Package: udev Version: 0.125-7+lenny3 Severity: important Tags: l10n When I install udev 0.146-5 on Debian testing with kernel 2.6.26-2-amd64 it fails because of an "error getting signalfd" (although the kernel supports it) in post-installation script:
r...@rm84:/home/daniel> apt-get install udev Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Lese Status-Informationen ein... Fertig Die folgenden Pakete werden aktualisiert: udev 1 aktualisiert, 0 neu installiert, 0 zu entfernen und 460 nicht aktualisiert. Es müssen noch 0B von 452kB an Archiven heruntergeladen werden. Nach dieser Operation werden 475kB Plattenplatz zusätzlich benutzt. Vorkonfiguration der Pakete ... (Lese Datenbank ... 270539 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereiten zum Ersetzen von udev 0.125-7 (durch .../archives/udev_146-5_amd64.deb) ... Entpacke Ersatz für udev ... Verarbeite Trigger für man-db ... Verarbeite Trigger für doc-base ... 1 geänderte doc-base-Datei(en) wird (werden) verarbeitet... Dokumente werden mit scrollkeeper registriert... Richte udev ein (146-5) ... Installiere neue Version der Konfigurationsdatei /etc/udev/udev.conf ... Installiere neue Version der Konfigurationsdatei /etc/init.d/udev ... error getting signalfd Cannot start udevd. (rc=5) dpkg: Fehler beim Bearbeiten von udev (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 5 zurück Fehler traten auf beim Bearbeiten von: udev E: Sub-process /usr/bin/dpkg returned an error code (1) r...@rm84:/home/daniel> The error also occurs after rebooting (both with 2.6.26-2-amd64 and 2.6.30-2-amd64 kernels) and then there is no LAN, USB, etc. However, the used standard debian kernels support signalfd: r...@rm84:/home/daniel> uname -r 2.6.26-2-amd64 r...@rm84:/home/daniel> cat /boot/config-2.6.26-2-amd64 | grep SIGNALFD CONFIG_SIGNALFD=y r...@rm84:/home/daniel> According to the resolved bugs it is checked in the pre-installation script if the mandatory kernel features are available so I'm wondering what is the reason for that signalfd failure. Fortunately, downgrading to the latest udev from stable release works, thus the system stays usable. regards Daniel -- Package-specific info: -- /etc/udev/rules.d/: /etc/udev/rules.d/: total 88 lrwxrwxrwx 1 root root 19 Sep 1 2008 025_libgphoto2.rules -> ../libgphoto2.rules lrwxrwxrwx 1 root root 22 Sep 1 2008 025_logitechmouse.rules -> ../logitechmouse.rules -rw-r--r-- 1 root root 1908 Apr 2 2009 11-hplj10xx.rules -rw-r--r-- 1 root root 3801 Aug 26 12:27 50-udev.rules -rw-r--r-- 1 root root 495 May 21 01:10 56-hpmud_support.rules -rw-r--r-- 1 root root 1601 Aug 26 12:27 60-persistent-input.rules -rw-r--r-- 1 root root 1488 Aug 26 12:27 60-persistent-storage-tape.rules -rw-r--r-- 1 root root 4873 Aug 26 12:27 60-persistent-storage.rules -rw-r--r-- 1 root root 523 Aug 26 12:27 60-persistent-v4l.rules -rw-r--r-- 1 root root 700 Sep 1 2008 70-persistent-cd.rules -rw-r--r-- 1 root root 546 Oct 23 08:30 70-persistent-net.rules -rw-r--r-- 1 root root 452 Aug 26 12:27 75-cd-aliases-generator.rules -rw-r--r-- 1 root root 4427 Aug 26 12:27 75-persistent-net-generator.rules -rw-r--r-- 1 root root 2507 Aug 26 12:27 80-drivers.rules -rw-r--r-- 1 root root 4559 Aug 26 12:27 91-permissions.rules -rw-r--r-- 1 root root 593 Aug 26 12:27 95-late.rules lrwxrwxrwx 1 root root 15 Sep 1 2008 z60_hdparm.rules -> ../hdparm.rules -rw-r--r-- 1 root root 5354 Mar 17 2009 z60_hplip.rules -rw-r--r-- 1 root root 2656 Jun 15 2008 z60_libpisock9.rules lrwxrwxrwx 1 root root 17 Sep 1 2008 z60_usbmount.rules -> ../usbmount.rules -rw-r--r-- 1 root root 6658 Oct 31 2008 z60_xserver-xorg-input-wacom.rules -- /sys/: /sys/block/fd0/dev /sys/block/loop0/dev /sys/block/loop1/dev /sys/block/loop2/dev /sys/block/loop3/dev /sys/block/loop4/dev /sys/block/loop5/dev /sys/block/loop6/dev /sys/block/loop7/dev /sys/block/ram0/dev /sys/block/ram1/dev /sys/block/ram10/dev /sys/block/ram11/dev /sys/block/ram12/dev /sys/block/ram13/dev /sys/block/ram14/dev /sys/block/ram15/dev /sys/block/ram2/dev /sys/block/ram3/dev /sys/block/ram4/dev /sys/block/ram5/dev /sys/block/ram6/dev /sys/block/ram7/dev /sys/block/ram8/dev /sys/block/ram9/dev /sys/block/sda/dev /sys/block/sda/sda1/dev /sys/block/sda/sda2/dev /sys/block/sda/sda3/dev /sys/block/sr0/dev /sys/class/bsg/0:0:0:0/dev /sys/class/bsg/1:0:0:0/dev /sys/class/hidraw/hidraw0/dev /sys/class/hidraw/hidraw1/dev /sys/class/hidraw/hidraw2/dev /sys/class/input/input0/event0/dev /sys/class/input/input0/mouse0/dev /sys/class/input/input1/event1/dev /sys/class/input/input1/mouse1/dev /sys/class/input/input2/event2/dev /sys/class/input/input3/event3/dev /sys/class/input/input4/event4/dev /sys/class/input/input5/event5/dev /sys/class/input/input6/event6/dev /sys/class/input/mice/dev /sys/class/misc/cpu_dma_latency/dev /sys/class/misc/fuse/dev /sys/class/misc/hpet/dev /sys/class/misc/mcelog/dev /sys/class/misc/network_latency/dev /sys/class/misc/network_throughput/dev /sys/class/misc/psaux/dev /sys/class/misc/snapshot/dev /sys/class/ppdev/parport0/dev /sys/class/printer/lp0/dev /sys/class/rtc/rtc0/dev /sys/class/scsi_generic/sg0/dev /sys/class/scsi_generic/sg1/dev /sys/class/sound/audio/dev /sys/class/sound/controlC0/dev /sys/class/sound/dsp/dev /sys/class/sound/mixer/dev /sys/class/sound/pcmC0D0c/dev /sys/class/sound/pcmC0D0p/dev /sys/class/sound/seq/dev /sys/class/sound/sequencer/dev /sys/class/sound/sequencer2/dev /sys/class/sound/timer/dev /sys/class/usb_device/usbdev1.1/dev /sys/class/usb_device/usbdev2.1/dev /sys/class/usb_device/usbdev2.2/dev /sys/class/usb_device/usbdev2.3/dev /sys/class/usb_endpoint/usbdev1.1_ep00/dev /sys/class/usb_endpoint/usbdev1.1_ep81/dev /sys/class/usb_endpoint/usbdev2.1_ep00/dev /sys/class/usb_endpoint/usbdev2.1_ep81/dev /sys/class/usb_endpoint/usbdev2.2_ep00/dev /sys/class/usb_endpoint/usbdev2.2_ep81/dev /sys/class/usb_endpoint/usbdev2.3_ep00/dev /sys/class/usb_endpoint/usbdev2.3_ep81/dev /sys/class/usb_endpoint/usbdev2.3_ep82/dev /sys/class/usbmon/usbmon0/dev /sys/class/usbmon/usbmon1/dev /sys/class/usbmon/usbmon2/dev /sys/devices/pci0000:00/0000:00:0b.0/usb2/2-1/dev /sys/devices/pci0000:00/0000:00:0b.0/usb2/2-2/dev /sys/devices/pci0000:00/0000:00:0b.0/usb2/dev /sys/devices/pci0000:00/0000:00:0b.1/usb1/dev -- Kernel configuration: isapnp_init not present. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages udev depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii libc6 2.9-12 GNU C Library: Shared libraries ii libselinux1 2.0.85-4 SELinux runtime shared libraries ii libvolume-id0 0.125-7 libvolume_id shared library ii lsb-base 3.2-23 Linux Standard Base 3.2 init scrip udev recommends no packages. udev suggests no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
