Hello Rein,
Thanks to ask only for the necessary (really implemented), as there are so
many possible RSID numbers (272).
For BPSK500 it will be 173.
Below is the new RS ID list with this new mode.
73
Patrick
IF NUMBER=1 THEN MODE:='BPSK31' ELSE
IF NUMBER=2 THEN MODE:='BPSK63' ELSE
IF NUMBER=3 THEN MODE:='QPSK63' ELSE
IF NUMBER=4 THEN MODE:='BPSK125' ELSE
IF NUMBER=5 THEN MODE:='QPSK125' ELSE
IF NUMBER=7 THEN MODE:='PSKFEC31' ELSE
IF NUMBER=8 THEN MODE:='PSK10' ELSE
{"MT63" parameter 1 parameter 2 (parameter 1: "500", "1000" (1000 Hz) or
"2000" (2000 Hz),
parameter 2: "LG" (Long), "ST" (Short) or "VST" (Very short)
Example: MT63-1000-LG}
IF NUMBER=9 THEN MODE:='MT63-500-LG' ELSE
IF NUMBER=10 THEN MODE:='MT63-500-ST' ELSE
IF NUMBER=11 THEN MODE:='MT63-500-VST' ELSE
IF NUMBER=12 THEN MODE:='MT63-1000-LG' ELSE
IF NUMBER=13 THEN MODE:='MT63-1000-ST' ELSE
IF NUMBER=14 THEN MODE:='MT63-1000-VST' ELSE
IF NUMBER=15 THEN MODE:='MT63-2000-LG' ELSE
IF NUMBER=17 THEN MODE:='MT63-2000-ST' ELSE
IF NUMBER=18 THEN MODE:='MT63-2000-VST' ELSE
IF NUMBER=19 THEN MODE:='PSKAM10' ELSE
IF NUMBER=20 THEN MODE:='PSKAM31' ELSE
IF NUMBER=21 THEN MODE:='PSKAM50' ELSE
IF NUMBER=22 THEN MODE:='PSK63F' ELSE
IF NUMBER=23 THEN MODE:='PSK220F' ELSE
{"CHIP 64" parameter 1 (parameter 1: "64" or "128"), Example: CHIP-64}
IF NUMBER=24 THEN MODE:='CHIP-64' ELSE
IF NUMBER=25 THEN MODE:='CHIP-128' ELSE
IF NUMBER=26 THEN MODE:='CW' ELSE
{"CCW" parameter 1 parameter 2 (parameter 1: "OOK" or "FSK",
parameter 2: "12" (12 wpm), "24" (24 wpm) or "48" (48 wpm)
Examples: CCW-OOK-12 or CCW-FSK-24}
IF NUMBER=27 THEN MODE:='CCW-OOK-12' ELSE
IF NUMBER=28 THEN MODE:='CCW-OOK-24' ELSE
IF NUMBER=29 THEN MODE:='CCW-OOK-48' ELSE
IF NUMBER=30 THEN MODE:='CCW-FSK-12' ELSE
IF NUMBER=31 THEN MODE:='CCW-FSK-24' ELSE
IF NUMBER=33 THEN MODE:='CCW-FSK-48' ELSE
{Pactor1 ARQ not RX/TX in Multipsk 4.1.1}
IF NUMBER=34 THEN MODE:='PACTOR1-FEC' ELSE
{"PACKET" parameter 1 (parameter 1: "300" (bauds) or "1200"
(bauds)),Example: PACKET-300}
IF NUMBER=35 THEN MODE:='PACKET-300' ELSE
IF NUMBER=36 THEN MODE:='PACKET-1200' ELSE
{"ASCII" parameter 1 (parameter 1: "7" (7 bits) or "8" (8 bits)), Example:
ASCII-7}
IF NUMBER=37 THEN MODE:='ASCII-7' ELSE
IF NUMBER=38 THEN MODE:='ASCII-8' ELSE
{"RTTY" parameter 1 (parameter 1: "45" (45 bauds), "50" (50 bauds), "75"
(75 bauds)), Example: RTTY-45}
IF NUMBER=39 THEN MODE:='RTTY-45' ELSE
IF NUMBER=40 THEN MODE:='RTTY-50' ELSE
IF NUMBER=41 THEN MODE:='RTTY-75' ELSE
