Package: src:linux Version: 5.10.40-1 Severity: normal X-Debbugs-Cc: nwfila...@gmail.com
Dear Maintainer, Upgrading from 5.10.0-0.bpo.5-powerpc64le=5.10.24-1~bpo10+1 to 5.10.0-7-powerpc64le=5.10.40-1 has broken my X server's ability to use GL, and has, indeed, lead to markedly poor performance even in things like rxvt. Quoting /var/log/Xorg.0.log: [ 19.084] (II) LoadModule: "glx" [ 19.087] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 19.102] (II) Module glx: vendor="X.Org Foundation" [ 19.143] (II) Loading sub module "glamoregl" [ 19.143] (II) LoadModule: "glamoregl" [ 19.143] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 19.159] (II) Module glamoregl: vendor="X.Org Foundation" [ 19.573] (II) modeset(0): glamor X acceleration enabled on AMD Radeon (TM) Pro WX 7100 Graphics (POLARIS10, DRM 3.40.0, 5.10.0-7-powerpc64le, LLVM 11.0.1) [ 19.573] (II) modeset(0): glamor initialized [ 19.647] (II) Initializing extension GLX [ 19.656] (II) AIGLX: Loaded and initialized radeonsi [ 19.656] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.985] (EE) glamor0: GL error: GL_OUT_OF_MEMORY in glTexSubImage [ 21.018] (WW) glamor: Failed to allocate 48x48 FBO due to GL_OUT_OF_MEMORY. [ 21.018] (WW) glamor: Expect reduced performance. Things work just fine with the same machine on the old kernel, so I'm holding back for now, but this isn't a great long-term solution. This is a Talos II workstation, making it a little niche and therefore unsurprising that regressions have crept in, but it'd be nice to get them resolved. Any suggestions, advice, requests for further information, &c are all appreciated. I can rebuild kernels and bisect if pointed at the right git repository and tags, if that'd be a useful thing. FWIW, the same thing happened, I believe, with 5.10.0-6-powerpc64le, previously, but I no longer have it installed to check again. Thanks much in advance, --nwf; -- Package-specific info: ** Version: Linux version 5.10.0-7-powerpc64le (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.40-1 (2021-05-28) ** Command line: root=ZFS=rpool/ROOT/debian ro quiet ** Tainted: POE (12289) * proprietary module was loaded * externally-built ("out-of-tree") module was loaded * unsigned module was loaded ** Kernel log: [ 5.306593] [drm] amdgpu kernel modesetting enabled. [ 5.309579] amdgpu 0030:01:00.0: vgaarb: deactivate vga console [ 5.309753] amdgpu 0030:01:00.0: enabling device (0140 -> 0142) [ 5.309767] amdgpu 0030:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 5.644486] amdgpu 0030:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 5.644492] amdgpu: ATOM BIOS: 113-C9540101-103 [ 5.647802] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin [ 5.647819] amdgpu 0030:01:00.0: BAR 2: releasing [mem 0x6200010000000-0x62000101fffff 64bit pref] [ 5.647822] amdgpu 0030:01:00.0: BAR 0: releasing [mem 0x6200000000000-0x620000fffffff 64bit pref] [ 5.647869] amdgpu 0030:01:00.0: BAR 0: assigned [mem 0x6200000000000-0x62001ffffffff 64bit pref] [ 5.647879] amdgpu 0030:01:00.0: BAR 2: assigned [mem 0x6200200000000-0x62002001fffff 64bit pref] [ 5.647913] amdgpu 0030:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 5.647916] amdgpu 0030:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 5.648123] [drm] amdgpu: 8192M of VRAM memory ready [ 5.648128] [drm] amdgpu: 8192M of GTT memory ready. [ 5.649983] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin [ 5.650921] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin [ 5.651856] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin [ 5.652822] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin [ 5.654748] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin [ 5.657197] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin [ 5.659428] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin [ 5.661056] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin [ 5.661159] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 5.663358] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin [ 5.666276] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin [ 5.668251] amdgpu 0030:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_smc.bin [ 5.727666] snd_hda_intel 0030:01:00.1: bound 0030:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 5.946750] amdgpu 0030:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [ 6.091370] amdgpu 0030:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 6.132408] [drm] Initialized amdgpu 3.40.0 20150101 for 0030:01:00.0 on minor 0 ** Model