Signed-off-by: Stephen Finucane <step...@that.guru>
---
 INSTALL.Docker.rst |   2 +-
 INSTALL.RHEL.md    | 171 -------------------------------------------
 INSTALL.RHEL.rst   | 208 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 INSTALL.rst        |   2 +-
 Makefile.am        |   2 +-
 README.rst         |   2 +-
 6 files changed, 212 insertions(+), 175 deletions(-)
 delete mode 100644 INSTALL.RHEL.md
 create mode 100644 INSTALL.RHEL.rst

diff --git a/INSTALL.Docker.rst b/INSTALL.Docker.rst
index 35dcce2..236857a 100644
--- a/INSTALL.Docker.rst
+++ b/INSTALL.Docker.rst
@@ -290,7 +290,7 @@ The "underlay" mode
    Depending on your VM, you can make the above step persistent across reboots.
    For example, if your VM is Debian/Ubuntu-based, read
    `openvswitch-switch.README.Debian` found in `debian` folder. If your VM is
-   RHEL-based, refer to the `RHEL install guide <../../INSTALL.RHEL.md>`__.
+   RHEL-based, refer to the `RHEL install guide <../../INSTALL.RHEL.rst>`__.
 
 3. Start the Open vSwitch network driver
 
diff --git a/INSTALL.RHEL.md b/INSTALL.RHEL.md
deleted file mode 100644
index de33a46..0000000
--- a/INSTALL.RHEL.md
+++ /dev/null
@@ -1,171 +0,0 @@
-How to Install Open vSwitch on Red Hat Enterprise Linux
-=======================================================
-
-This document describes how to build and install Open vSwitch on a Red
-Hat Enterprise Linux (RHEL) host.  If you want to install Open vSwitch
-on a generic Linux host, see [INSTALL.rst] instead.
-
-We have tested these instructions with RHEL 5.6 and RHEL 6.0.
-
-For RHEL 7.x (or derivatives, such as CentOS 7.x), you should follow
-the instructions in [INSTALL.Fedora.rst].  The Fedora spec files are
-used for RHEL 7.x.
-
-Building Open vSwitch for RHEL
-------------------------------
-
-You may build from an Open vSwitch distribution tarball or from an
-Open vSwitch Git tree.
-
-The default RPM build directory (_topdir) has five directories in
-the top-level:
-1. BUILD/ Where the software is unpacked and built.
-2. RPMS/ Where the newly created binary package files are written.
-3. SOURCES/ Contains the original sources, patches, and icon files.
-4. SPECS/ Contains the spec files for each package to be built.
-5. SRPMS/ Where the newly created source package files are written.
-
-Before you begin, note the RPM sources directory on your version of
-RHEL.  The command "rpmbuild --showrc" will show the configuration
-for each of those directories. Alternatively, the command "rpm --eval
- '%{_topdir}'" shows the current configuration for the top level
-directory and the command "rpm --eval '%{_sourcedir}'" does the same
-for the sources directory. On RHEL 5, the default RPM _topdir is
-/usr/src/redhat and the default RPM sources directory is
-/usr/src/redhat/SOURCES. On RHEL 6, the default _topdir is
-$HOME/rpmbuild and the default RPM sources directory is
-$HOME/rpmbuild/SOURCES.
-
-1. Install build prerequisites:
-
-   ```
-   yum install gcc make python-devel openssl-devel kernel-devel graphviz \
-       kernel-debug-devel autoconf automake rpm-build redhat-rpm-config \
-       libtool
-   ```
-
-2. If you are building from a distribution tarball, skip to step 3.
-   Otherwise, you must be building from an Open vSwitch Git tree.
-   Determine what version of Autoconf is installed (e.g. run "autoconf
-   --version").  If it is not at least version 2.63, then you have two
-   choices:
-
-     a. Install Autoconf 2.63 or later, one way or another.
-
-     b. Create a distribution tarball on some other machine, by
-        running "./boot.sh; ./configure; make dist" in the Git tree.
-        You must run this on a machine that has the tools listed in
-        [INSTALL.rst] as prerequisites for building from a Git tree.
-        Afterward, proceed with the rest of the instructions using
-               the distribution tarball.
-
-3. Some versions of the RHEL 6 kernel-devel package contain a broken
-   "build" symlink.  If you are using such a version, you must fix
-   the problem before continuing.
