Package: wodim
Version: 9:1.1.4-1
Followup-For: Bug #396194
I have a similar problem here. I created the ISO image with
vobcopy 0.5.14
dvdauthor 0.6.14
genisoimage 1.1.4
$ mkdir vobs
$ vobcopy -o vobs
$ mkdir dvd
$ dvdauthor -o dvd -t vobs/*.vob
$ dvdauthor -o dvd -T
$ genisoimage -dvd-video -o bv.iso dvd/
I had only 2 VOBs of total size around 3 GB.
[EMAIL PROTECTED]:~/download$ wodim -v bv.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
INFO: no device specified, looking for a DVD-R drive to store 2691.79 MiB...
Detected DVD-R drive: /dev/dvdrw
TOC Type: 1 = CD-ROM
scsidev: '/dev/dvdrw'
devname: '/dev/dvdrw'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.4
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-H10A '
Revision : 'JL03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B (DVD+R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R) (current)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 13993 kB/s 79x CD 10x DVD
FIFO size : 12582912 = 12288 KB
Track 01: data 2691 MB
Total size: 3091 MB (306:15.94) = 1378196 sectors
Lout start: 3091 MB (306:17/71) = 1378196 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 916908
Speed set to 11080 KB/s
Starting to write CD/DVD at speed 8.0 in real unknown mode for single
session.Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 2691 of 2691 MB written (fifo 100%) [buf 94%] 8.3x.
Track 01: Total bytes read/written: 2822545408/2822545408 (1378196 sectors).
Writing time: 290.205s
Average write speed 7.3x.
Min drive buffer fill was 94%
Fixating...
Errno: 0 (Success), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 10 00 00 00 0E 04 08 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru
0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.002s timeout 1000s
Fixating time: 0.108s
wodim: fifo had 44458 puts and 44458 gets.
wodim: fifo was 0 times empty and 8757 times full, min fill was 94%.
[EMAIL PROTECTED]:~/download$ mount /media/cdrom0
mount: block device /dev/hdb is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/hdb,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
[EMAIL PROTECTED]:~/download$ dmesg
cdrom: This disc doesn't have any tracks I recognize!
attempt to access beyond end of device
hdb: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Versions of packages wodim depends on:
ii libc6 2.3.6.ds1-13 GNU C Library: Shared libraries
ii libcap1 1:1.10-14 support for getting/setting POSIX.
Versions of packages wodim recommends:
ii genisoimage 9:1.1.4-1 Creates ISO-9660 CD-ROM filesystem
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