IF NUMBER=42 THEN MODE:='AMTOR FEC' ELSE
{"THROB" parameter 1 (parameter 1: "1" (1 baud), "2" (2 bauds) or "4" (4
bauds)), Example: THROB-2}
IF NUMBER=43 THEN MODE:='THROB-1' ELSE
IF NUMBER=44 THEN MODE:='THROB-2' ELSE
IF NUMBER=45 THEN MODE:='THROB-4' ELSE
{"THROBX" parameter 1 (parameter 1: "1" (1 baud) or "2" (2 bauds)),
Example: THROBX-2}
IF NUMBER=46 THEN MODE:='THROBX-1' ELSE
IF NUMBER=47 THEN MODE:='THROBX-2' ELSE
{"CONTESTIA" parameter 1 parameter 2 (parameter 1: "4" (4 tones), "8" (8
tones), "16" (16 tones), "32" (32 tones), parameter 2: "250" (B=250 Hz),
"500" (B=500 Hz) or "1000" (B=1000 Hz))...same parameters as OLIVIA
Examples: CONTESTIA-32-1000 or CONTESTIA-8-500
Note: the following are the main Contestia modes:
CONTESTIA-4-250, CONTESTIA-4-500, CONTESTIA-8-250, CONTESTIA-8-500,
CONTESTIA-16-500, CONTESTIA-16-1000, CONTESTIA-32-1000}
IF NUMBER=49 THEN MODE:='CONTESTIA-8-250' ELSE
IF NUMBER=50 THEN MODE:='CONTESTIA-16-500' ELSE
IF NUMBER=51 THEN MODE:='CONTESTIA-32-1000' ELSE
IF NUMBER=52 THEN MODE:='CONTESTIA-8-500' ELSE
IF NUMBER=53 THEN MODE:='CONTESTIA-16-1000' ELSE
IF NUMBER=54 THEN MODE:='CONTESTIA-4-500' ELSE
IF NUMBER=55 THEN MODE:='CONTESTIA-4-250' ELSE
IF NUMBER=56 THEN MODE:='VOICE' ELSE
IF NUMBER=57 THEN MODE:='MFSK16' ELSE
IF NUMBER=60 THEN MODE:='MFSK8' ELSE
{"RTTYM" parameter 1 parameter 2 (parameter 1: "4" (4 tones), "8" (8
tones), "16" (16 tones), "32" (32 tones), parameter 2: "250" (B=250 Hz),
"500" (B=500 Hz) or "1000" (B=1000 Hz))...same parameters as OLIVIA
Examples: RTTYM-32-1000 or RTTYM-8-500
Note: the following are the main RTTYM modes: RTTYM-4-250, RTTYM-4-500,
RTTYM-8-250, RTTYM-8-500, RTTYM-16-500, RTTYM-16-1000, RTTYM-32-1000}
IF NUMBER=61 THEN MODE:='RTTYM-8-250' ELSE
IF NUMBER=62 THEN MODE:='RTTYM-16-500' ELSE
IF NUMBER=63 THEN MODE:='RTTYM-32-1000' ELSE
IF NUMBER=65 THEN MODE:='RTTYM-8-500' ELSE
IF NUMBER=66 THEN MODE:='RTTYM-16-1000' ELSE
IF NUMBER=67 THEN MODE:='RTTYM-4-500' ELSE
IF NUMBER=68 THEN MODE:='RTTYM-4-250' ELSE
{"OLIVIA" parameter 1 parameter 2 (parameter 1: "4" (4 tones), "8" (8
tones), "16" (16 tones), "32" (32 tones), parameter 2: "250" (B=250 Hz),
"500" (B=500 Hz) or "1000" (B=1000 Hz))
Examples: OLIVIA-32-1000 or OLIVIA-8-500
Note: the following are the main Olivia modes: OLIVIA-4-250, OLIVIA-4-500,
OLIVIA-8-250, OLIVIA-8-500, OLIVIA-16-500, OLIVIA-16-1000, OLIVIA-32-1000}
IF NUMBER=69 THEN MODE:='OLIVIA-8-250' ELSE
