I suggest you try look at splix package and its supported printers. I own older Xerox Phaser 3122 (black laserjet) and it is much same as some other Samsung that has support in splix. Look also in /var/log/cups/error_log and post it. Check if you have all the foomatic stuff (foomatic-filters, foomatic- db, ghostscript, etc). I dont have the printer connected directly to pc, but it works ok on linux (I have connected that on openwrt router, through usb).
Robert Dne Út 22. prosince 2009 19:14:11 Steve Kleene napsal(a): > I am failing to get CUPS working with a new Xerox Phaser 6280DN color laser > printer connected by USB. The OS is Debian Lenny. The printer and driver > seem to be installed OK, and I can successfully queue up print jobs from > acroread or with a command such as this: > > lpr -P Phaser_6280DN test.ps > > However, the jobs get queued and don't print. They show as pending (Pages > = Unknown). If I try to Reprint from http://localhost:631/, I get an > error "Job #12 is not complete!". The reprint request adds the following > entries to /var/log/cups/access_log: > > localhost - root [22/Dec/2009:11:48:30 -0500] "GET > /jobs/?op=restart-job&job_id=12&job_printer_uri=/printers/Phaser_6280DN > HTTP/1.1" 200 0 - - localhost - - [22/Dec/2009:11:48:30 -0500] "POST /jobs > HTTP/1.1" 200 139 Restart-Job client-error-not-possible localhost - root > [22/Dec/2009:11:48:30 -0500] "GET > /jobs/?op=restart-job&job_id=12&job_printer_uri=/printers/Phaser_6280DN > HTTP/1.1" 200 3300 - - > > Here's some history. The printer was automatically listed in printers.conf > when I connected it and turned it on. I installed a driver provided by the > Xerox site. It is here: > > /etc/cups/ppd/Phaser_6280DN.ppd > > and shows the following: > > *PCFileName: "FOO2LAVA.PPD" > *Manufacturer: "Xerox" > *Product: "(Phaser 6115MFP)" > > http://localhost:631/printers/ shows the following: > > Description: Xerox Phaser 6280DN > Location: (blank) > Printer Driver: Xerox Phaser 6115MFP Foomatic/foo2lava > Printer State: processing, accepting jobs, published. > Device URI: usb://Xerox/Phaser%206280DN > > The openprinting.org database says to use the foo2lava driver for a Xerox > Phaser 6115MFP. > > I couldn't find any way to send a file directly to the USB port. > Establishing a USB connection causes these devices to appear: > > usbdev5.8_ep00 > usbdev5.8_ep01 > usbdev5.8_ep82 > > and lsusb shows "Bus 005 Device 008: ID 0924:3d62 Xerox". But a test like > this: > > cat test.ps >/dev/usbdev5.8_ep00 > > returns "No such device or address". A few years ago, I could test a USB > printer by copying directly to /dev/usb/lp0. > > Finally, I will mention that I do not have a Windows PC handy to test the > new printer itself. I only have a VMware XP client. The driver installed > and displays fine, but when I send a print job it gives the blue screen of > death. I've had other problems with VMware Server 1 and USB devices. > > I'd appreciate any advice on how to get this working from Debian. Thanks. > > =========================================================================== > == > -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org