-
-   To find out whether you are affected, run:
-
-       ```
-       cd /lib/modules/<version>
-       ls -l build/
-          ```
-
-   where `<version>` is the version number of the RHEL 6 kernel.  (The
-   trailing slash in the final command is important.  Be sure to include
-   it.)  If the "ls" command produces a directory listing, your
-   kernel-devel package is OK.  If it produces a "No such file or
-   directory" error, your kernel-devel package is buggy.
-
-   If your kernel-devel package is buggy, then you can fix it with:
-
-       ```
-       cd /lib/modules/<version>
-       rm build
-       ln -s /usr/src/kernels/<target> build
-          ```
-
-   where `<target>` is the name of an existing directory under
-   /usr/src/kernels, whose name should be similar to `<version>` but may
-   contain some extra parts.  Once you have done this, verify the fix with
-   the same procedure you used above to check for the problem.
-
-4. If you are building from a distribution tarball, skip to step 5.
-   Otherwise, create a distribution tarball from the root of the Git
-   tree by running:
-
-       ```
-       ./boot.sh
-       ./configure
-       make dist
-          ```
-
-5. Now you have a distribution tarball, named something like
-   openvswitch-x.y.z.tar.gz.  Copy this file into the RPM sources
-   directory, e.g.:
-
-       `cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES`
-
-6. Make another copy of the distribution tarball in a temporary
-   directory.  Then unpack the tarball and "cd" into its root, e.g.:
-
-       ```
-       tar xzf openvswitch-x.y.z.tar.gz
-       cd openvswitch-x.y.z
-          ```
-
-7. To build Open vSwitch userspace, run:
-
-       `rpmbuild -bb rhel/openvswitch.spec`
-
-   This produces two RPMs: "openvswitch" and "openvswitch-debuginfo".
-
-   The above command automatically runs the Open vSwitch unit tests.
-   To disable the unit tests, run:
-
-       `rpmbuild -bb --without check rhel/openvswitch.spec`
-
-   If the build fails with "configure: error: source dir
-   /lib/modules/2.6.32-279.el6.x86_64/build doesn't exist" or similar,
-   then the kernel-devel package is missing or buggy.  Go back to step
-   1 or 2 and fix the problem.
-
-8. On RHEL 6, to build the Open vSwitch kernel module, copy
-   rhel/openvswitch-kmod.files into the RPM sources directory and run:
-
-       `rpmbuild -bb rhel/openvswitch-kmod-rhel6.spec`
-
-   You might have to specify a kernel version and/or variants, e.g.:
-
-    ```
-       rpmbuild -bb \
-               -D "kversion 2.6.32-131.6.1.el6.x86_64" \
-               -D "kflavors default debug kdump" \
-               rhel/openvswitch-kmod-rhel6.spec
-       ```
-
-   This produces an "kmod-openvswitch" RPM for each kernel variant, in
-   this example: "kmod-openvswitch", "kmod-openvswitch-debug", and
-   "kmod-openvswitch-kdump".
-
-A RHEL host has default firewall rules that prevent any Open vSwitch tunnel
-traffic from passing through. If a user configures Open vSwitch tunnels like
-Geneve, GRE, VXLAN, LISP etc., they will either have to manually add iptables
-firewall rules to allow the tunnel traffic or add it through a startup script
-(Please refer to the "enable-protocol" command in the ovs-ctl(8) manpage).
-
-Red Hat Network Scripts Integration
------------------------------------
-
-Simple integration with Red Hat network scripts has been implemented.
-Please read [rhel/README.RHEL.rst] in the source tree or
-/usr/share/doc/openvswitch/README.RHEL.rst in the installed openvswitch
-package for details.
-
-Reporting Bugs
---------------
-
-Please report problems to b...@openvswitch.org.
-
-[INSTALL.rst]:INSTALL.rst
-[INSTALL.Fedora.rst]:INSTALL.Fedora.rst
-[rhel/README.RHEL.rst]:rhel/README.RHEL.rst
diff --git a/INSTALL.RHEL.rst b/INSTALL.RHEL.rst
new file mode 100644
index 0000000..125c55d
--- /dev/null
+++ b/INSTALL.RHEL.rst
@@ -0,0 +1,208 @@
+..
+      Licensed under the Apache License, Version 2.0 (the "License"); you may
+      not use this file except in compliance with the License. You may obtain
+      a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+      Unless required by applicable law or agreed to in writing, software
+      distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+      WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+      License for the specific language governing permissions and limitations
+      under the License.
