Package: linux-2.6
Version: 2.6.32-30
Severity: critical
Justification: breaks the whole system
Both normal and safe boot modes panicked when running the ram disk
image. Worse, the upgrade DELETED the earlier kernel image and ram disk
image. I managed to boot by editing the safe mode command line and
adding the option init=/bin/bash.
When the kernel panicks, it shows a stack trace mentioning libata.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=281d76c7-ee09-4f0e-825b-425e95d75878 ro single init=/bin/bash
** Not tainted
** Kernel log:
[ 3.331507] PM: Checking hibernation image.
[ 3.331689] PM: Error -22 checking image file
[ 3.331692] PM: Resume from disk failed.
[ 3.338369] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.338378] PM: Basic memory bitmaps created
[ 3.345712] PM: Basic memory bitmaps freed
[ 3.372024] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 3.401886] kjournald starting. Commit interval 5 seconds
[ 3.401897] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.568751] usb 2-1: New USB device found, idVendor=03f0, idProduct=0517
[ 3.568808] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.568857] usb 2-1: Product: hp LaserJet 1000
[ 3.568903] usb 2-1: Manufacturer: Hewlett-Packard
[ 3.569118] usb 2-1: configuration #1 chosen from 1 choice
[ 7.505287] usb-storage: device scan complete
[ 7.506404] scsi 6:0:0:0: Direct-Access RIM BlackBerry SD 0003
PQ: 0 ANSI: 4 CCS
[ 7.507080] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.508515] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 184.561988] EXT3 FS on sda1, internal journal
[ 1241.810372] <30>udev[382]: starting version 167
[ 1242.505471] <30>udev[405]: renamed network interface eth0 to tp
[ 1243.710686] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 1244.157244] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1244.250681] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1244.250866] ACPI: Power Button [PWRB]
[ 1244.251036] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1244.251271] ACPI: Power Button [PWRF]
[ 1244.613408] processor LNXCPU:00: registered as cooling_device0
[ 1244.614971] processor LNXCPU:01: registered as cooling_device1
[ 1244.619420] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid
0x03F0 pid 0x0517
[ 1244.619503] usbcore: registered new interface driver usblp
[ 1244.625601] parport_pc 00:06: reported by Plug and Play ACPI
[ 1244.627407] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 1244.639042] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1245.015484] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized -
upgrade BIOS?
[ 1245.015576] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not
inserted.
[ 1245.025103] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized -
upgrade BIOS or use force_addr=0xaddr
[ 1245.025165] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not
inserted.
[ 1245.089649] alim7101_wdt: Steve Hill <st...@navaho.co.uk>.
[ 1245.089710] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
[ 1245.404977] cfg80211: Using static regulatory domain info
[ 1245.405031] cfg80211: Regulatory domain: US
[ 1245.405076] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 1245.405130] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 1245.405178] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1245.405226] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1245.405274] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1245.405322] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1245.405369] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 1245.405922] cfg80211: Calling CRDA for country: US
[ 1245.609148] adm8211 0000:03:11.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1245.619583] 0000:03:11.0 (adm8211): Channel range: 1 - 11
[ 1245.619588] 0000:03:11.0 (adm8211): RFtype=1 BBPtype=1 Specific BBP=0
Transceiver=0
[ 1246.177701] phy0: Selected rate control algorithm 'minstrel'
[ 1246.178756] phy0: hwaddr 00:04:e2:7b:70:6b, Rev 0x11
[ 1246.189113] <30>udev[403]: renamed network interface wlan0 to wl
[ 1246.938086] HDA Intel 0000:00:1d.0: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 1246.938155] hda_intel: position_fix set to 1 for device 1043:81b3
[ 1247.383775] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1d.0/input/input5
[ 1252.897954] usblp0: removed
[ 1323.238716] r8169: tp: link down
[ 1323.238987] ADDRCONF(NETDEV_UP): tp: link is not ready
[ 1332.520717] ADDRCONF(NETDEV_UP): wl: link is not ready
[ 1334.724015] phy0: adm8211_write_bbp(20,7) failed postwrite (reg=0x20a61407)
[ 1334.804012] phy0: adm8211_write_bbp(21,67) failed postwrite (reg=0x20a61543)
[ 1334.884012] phy0: adm8211_write_bbp(28,0) failed postwrite (reg=0x20a61c00)
[ 1334.964011] phy0: adm8211_write_bbp(29,128) failed postwrite (reg=0x20a61d80)
[ 1334.964041] wl: direct probe to AP 00:21:91:f8:36:6e (try 1)
[ 1335.164039] wl: direct probe to AP 00:21:91:f8:36:6e (try 2)
[ 1335.364036] wl: direct probe to AP 00:21:91:f8:36:6e (try 3)
[ 1335.564036] wl: direct probe to AP 00:21:91:f8:36:6e timed out
[ 1342.551877] wl: direct probe to AP 00:21:91:f8:36:6e (try 1)
[ 1342.555358] wl: direct probe responded
[ 1342.555365] wl: authenticate with AP 00:21:91:f8:36:6e (try 1)
[ 1342.557299] wl: authenticated
[ 1342.557413] wl: associate with AP 00:21:91:f8:36:6e (try 1)
[ 1342.618834] wl: RX AssocResp from 00:21:91:f8:36:6e (capab=0x431 status=0
aid=2)
[ 1342.618840] wl: associated
[ 1342.619172] ADDRCONF(NETDEV_CHANGE): wl: link becomes ready
[ 1342.809421] padlock: VIA PadLock not detected.
