)
- [BUNDLED] AVR_TOOLS_DIR = /usr/share/arduino/hardware/tools/avr
(in Arduino distribution)
- [COMPUTED] ARDUINO_LIB_PATH = /usr/share/arduino/libraries (from
ARDUINO_DIR)
- [COMPUTED] ARDUINO_PLATFORM_LIB_PATH =
/usr/share/arduino/hardware/arduino/avr/libraries (from ARDUINO_DIR)
- [COMPUTED] ARDUINO_VAR_PATH =
/usr/share/arduino/hardware/arduino/avr/variants (from ARDUINO_DIR)
- [COMPUTED] BOARDS_TXT =
/usr/share/arduino/hardware/arduino/avr/boards.txt (from ARDUINO_DIR)
- [DEFAULT] USER_LIB_PATH = /home/akkana/Arduino/libraries (in user
sketchbook)
- [DEFAULT] PRE_BUILD_HOOK = pre-build-hook.sh
- [USER] BOARD_TAG = uno
- [COMPUTED] CORE = arduino (from build.core)
- [COMPUTED] VARIANT = standard (from build.variant)
- [COMPUTED] OBJDIR = build-uno (from BOARD_TAG)
- [COMPUTED] ARDUINO_CORE_PATH =
/usr/share/arduino/hardware/arduino/avr/cores/arduino (from ARDUINO_DIR,
BOARD_TAG and boards.txt)
- [ASSUMED] MONITOR_BAUDRATE = 9600
- [DEFAULT] OPTIMIZATION_LEVEL = s
- [DEFAULT] MCU_FLAG_NAME = mmcu
- [DEFAULT] CFLAGS_STD = -std=gnu11 -flto -fno-fat-lto-objects
- [DEFAULT] CXXFLAGS_STD = -std=gnu++11 -fno-threadsafe-statics -flto
- [AUTODETECTED] DEVICE_PATH = /dev/ttyACM0
- [DEFAULT] FORCE_MONITOR_PORT =
- [AUTODETECTED] Size utility: AVR-aware for enhanced output
- [COMPUTED] BOOTLOADER_PARENT =
/usr/share/arduino/hardware/arduino/avr/bootloaders (from ARDUINO_DIR)
- [COMPUTED] ARDMK_VERSION = 1.5
- [COMPUTED] CC_VERSION = 7.3.0 (avr-gcc)
-------------------------
mkdir -p build-uno
make reset
make[1]: Entering directory '/home/akkana/src/arduino/blink'
/usr/bin/ard-reset-arduino /dev/ttyACM0
make[1]: Leaving directory '/home/akkana/src/arduino/blink'
make do_upload
make[1]: Entering directory '/home/akkana/src/arduino/blink'
/usr/share/arduino/hardware/tools/avr/bin/avrdude -q -V -p atmega328p -C
/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf -D -c arduino -b 115200
-P /dev/ttyACM0 \
-U flash:w:build-uno/blink_.hex:i
avrdude warning: cannot determine realpath() of config file
/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf: No such file or
directory
avrdude OS error: cannot determine realpath() of config file (null): Invalid
argument
avrdude error: unable to process system wide configuration file (null)
make[1]: *** [/usr/share/arduino/Arduino.mk:1462: do_upload] Error 1
make[1]: Leaving directory '/home/akkana/src/arduino/blink'
make: *** [/usr/share/arduino/Arduino.mk:1455: upload] Error 2
The problem is the same as mentioned earlier in this bug: it's running avrdude
with
-C /usr/share/arduino/hardware/tools/avr/etc/avrdude.conf
when the package actually installs that file as:
/usr/share/arduino/hardware/tools/avrdude.conf
Running the following command by hand successfully installs the binary:
/usr/share/arduino/hardware/tools/avr/bin/avrdude -q -V -p atmega328p -C
/usr/share/arduino/hardware/tools/avrdude.conf -D -c arduino -b 115200 -P
/dev/ttyACM0 -U flash:w:build-uno/blink_.hex:i
The arduino-mk package should be changed to reflect where the arduino package
is actually installing avrdude.conf (dpkg -S says it comes from arduino, not
from avrdude, oddly enough).
The problematic lines seem to be in Arduino.mk around line 426: it's comparing
whether $(ARDUINO_VERSION) is greater than 157, and the logic earlier for
calculating $ARDUINO_VERSION is rather complicated, but it ends up doing
cat /usr/share/arduino/lib/version.txt | sed -e 's/^[0-9]://g' -e
's/[.]//g' -e 's/\+.*//g' | head -c5
which ends up with ARDUINO_VERSION = 1819, so it's greater than 157, but the
path is actually in the place specified for versions less than 157. Maybe it
moved, then moved back?
As a workaround, I commented out the version check as follows:
ifndef AVRDUDE_CONF
# ifeq ($(shell expr $(ARDUINO_VERSION) '>' 157), 1)
# AVRDUDE_CONF = $(AVR_TOOLS_DIR)/etc/avrdude.conf
# else
AVRDUDE_CONF = $(AVR_TOOLS_DIR)/../avrdude.conf
# endif
endif
and now make upload correctly uploads sketches to an Uno.
-- System Information:
Debian Release: trixie/sid
APT prefers unstable
APT policy: (600, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.7.9-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages arduino-mk depends on:
ii arduino 2:1.8.19+dfsg1-2
ii make 4.3-4.1
ii python3 3.11.8-1
ii python3-serial 3.5-2
Versions of packages arduino-mk recommends:
pn screen <none>
arduino-mk suggests no packages.
-- no debconf information