IF NUMBER=70 THEN MODE:='OLIVIA-16-500' ELSE
IF NUMBER=71 THEN MODE:='OLIVIA-32-1000' ELSE
IF NUMBER=72 THEN MODE:='OLIVIA-8-500' ELSE
IF NUMBER=73 THEN MODE:='OLIVIA-16-1000' ELSE
IF NUMBER=74 THEN MODE:='OLIVIA-4-500' ELSE
IF NUMBER=75 THEN MODE:='OLIVIA-4-250' ELSE
IF NUMBER=76 THEN MODE:='PAX' ELSE
IF NUMBER=77 THEN MODE:='PAX2' ELSE
IF NUMBER=78 THEN MODE:='DOMINOF' ELSE
IF NUMBER=79 THEN MODE:='FAX' ELSE
{the sub-modes SSTV are automatically recognized in SSTV so no parameters
are needed for SSTV}
IF NUMBER=81 THEN MODE:='SSTV' ELSE
{"DOMINOEX" parameter 1 and optionally parameter 2 (parameter 1: "4" (4
baud) , "5" (5 bauds),
"8" (8 bauds), "11" (11 bauds), "16" (16 bauds), "22" (22 bauds),
parameter 2 "" (no parameter 2 for non-FEC) or "FEC" (for FEC correction))
Example: DOMINOEX-11 or DOMINOEX-16-FEC (parameter 2 is optional)}
IF NUMBER=84 THEN MODE:='DOMINOEX-4' ELSE
IF NUMBER=85 THEN MODE:='DOMINOEX-5' ELSE
IF NUMBER=86 THEN MODE:='DOMINOEX-8' ELSE
IF NUMBER=87 THEN MODE:='DOMINOEX-11' ELSE
IF NUMBER=88 THEN MODE:='DOMINOEX-16' ELSE
IF NUMBER=90 THEN MODE:='DOMINOEX-22' ELSE
IF NUMBER=92 THEN MODE:='DOMINOEX-4-FEC' ELSE
IF NUMBER=93 THEN MODE:='DOMINOEX-5-FEC' ELSE
IF NUMBER=97 THEN MODE:='DOMINOEX-8-FEC' ELSE
IF NUMBER=98 THEN MODE:='DOMINOEX-11-FEC' ELSE
IF NUMBER=99 THEN MODE:='DOMINOEX-16-FEC' ELSE
IF NUMBER=101 THEN MODE:='DOMINOEX-22-FEC' ELSE
IF NUMBER=104 THEN MODE:='FELD HELL' ELSE
IF NUMBER=105 THEN MODE:='PSK HELL' ELSE
IF NUMBER=106 THEN MODE:='HELL 80' ELSE
{"FMHELL" parameter 1 (parameter 1: "105" (105 bauds) or "245" (245
bauds)),
Example: FMHELL-245}
IF NUMBER=107 THEN MODE:='FM HELL-105' ELSE
IF NUMBER=108 THEN MODE:='FM HELL-245' ELSE
IF NUMBER=110 THEN MODE:='QPSK31' ELSE
{"PACKET" parameter 1 (parameter 1: "110" (bauds),Example: PACKET-110}
IF NUMBER=113 THEN MODE:='PACKET-110' ELSE
IF NUMBER=114 THEN MODE:='141A' ELSE
IF NUMBER=116 THEN MODE:='OLIVIA-8-1000' ELSE
IF NUMBER=117 THEN MODE:='CONTESTIA-8-1000' ELSE
IF NUMBER=119 THEN MODE:='RTTYM-8-1000' ELSE
IF NUMBER=123 THEN MODE:='DTMF' ELSE
IF NUMBER=125 THEN MODE:='ALE400' ELSE
IF NUMBER=126 THEN MODE:='BPSK250' ELSE
IF NUMBER=127 THEN MODE:='QPSK250' ELSE
IF NUMBER=131 THEN MODE:='FDMDV' ELSE
IF NUMBER=132 THEN MODE:='JT65-A' ELSE
IF NUMBER=134 THEN MODE:='JT65-B' ELSE
IF NUMBER=135 THEN MODE:='JT65-C' ELSE
IF NUMBER=136 THEN MODE:='THOR-4' ELSE
IF NUMBER=137 THEN MODE:='THOR-8' ELSE
IF NUMBER=138 THEN MODE:='THOR-16' ELSE