[ 1353.588017] wl: no IPv6 routers present
[ 1815.276025] wl: deauthenticating from 00:21:91:f8:36:6e by local choice
(reason=3)
[ 1876.929740] r8169: tp: link down
[ 1876.929999] ADDRCONF(NETDEV_UP): tp: link is not ready
[ 1895.544239] ADDRCONF(NETDEV_UP): wl: link is not ready
[ 1897.644017] phy0: adm8211_write_bbp(17,124) failed postwrite (reg=0x20a6117c)
[ 1897.724012] phy0: adm8211_write_bbp(20,7) failed postwrite (reg=0x20a61407)
[ 1897.804011] phy0: adm8211_write_bbp(21,67) failed postwrite (reg=0x20a61543)
[ 1897.884011] phy0: adm8211_write_bbp(28,0) failed postwrite (reg=0x20a61c00)
[ 1897.964012] phy0: adm8211_write_bbp(29,128) failed postwrite (reg=0x20a61d80)
[ 1897.964049] wl: direct probe to AP 00:21:91:f8:36:6e (try 1)
[ 1898.164028] wl: direct probe to AP 00:21:91:f8:36:6e (try 2)
[ 1898.167491] wl: direct probe responded
[ 1898.167495] wl: authenticate with AP 00:21:91:f8:36:6e (try 1)
[ 1898.169479] wl: authenticated
[ 1898.169587] wl: associate with AP 00:21:91:f8:36:6e (try 1)
[ 1898.226890] wl: RX AssocResp from 00:21:91:f8:36:6e (capab=0x431 status=0
aid=2)
[ 1898.226894] wl: associated
[ 1898.227177] ADDRCONF(NETDEV_CHANGE): wl: link becomes ready
[ 1908.680007] wl: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
aes_i586 6816 1
aes_generic 25738 1 aes_i586
snd_hda_codec_analog 45530 1
snd_hda_intel 16811 0
snd_hda_codec 46002 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47226 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3576 0
arc4 974 2
snd_rawmidi 12513 1 snd_seq_midi
ecb 1405 2
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
adm8211 17898 0
mac80211 123574 1 adm8211
eeprom_93cx6 963 1 adm8211
snd_timer 12258 2 snd_pcm,snd_seq
cfg80211 87661 2 adm8211,mac80211
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
rfkill 10264 1 cfg80211
snd 34375 11
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_ali15x3 4202 0
i2c_ali1535 3974 0
soundcore 3450 1 snd
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
shpchp 21220 0
asus_atk0110 6770 0
parport_pc 15799 0
i2c_core 12696 2 i2c_ali15x3,i2c_ali1535
usblp 7899 0
processor 26327 0
button 3598 0
pci_hotplug 18065 1 shpchp
parport 22554 1 parport_pc
evdev 5609 0
pcspkr 1207 0
ext3 94212 1
jbd 32169 1 ext3
mbcache 3762 1 ext3
usbhid 28008 0
hid 50893 1 usbhid
sg 15968 0
sd_mod 25977 2
sr_mod 10770 0
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2067 0
usb_storage 30585 0
ohci_hcd 16880 0
thermal 9206 0
pata_ali 6235 0
ahci 27270 1
floppy 40923 0
libata 115753 3 ata_generic,pata_ali,ahci
r8169 25180 0
mii 2714 1 r8169
thermal_sys 9378 2 processor,thermal
scsi_mod 101429 5 sg,sd_mod,sr_mod,usb_storage,libata
ehci_hcd 27851 0
usbcore 98453 6 usblp,usbhid,usb_storage,ohci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** Network interface configuration:
auto tp
iface tp inet static
address 192.168.3.1
netmask 255.255.255.0
network 192.168.3.0
broadcast 192.168.3.255
auto wl
iface wl inet static
address 192.168.2.172
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
dns-nameservers 192.168.2.1
wpa-ssid D3
wpa-bsssid 00:21:91:F8:36:6E
wpa-psk *************
up sleep 5; /sbin/iwconfig "${IFACE}"
up /sbin/ip route add 224.0.0.0/4 dev "${IFACE}"
iface tun6to4 inet6 v4tunnel
address $(printf "2002:%02x%02x:%02x%02x::1" \
$(printf "%s\r\n%s\r\n\r\n" \
"GET / HTTP/1.1" \
"Host: checkip.dyndns.org" \
| /bin/nc checkip.dyndns.org 80 \
| /bin/sed -ne 's/.*Address: \([.0-9]*\).*/\1/p' \
| tr '.' ' ') \
)
netmask 16
endpoint 192.88.99.1
local any
ttl 64
up /sbin/ip -6 route add 2000::/3 dev tun6to4
down /sbin/ip -6 route flush dev tun6to4
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: tp: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN
qlen 1000
link/ether 00:15:f2:c3:cc:de brd ff:ff:ff:ff:ff:ff
inet 192.168.3.1/24 brd 192.168.3.255 scope global tp
3: wl: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:04:e2:7b:70:6b brd ff:ff:ff:ff:ff:ff
inet 192.168.2.172/24 brd 192.168.2.255 scope global wl
inet6 fe80::204:e2ff:fe7b:706b/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 15459 182 0 0 0 0 0 0 15459
182 0 0 0 0 0 0
tp: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wl:19482969 14365 0 0 0 0 0 0 807957
8945 0 0 0 0 0 0
*** Protocol statistics:
Ip:
14368 total packets received
0 forwarded
0 incoming packets discarded
14252 incoming packets delivered
9069 requests sent out
47 outgoing packets dropped
2 dropped because of missing route
Icmp:
69 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 62
echo replies: 7
158 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 151
echo request: 7
IcmpMsg:
InType0: 7
InType3: 62
OutType3: 151
OutType8: 7
Tcp:
12 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
13941 segments received
8768 segments send out
0 segments retransmited
0 bad segments received.
1139 resets sent
Udp:
78 packets received
150 packets to unknown port received.
0 packet receive errors
143 packets sent
UdpLite:
TcpExt:
1 packets pruned from receive queue because of socket buffer overrun