information revision : 2.2 (pvr 004e 1202) latform : PowerNV model : T2P9D01 REV 1.01 machine : PowerNV T2P9D01 REV 1.01 Device Tree model: T2P9D01 REV 1.01 ** Loaded modules: tun(E) xt_conntrack(E) nf_conntrack_netlink(E) xfrm_user(E) xfrm_algo(E) xt_CHECKSUM(E) nft_chain_nat(E) xt_MASQUERADE(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) xt_addrtype(E) nft_counter(E) br_netfilter(E) xt_tcpudp(E) nft_compat(E) bridge(E) stp(E) llc(E) nf_tables(E) yfs(POE) libcrc32c(E) nfnetlink(E) overlay(E) binfmt_misc(E) joydev(E) cp210x(E) pl2303(E) usbserial(E) hid_generic(E) usbhid(E) hid(E) dm_crypt(E) evdev(E) dm_mod(E) crc32c_generic(E) amdgpu(E) ecb(E) xts(E) ctr(E) cbc(E) aes_generic(E) libaes(E) vmx_crypto(E) gf128mul(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) snd_intel_dspcfg(E) snd_hda_codec(E) ofpart(E) gpu_sched(E) snd_hda_core(E) ipmi_powernv(E) ttm(E) ipmi_devintf(E) powernv_flash(E) snd_hwdep(E) mtd(E) ipmi_msghandler(E) at24(E) snd_pcm(E) opal_prd(E) drm_kms_helper(E) tg3(E) snd_timer(E) regmap_i2c(E) snd(E) syscopyarea(E) xhci_pci(E) sysfillrect(E) soundcore(E) sysimgblt(E) libphy(E) fb_sys_fops(E) xhci_hcd(E) i2c_algo_bit(E) ptp(E) pps_core(E) sg(E) drm(E) fuse(E) drm_panel_orientation_quirks(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) sd_mod(E) ext4(E) crc16(E) mbcache(E) jbd2(E) cdrom(E) uas(E) usb_storage(E) usbcore(E) usb_common(E) zfs(POE) zunicode(POE) zzstd(OE) zlua(OE) zcommon(POE) znvpair(POE) zavl(POE) icp(POE) spl(OE) nvme(E) nvme_core(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E) crct10dif_common(E) ahci(E) libahci(E) ** PCI devices: 0000:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0000000/pci@0 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0100000/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) (prog-if 01 [AHCI 1.0]) Subsystem: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0100000/pci@0/sata@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 58 NUMA node: 0 IOMMU group: 0 Region 0: I/O ports at 0000 Region 1: I/O ports at 0000 Region 2: I/O ports at 0000 Region 3: I/O ports at 0000 Region 4: I/O ports at 0000 Region 5: Memory at 600c080040000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at 600c080000000 [size=256K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 0002:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0200000/pci@0 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0003:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0300000/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0003:01:00.0 USB controller [0c03]: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller [104c:8241] (rev 02) (prog-if 30 [XHCI]) Subsystem: IBM S824 (8286-42A) [1014:04b2] Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0300000/pci@0/usb-xhci@0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 56 NUMA node: 0 IOMMU group: 1 Region 0: Memory at 600c180000000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at 600c180010000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 0004:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0400000/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: [disabled] Prefetchable memory behind bridge: 0006024000000000-0006027f7fffffff [size=254G] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0004:01:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5719 Gigabit Ethernet PCIe [14e4:1657] (rev 01) Subsystem: Broadcom Inc. and subsidiaries NetXtreme BCM5719 Gigabit Ethernet PCIe [14e4:1981] Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0400000/pci@0/ethernet@0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 72 NUMA node: 0 IOMMU group: 2 Region 0: Memory at 6024000000000 (64-bit, prefetchable) [size=64K] Region 2: Memory at 6024000010000 (64-bit, prefetchable) [size=64K] Region 4: Memory at 6024000020000 (64-bit, prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0004:01:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5719 Gigabit Ethernet PCIe [14e4:1657] (rev 01) Subsystem: Broadcom Inc. and subsidiaries NetXtreme BCM5719 Gigabit Ethernet PCIe [14e4:1981] Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0400000/pci@0/ethernet@0,1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 73 NUMA node: 0 IOMMU group: 2 Region 0: Memory at 6024000030000 (64-bit, prefetchable) [size=64K] Region 2: Memory at 6024000040000 (64-bit, prefetchable) [size=64K] Region 4: Memory at 6024000050000 (64-bit, prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0005:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0500000/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0005:01:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 04) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0500000/pci@0/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 80 NUMA node: 0 Bus: primary=01, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0005:02:00.0 Multimedia video controller [0400]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 41) Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] Device tree node: /sys/firmware/devicetree/base/pciex@600c3c0500000/pci@0/pci@0/video@0 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 80 NUMA node: 0 IOMMU group: 3 Region 0: Memory at 600c280000000 (32-bit, non-prefetchable) [disabled] [size=16M] Region 1: Memory at 600c281000000 (32-bit, non-prefetchable) [disabled] [size=128K] Region 2: I/O ports at <unassigned> [disabled] Capabilities: <access denied> 0030:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0000000/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 8 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: 0006200000000000-0006203fbfffffff [size=255G] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0030:01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon Pro WX 7100] [1002:67c4] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon Pro WX 7100] [1002:0b0d] Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0000000/pci@0/vga@0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 65 NUMA node: 8 IOMMU group: 4 Region 0: Memory at 6200000000000 (64-bit, prefetchable) [size=8G] Region 2: Memory at 6200200000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at <unassigned> [disabled] Region 5: Memory at 620c000000000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at 620c000040000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: amdgpu Kernel modules: amdgpu 0030:01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0] Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0000000/pci@0/multimedia-device@0,1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 64 NUMA node: 8 IOMMU group: 4 Region 0: Memory at 620c000060000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 0031:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0100000/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 8 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0031:01:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961/SM963 [144d:a804] (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd SM963 2.5" NVMe PCIe SSD [144d:a801] Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0100000/pci@0/mass-storage@0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 57 NUMA node: 8 IOMMU group: 5 Region 0: Memory at 620c080000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme 0032:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0200000/pci@0 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 8 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0033:00:00.0 PCI bridge [0604]: IBM POWER9 Host Bridge (PHB4) [1014:04c1] (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0300000/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 8 Bus: primary=00, secondary=01, subordinate=1b, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: 0006220000000000-0006223fbfffffff [size=255G] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0033:01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 9733 33-lane, 9-port PCI Express Gen 3 (8.0 GT/s) Switch [10b5:9733] (rev b0) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0300000/pci@0/pci@0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 74 NUMA node: 8 Region 0: Memory at 620c182000000 (32-bit, non-prefetchable) [size=256K] Bus: primary=01, secondary=02, subordinate=1b, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: 80000000-ffefffff [size=2047M] Prefetchable memory behind bridge: 0006220000000000-0006223fbfffffff [size=255G] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0033:02:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 9733 33-lane, 9-port PCI Express Gen 3 (8.0 GT/s) Switch [10b5:9733] (rev b0) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0300000/pci@0/pci@0/pci@1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 75 NUMA node: 8 Bus: primary=02, secondary=03, subordinate=07, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0033:02:04.0 PCI bridge [0604]: PLX Technology, Inc. PEX 9733 33-lane, 9-port PCI Express Gen 3 (8.0 GT/s) Switch [10b5:9733] (rev b0) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0300000/pci@0/pci@0/pci@4 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 74 NUMA node: 8 Bus: primary=02, secondary=08, subordinate=0c, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: 80000000-803fffff [size=4M] Prefetchable memory behind bridge: 0006220000000000-000622001fffffff [size=512M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0033:02:05.0 PCI bridge [0604]: PLX Technology, Inc. PEX 9733 33-lane, 9-port PCI Express Gen 3 (8.0 GT/s) Switch [10b5:9733] (rev b0) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0300000/pci@0/pci@0/pci@5 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 75 NUMA node: 8 Bus: primary=02, secondary=0d, subordinate=11, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: 80400000-807fffff [size=4M] Prefetchable memory behind bridge: 0006220020000000-000622003fffffff [size=512M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0033:02:06.0 PCI bridge [0604]: PLX Technology, Inc. PEX 9733 33-lane, 9-port PCI Express Gen 3 (8.0 GT/s) Switch [10b5:9733] (rev b0) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0300000/pci@0/pci@0/pci@6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 76 NUMA node: 8 Bus: primary=02, secondary=12, subordinate=16, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: 80800000-80bfffff [size=4M] Prefetchable memory behind bridge: 0006220040000000-000622005fffffff [size=512M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0033:02:07.0 PCI bridge [0604]: PLX Technology, Inc. PEX 9733 33-lane, 9-port PCI Express Gen 3 (8.0 GT/s) Switch [10b5:9733] (rev b0) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/pciex@620c3c0300000/pci@0/pci@0/pci@7 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 77 NUMA node: 8 Bus: primary=02, secondary=17, subordinate=1b, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: 80c00000-80ffffff [size=4M] Prefetchable memory behind bridge: 0006220060000000-000622007fffffff [size=512M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> ** USB devices: Bus 002 Device 003: ID 05e3:0612 Genesys Logic, Inc. Hub Bus 002 Device 004: ID 2109:0812 VIA Labs, Inc. VL812 Hub Bus 002 Device 002: ID 2109:0812 VIA Labs, Inc. VL812 Hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 020: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 001 Device 018: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 001 Device 016: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 014: ID 05e3:0610 Genesys Logic, Inc. Hub Bus 001 Device 011: ID 1b1c:0c10 Corsair Commander PRO Bus 001 Device 008: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 006: ID 05e3:0610 Genesys Logic, Inc. Hub Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. Hub Bus 001 Device 007: ID 2001:f103 D-Link Corp. DUB-H7 7-port USB 2.0 hub Bus 001 Device 019: ID 045e:0023 Microsoft Corp. Trackball Optical Bus 001 Device 017: ID 3297:4974 ZSA Technology Labs ErgoDox EZ Bus 001 Device 015: ID 10c4:ea60 Silicon Labs CP210x UART Bridge Bus 001 Device 012: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 013: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller Bus 001 Device 010: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 009: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port / Mobile Action MA-8910P Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 004: ID 2109:2812 VIA Labs, Inc. VL812 Hub Bus 001 Device 002: ID 2109:2812 VIA Labs, Inc. VL812 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'testing-security'), (500, 'testing-debug'), (500, 'stable-updates'), (500, 'stable-debug'), (500, 'proposed-updates-debug'), (500, 'stable'), (400, 'testing'), (300, 'unstable') Architecture: ppc64el (ppc64le) Kernel: Linux 5.10.0-7-powerpc64le (SMP w/176 CPU threads) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.10.0-7-powerpc64le depends on: ii initramfs-tools [linux-initramfs-tool] 0.140 ii kmod 28-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-7-powerpc64le recommends: ii apparmor 2.13.6-10 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.10.0-7-powerpc64le suggests: pn debian-kernel-handbook <none> ii grub-ieee1275 2.04-18 pn linux-doc-5.10 <none> pn mkvmlinuz <none> Versions of packages linux-image-5.10.0-7-powerpc64le is related to: ii firmware-amd-graphics 20210315-2 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20210315-2 ii firmware-misc-nonfree 20210315-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information