+
+      Convention for heading levels in Open vSwitch documentation:
+
+      =======  Heading 0 (reserved for the title in a document)
+      -------  Heading 1
+      ~~~~~~~  Heading 2
+      +++++++  Heading 3
+      '''''''  Heading 4
+
+      Avoid deeper levels because they do not render well.
+
+========================================
+Open vSwitch on Red Hat Enterprise Linux
+========================================
+
+This document describes how to build and install Open vSwitch on a Red Hat
+Enterprise Linux (RHEL) host.  If you want to install Open vSwitch on a generic
+Linux host, see the `general installation guide <INSTALL.rst>`__ instead.
+
+We have tested these instructions with RHEL 5.6 and RHEL 6.0.
+
+For RHEL 7.x (or derivatives, such as CentOS 7.x), you should follow the
+instructions in the `Fedora installation guide <INSTALL.Fedora.rst>`__.  The
+Fedora spec files are used for RHEL 7.x.
+
+Prerequisites
+-------------
+
+You may build from an Open vSwitch distribution tarball or from an Open vSwitch
+Git tree.
+
+The default RPM build directory, ``_topdir``, has five directories in the
+top-level.
+
+BUILD/
+  where the software is unpacked and built
+RPMS/
+  where the newly created binary package files are written
+SOURCES/
+  contains the original sources, patches, and icon files
+SPECS/
+  contains the spec files for each package to be built
+SRPMS/
+  where the newly created source package files are written
+
+Before you begin, note the RPM sources directory on your version of RHEL.  The
+command ``rpmbuild --showrc`` will show the configuration for each of those
+directories. Alternatively, the command ``rpm --eval '%{_topdir}'`` shows the
+current configuration for the top level directory and the command ``rpm --eval
+'%{_sourcedir}'`` does the same for the sources directory. On RHEL 5, the
+default RPM ``_topdir`` is ``/usr/src/redhat`` and the default RPM sources
+directory is ``/usr/src/redhat/SOURCES``. On RHEL 6, the default ``_topdir`` is
+``$HOME/rpmbuild`` and the default RPM sources directory is
+``$HOME/rpmbuild/SOURCES``.
+
+Build Requirements
+------------------
+
+To compile the RPMs, you will need to install the packages described in the
+`general installation guide <INSTALL.rst>`__ along with some additional
+packages. These can be installed with the below command::
+
+    $ yum install gcc make python-devel openssl-devel kernel-devel graphviz \
+        kernel-debug-devel autoconf automake rpm-build redhat-rpm-config \
+        libtool
+
+Bootstrapping and Configuring
+-----------------------------
+
+If you are building from a distribution tarball, skip to *Building*. If not,
+you must be building from an Open vSwitch Git tree.  Determine what version of
+Autoconf is installed (e.g. run ``autoconf --version``).  If it is not at least
+version 2.63, then you must upgrade or use another machine to build the
+packages.
+
+Assuming all requirements have been met, build the tarball by running::
+
+    $ ./boot.sh
+    $ ./configure
+    $ make dist
+
+You must run this on a machine that has the tools listed in the `general
+installation guide <INSTALL.rst>`__ as prerequisites for building from a Git
+tree.  Afterward, proceed with the rest of the instructions using the
+distribution tarball.
+
+Now you have a distribution tarball, named something like
+``openvswitch-x.y.z.tar.gz``.  Copy this file into the RPM sources directory,
+e.g.::
+
+    $ cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES
+
+Broken ``build`` symlink
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Some versions of the RHEL 6 kernel-devel package contain a broken ``build``
+symlink.  If you are using such a version, you must fix the problem before
+continuing.
+
+To find out whether you are affected, run::
+
+    $ cd /lib/modules/<version>
+    $ ls -l build/
+
+where ``<version>`` is the version number of the RHEL 6 kernel.
+
+.. note::
+  The trailing slash in the final command is important.  Be sure to include
+  it.
+
+If the ``ls`` command produces a directory listing, your kernel-devel package
+is OK.  If it produces a ``No such file or directory`` error, your kernel-devel
+package is buggy.
+
+If your kernel-devel package is buggy, then you can fix it with::
+
+    $ cd /lib/modules/<version>
+    $ rm build
+    $ ln -s /usr/src/kernels/<target> build
+
+where ``<target>`` is the name of an existing directory under
+``/usr/src/kernels``, whose name should be similar to ``<version>`` but may
+contain some extra parts.  Once you have done this, verify the fix with the
+same procedure you used above to check for the problem.