IF NUMBER=139 THEN MODE:='THOR-5' ELSE
IF NUMBER=143 THEN MODE:='THOR-11' ELSE
IF NUMBER=145 THEN MODE:='THOR-22' ELSE
IF NUMBER=146 THEN MODE:='THROBX-4' ELSE
IF NUMBER=147 THEN MODE:='MFSK32' ELSE
IF NUMBER=148 THEN MODE:='MFSK11' ELSE
IF NUMBER=152 THEN MODE:='MFSK22' ELSE
IF NUMBER=153 THEN MODE:='CALL ID' ELSE
{"PACKET" parameter 1 (parameter 1: "PSKbauds")}
IF NUMBER=155 THEN MODE:='PACKET-PSK1200' ELSE
IF NUMBER=156 THEN MODE:='PACKET-PSK250' ELSE
IF NUMBER=159 THEN MODE:='PACKET-PSK63' ELSE
IF NUMBER=163 THEN MODE:='OLIVIA-8-125' ELSE
IF NUMBER=169 THEN MODE:='CONTESTIA-8-125' ELSE
IF NUMBER=170 THEN MODE:='RTTYM-8-125' ELSE
{MIL-STD-188-110A in asynchronous format 8N1 (8 data bits, no parity, 1
stop bit)}
IF NUMBER=172 THEN MODE:='110A-8N1' ELSE
IF NUMBER=173 THEN MODE:='BPSK500';
----- Original Message -----
From: "Rein Couperus" <r...@couperus.com>
To: <f6...@free.fr>
Cc: <w1...@w1hkj.com>
Sent: Saturday, October 24, 2009 8:44 AM
Subject: Re: [digitalradio] RSID numbers
Tnx Patrick,
for the moment we only need a number for PSK500, which seems to work well,
For the other modes I am not yet sure if they will be implemented in the
end,
So only BPSK500 for the moment...
73,
Rein Pa0R
> -----Ursprüngliche Nachricht-----
> Von: "Patrick Lindecker" <f6...@free.fr>
> Gesendet: 23.10.09 23:05:12
> An: <digitalradio@yahoogroups.com>
> Betreff: Re: [digitalradio] RSID numbers
> Hello Jose,
>
> Yes you are right. To put all the variants, it would be needed many more
> bits, perhaps as many bits as for the Call ID (56).
> Yes it would need a specific protocol and, necessarily, would need a more
> complicated updating.
>
> The present RS ID is limited to the main modes and it is finally rather
> simple, so...
>
> 73
> Patrick
>
>
> ----- Original Message -----
> From: "Jose A. Amador" <ama...@electrica.cujae.edu.cu>
> To: <digitalradio@yahoogroups.com>
> Sent: Friday, October 23, 2009 2:57 PM
> Subject: Re: [digitalradio] RSID numbers
>
>
>
> I have not used MixW in a long time and my memories might be a bit
> innacurate, but in MixW you set the basic modulation and choose the
> arguments in a
> cascading menu. Say, you choose RTTY, and in the modem configuration you
> choose shift and speed. On PSK you may choose the signalling speed, and
> so on.I believe Same with Olivia, choosing BW and tones. I believe
> FLdigi is equally capable of doing so, but I have used it ocassionally
> as it is distributed,
> "off the box".