10 TCP sockets finished time wait in fast timer
12 delayed acks sent
Quick ack mode was activated 1 times
10807 packet headers predicted
24 acknowledgments not containing data payload received
424 packets collapsed in receive queue due to low socket buffer
1 DSACKs sent for old packets
IpExt:
InBcastPkts: 14
InOctets: 19275488
OutOctets: 534974
InBcastOctets: 2244
*** Device features:
lo: 0x13865
tp: 0x180
wl: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon Xpress 200 Host Bridge
[1002:5a33] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:819a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 3: Memory at e0000000 (64-bit, non-prefetchable) [size=512M]
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: c0000000-dfdfffff
Prefetchable memory behind bridge: a0000000-afffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge
[1002:5a3f]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency
L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a33]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:1a.0 PCI bridge [0604]: ALi Corporation M5249 HTT to PCI Bridge [10b9:5249]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dff00000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [c0] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
00:1c.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237]
(rev 03) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at bfffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:1c.1 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237]
(rev 03) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at bfffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:1c.2 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237]
(rev 03) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 19
Region 0: Memory at bfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:1c.3 USB Controller [0c03]: ALi Corporation USB 2.0 Controller [10b9:5239]
(rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8056]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at bffffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=0090
Capabilities: [78] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ehci_hcd
00:1d.0 Audio device [0403]: ALi Corporation High Definition Audio/AC'97 Host
Controller [10b9:5461] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:81b3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 20000ns max)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at bfff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Kernel driver in use: HDA Intel
00:1e.0 ISA bridge [0601]: ALi Corporation M1575 South Bridge [10b9:1575]
Subsystem: ALi Corporation M1575 South Bridge [10b9:1575]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 6000ns max)
00:1e.1 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU]
[10b9:7101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:1f.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c8)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:8056]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 21
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_ali
00:1f.1 SATA controller [0106]: ALi Corporation ULi M5288 SATA [10b9:5288] (rev
10) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. A8R-MVP Mainboard [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 512 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at bc00 [size=16]
Region 1: I/O ports at b880 [size=8]
Region 2: I/O ports at b800 [size=16]
Region 3: I/O ports at b480 [size=8]
Region 4: I/O ports at b400 [size=32]
Region 5: Memory at bffff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: ahci
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon
Xpress 200] [1002:5a61] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:819a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfde0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at dfeff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dfee0000 [disabled] [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [50] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information: Len=4c <?>
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [12c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [148 v1] Device Serial Number 01-00-00-00-10-ec-81-68
Capabilities: [154 v1] Power Budgeting <?>
Kernel driver in use: r8169
03:11.0 Network controller [0280]: ADMtek ADM8211 802.11b Wireless Interface
[1317:8201] (rev 11)
Subsystem: Standard Microsystems Corp [SMC] Device [10b8:2602]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min, 32000ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at dffffc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: adm8211
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0fca:8004 Research In Motion, Ltd. Blackberry Handheld
Bus 003 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 002: ID 03f0:0517 Hewlett-Packard LaserJet 1000
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-65 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
