Hi,Andreas Please try this PMON, thanks. http://updates.lemote.com/pmon/pmon-A1004-2.0.8.bin
于 2013年07月25日 08:33, che...@lemote.com 写道: > Hi, Qian and Chen > > Please see see, Andreas use http://dev.lemote.com/files/upload/lm/kernel > /testing/pmon-A1004-2.1.3.bin on A1004 notebook but have boot failure. > >> * che...@lemote.com (che...@lemote.com) [130626 02:47]: >>> I see that your PMON is *not* from lemote, and I think this is the root >>> cause of boot failure. Please use this one, thanks. >>> http://dev.lemote.com/files/upload/lm/kernel/testing/pmon-A1004-2.1.3.bin >> >> Booting this ends up with: >> SuperIO RTC >> Pull up GPIO15. >> NODE 0 MEMORY CONFIG BEGIN >> >> Probing DDR SLOT: 00000000 >> >> Set DDR frequency by software >> >> Enable register space of MEMORY >> DDR Interleave space open : 0x00000000 - 0x0FFFFFFF >> DDR Interleave using Bit 13 >> DDR Interleave space open : 0x1_1000_0000 - 0x1_FFFF_FFFF >> DDR Interleave using Bit 13 >> Disable register space of MEMORY >> Disable cpu buffered read >> >> and stops there. Doesn't seem to be entirly right to me then. >> >> (whereas the output of the other one continues with >> SuperIO RTC >> >> spd_info_store begain. >> >> spd_info_store done. >> Copy PMON to execute location... >> start = 0x81000000 >> s0 = 0x3ec00000 >> 81080000 >> copy text section done. >> Copy PMON to execute location done. >> sp=80ffc000 >> Uncompressing >> Bios....................................................................OK,Booting >> Bios >> memsz 2032 >> FREQ >> RTC: 13-07-24 20:10:07 >> FREI >> cpu fre 900000000 >> DONE >> DEVI >> init uhci cmd called >> ENVI >> MAPV >> in envinit >> ) >> >> >> Any hints for me? >> >> >> >> Regards, >> Andi >> > > -- To UNSUBSCRIBE, email to debian-mips-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/51f07aad.9060...@lemote.com