>
> I am afraid that "to cover all bases" you must use a modulation code
> with additional arguments, as a limited nunbers pool may not be able to
> describe all variants.
>
> It has a cost, a longer RSID which is likely to be not welcome. A
> solution I would like is not mess with what works and assign a longer
> code for rarer, not yet
> described modes.Of course, it would require a new RSID protocol version.
>
> Just a suggestion.
>
> 73
>
> Jose, CO2JA
>
> ---
>
> Rein Couperus escribió:
> > I have the patches for fldigi ready, only waiting forthe numbers...
> >
> > 73,
> >
> > Rein PA0R
> >
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: "Patrick Lindecker" <f6...@free.fr>
> >> Gesendet: 22.10.09 20:16:40
> >> An: <digitalradio@yahoogroups.com>
> >> Betreff: Re: [digitalradio] RSID numbers
> >>
> >
> >
> >
> >> Hello Rein,
> >>
> >>
> >>> BPSK500, BPSK1000, QPSK500 and QPSK1000?
> >>>
> >> Are these modes on Fldigi or DM780? If so, there were no demand for
> >> these
> >> modes, so no RS ID numbers given. It can't be given RS ID numbers if
> >> the
> >> modes don't exist in any of the softs able to decode RS ID.
> >>
> >> 73
> >> Patrick
> >>
> >> ----- Original Message -----
> >> From: "Rein Couperus" <r...@couperus.com>
> >> To: <digitalradio@yahoogroups.com>
> >> Cc: <linux-...@yahoogroups.com>
> >> Sent: Thursday, October 22, 2009 5:31 PM
> >> Subject: [digitalradio] RSID numbers
> >>
> >>
> >>
> >>> What are the RSID numbers for BPSK500, BPSK1000, QPSK500 and QPSK1000?
> >>> Does anybody know?
> >>>
> >>> 73,
> >>>
> >>> Rein PA0R
> >>>
> >>> --
> >>> http://pa0r.blogspirit.com
> >>>
> >>>
>
>
>
>
> Participe en Universidad 2010, del 8 al 12 de febrero de 2010
> La Habana, Cuba
> http://www.universidad2010.cu
>
>
> ---------------------------------------------------------------------
>
> SEGUNDO SEMINARIO INTERNACIONAL LEGADO Y DIVERSIDAD. ARQUITECTURA Y
> URBANISMO.
>
> El rescate de los valores urbanos y arquitectónicos en tiempos de
> globalización
>
> Colegio de San Gerónimo, La Habana Vieja, noviembre 24-27, 2009
>
> ---------------------------------------------------------------------
>
>
> ------------------------------------
>
> Announce your digital presence via our Interactive Sked Pages at
> http://www.obriensweb.com/sked
>
> Recommended digital mode software: Winwarbler, FLDIGI, DM780, or Multipsk
> Logging Software: DXKeeper or Ham Radio Deluxe.
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ------------------------------------
>
> Announce your digital presence via our Interactive Sked Pages at
> http://www.obriensweb.com/sked
>
> Recommended digital mode software: Winwarbler, FLDIGI, DM780, or Multipsk
> Logging Software: DXKeeper or Ham Radio Deluxe.
>
>
>
> Yahoo! Groups Links
>
>
>
>
--
http://pa0r.blogspirit.com
------------------------------------
Announce your digital presence via our Interactive Sked Pages at
http://www.obriensweb.com/sked
Recommended digital mode software: Winwarbler, FLDIGI, DM780, or Multipsk
Logging Software: DXKeeper or Ham Radio Deluxe.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/digitalradio/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/digitalradio/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:digitalradio-dig...@yahoogroups.com
mailto:digitalradio-fullfeatu...@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
digitalradio-unsubscr...@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
