Hi,
The smc_handle() in monitor.S, it does nothing but "movs pc, lr".
Does it set the NS bit to 1 in SCR?
Also, what did you do to ensure that 0x11000000 is not used by the kernel?
Could you share the code (if possible) so that I could better understand the
problem.
Regards,
Yanyan
________________________________
From: Devel <devel-bounces@sel4.systems> on behalf of 冀东旭
<jidongxu1...@gmail.com>
Sent: Tuesday, August 28, 2018 1:02 PM
To: devel@sel4.systems
Subject: [seL4] SMC in seL4
Hello,
I'm porting sel4 to imx6q sabrelite as the trusted OS in trustzone. I
initialize the monitor mode by setting the sp to STACK_TOP and copying
arm_monitor_vector to MON_VECTOR_START according to the functions
"install_monitor_hook()" and "switch_to_mon_mode()" in "platform_init.c".
#define VECTOR_BASE 0x11000000(addr is not used by the seL4 kernel)
#define STACK_TOP (VECTOR_BASE + (1 << 12) - 0x10)
#define MON_VECTOR_START 0x11000000(The VECTOR_BASE is the same as
MON_VECTOR_START)
The smc_handle() in monitor.S, it does nothing but "movs pc, lr". After
calling smc in SVC mode, it hangs without any log. If I comment the "smc #0",
it can return the caller successfully in usr mode.
stmfd sp!, {r3-r11, lr}
dsb
smc #0
ldmfd sp!, {r3-r11, pc}
Is the sp in monitor mode appropriate? Or I need to do something else in
initialization operations? What's wrong with it? Do you have any ideas?
Thank you!
Dongxu Ji
_______________________________________________
Devel mailing list
Devel@sel4.systems
https://sel4.systems/lists/listinfo/devel