+
+Building
+--------
+
+You should have a distribution tarball named something like
+openvswitch-x.y.z.tar.gz.  Copy this file into the RPM sources directory::
+
+    $ cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES
+
+Make another copy of the distribution tarball in a temporary directory.  Then
+unpack the tarball and ``cd`` into its root::
+
+    $ tar xzf openvswitch-x.y.z.tar.gz
+    $ cd openvswitch-x.y.z
+
+Userspace
+~~~~~~~~~
+
+To build Open vSwitch userspace, run::
+
+    $ rpmbuild -bb rhel/openvswitch.spec
+
+This produces two RPMs: "openvswitch" and "openvswitch-debuginfo".
+
+The above command automatically runs the Open vSwitch unit tests.  To disable
+the unit tests, run::
+
+    $ rpmbuild -bb --without check rhel/openvswitch.spec
+
+.. note::
+   If the build fails with ``configure: error: source dir
+   /lib/modules/2.6.32-279.el6.x86_64/build doesn't exist`` or similar, then
+   the kernel-devel package is missing or buggy.
+
+Kernel Module
+~~~~~~~~~~~~~
+
+On RHEL 6, to build the Open vSwitch kernel module, copy
+rhel/openvswitch-kmod.files into the RPM sources directory and run::
+
+    $ rpmbuild -bb rhel/openvswitch-kmod-rhel6.spec
+
+You might have to specify a kernel version and/or variants, e.g.:
+
+    $ rpmbuild -bb \
+        -D "kversion 2.6.32-131.6.1.el6.x86_64" \
+        -D "kflavors default debug kdump" \
+        rhel/openvswitch-kmod-rhel6.spec
+
+This produces an "kmod-openvswitch" RPM for each kernel variant, in this
+example: "kmod-openvswitch", "kmod-openvswitch-debug", and
+"kmod-openvswitch-kdump".
+
+Red Hat Network Scripts Integration
+-----------------------------------
+
+A RHEL host has default firewall rules that prevent any Open vSwitch tunnel
+traffic from passing through. If a user configures Open vSwitch tunnels like
+Geneve, GRE, VXLAN, LISP etc., they will either have to manually add iptables
+firewall rules to allow the tunnel traffic or add it through a startup script
+Refer to the "enable-protocol" command in the ovs-ctl(8) manpage for more
+information.
+
+In addition, simple integration with Red Hat network scripts has been
+implemented.  Refer to `README.RHEL.rst <rhel/README.RHEL.rst>`__ in the source
+tree or /usr/share/doc/openvswitch/README.RHEL.rst in the installed openvswitch
+package for details.
+
+Reporting Bugs
+--------------
+
+Report problems to b...@openvswitch.org.
diff --git a/INSTALL.rst b/INSTALL.rst
index 5c40ab9..2aafbde 100644
--- a/INSTALL.rst
+++ b/INSTALL.rst
@@ -31,7 +31,7 @@ platform, refer to one of these installation guides:
 
 - `Debian <INSTALL.Debian.rst>`__
 - `Fedora <INSTALL.Fedora.rst>`__
-- `RHEL <INSTALL.RHEL.md>`__
+- `RHEL <INSTALL.RHEL.rst>`__
 - `XenServer <INSTALL.XenServer.rst>`__
 - `NetBSD <INSTALL.NetBSD.rst>`__
 - `Windows <INSTALL.Windows.rst>`__
diff --git a/Makefile.am b/Makefile.am
index d032cb7..80ac7aa 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -80,7 +80,7 @@ docs = \
        INSTALL.KVM.rst \
        INSTALL.Libvirt.rst \
        INSTALL.NetBSD.rst \
-       INSTALL.RHEL.md \
+       INSTALL.RHEL.rst \
        INSTALL.SELinux.md \
        INSTALL.SSL.rst \
        INSTALL.XenServer.rst \
diff --git a/README.rst b/README.rst
index 979852b..ff8ad88 100644
--- a/README.rst
+++ b/README.rst
@@ -79,7 +79,7 @@ specific platform, please see one of the below installation 
guides:
 
 - `Debian <INSTALL.Debian.rst>`__
 - `Fedora <INSTALL.Fedora.rst>`__
-- `RHEL <INSTALL.RHEL.md>`__
+- `RHEL <INSTALL.RHEL.rst>`__
 - `XenServer <INSTALL.XenServer.rst>`__
 - `Windows <INSTALL.Windows.rst>`__
 
-- 
2.7.4

_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev

Reply via email to