Hello Steinar,

I left my transceiver on duty and that is what I got (QTH near Paris).  I 
used Multipsk without KVASD (to avoid false detections) so the minimum S/N 
was -24 dB (hard decision)  instead of -26 dB (soft decision).
Your signal was very weak (-20 to -25 dB) but still decodable in JT65.

73
Patrick


Here it is:
12:20 4 -22 3 -0018 LA5VNA/B

12:22 9 -20 3 -0018 LA5VNA/B

12:44 4 -22 4 -0015 LA5VNA/B

12:46 5 -23 4 -0015 LA5VNA/B

13:16 5 -24 1 -0012 LA5VNA/B

13:34 3 -23 3 -0012 LA5VNA/B

13:36 5 -21 3 -0012 LA5VNA/B

13:40 4 -22 3 -0012 LA5VNA/B

13:48 1 -23 3 -0012 LA5VNA/B

13:50 6 -22 3 -0012 LA5VNA/B

13:52 5 -23 3 -0012 LA5VNA/B

13:54 3 -24 3 -0012 LA5VNA/B

13:58 5 -22 3 -0012 LA5VNA/B

14:02 6 -21 4 -0012 LA5VNA/B

14:04 3 -23 4 -0012 LA5VNA/B

14:06 4 -23 4 -0012 LA5VNA/B

14:08 9 -23 4 -0012 LA5VNA/B

14:10 6 -23 4 -0012 LA5VNA/B

14:12 6 -21 4 -0012 LA5VNA/B

14:14 6 -20 4 -0012 LA5VNA/B

14:16 6 -20 4 -0012 LA5VNA/B

14:18 8 -19 5 -0012 LA5VNA/B

14:20 3 -24 4 -0010 LA5VNA/B

14:22 7 -23 5 -0012 LA5VNA/B

14:24 5 -24 5 -0012 LA5VNA/B

14:26 7 -23 5 -0012 LA5VNA/B

14:30 4 -22 5 -0010 LA5VNA/B

14:32 9 -22 5 -0010 LA5VNA/B

14:38 4 -24 5 -0012 LA5VNA/B

14:40 4 -25 5 -0012 LA5VNA/B

14:42 3 -22 5 -0010 LA5VNA/B

14:44 3 -21 6 -0012 LA5VNA/B

14:54 5 -22 6 -0012 LA5VNA/B

14:56 7 -24 6 -0011 LA5VNA/B

14:58 3 -22 6 -0010 LA5VNA/B

15:00 3 -20 6 -0010 LA5VNA/B

15:02 4 -24 6 -0011 LA5VNA/B

15:08 5 -24 6 -0011 LA5VNA/B

15:10 3 -22 6 -0010 LA5VNA/B

15:14 5 -23 6 -0010 LA5VNA/B

15:16 4 -23 7 -0010 LA5VNA/B

15:26 6 -21 7 -0010 LA5VNA/B

15:28 4 -26 7 -0010 LA5VNA/B

15:30 7 -22 7 -0010 LA5VNA/B

15:34 4 -23 8 -0010 LA5VNA/B

15:36 10 -20 8 -0010 LA5VNA/B

15:38 7 -25 8 -0010 LA5VNA/B

15:40 9 -22 8 -0010 LA5VNA/B

15:46 5 -20 8 -0010 LA5VNA/B

15:48 5 -20 9 -0010 LA5VNA/B

15:50 4 -20 9 -0010 LA5VNA/B



----- Original Message ----- 
From: "Dave Ackrill" <dave.g0...@tiscali.co.uk>
To: <digitalradio@yahoogroups.com>
Sent: Sunday, November 15, 2009 5:15 PM
Subject: Re: [digitalradio] JT65A Beacon on 60m


> Steinar Aanesland wrote:
>> Hi all
>>
>> I am running a 5W JT65A beacon at 5350 Khz + 1270Hz USB  this evening.
>
> I'm a bit confused on the frequency being used Steinar,
>
> Can you confirm 5350kHz plus 1.270kHz please?
>
> The only information on the Norwegian frequencies on 60M that I can find
> is as follows.
>
> Center Frequency USB Dial Frequency
> 5280 kHz         5278.5 kHz
> 5290 kHz         5288.5 kHz
> 5332 kHz         5330.5 kHz
> 5348 kHz         5346.5 kHz
> 5368 kHz         5366.5 kHz
> 5373 kHz         5371.5 kHz
> 5400 kHz         5398.5 kHz
> 5405 kHz         5403.5 kHz
>
> all with a 3kHz bandwidth.
>
> 5350 plus 1270 gives 5351.27kHz, of course, but that doesn't appear to
> fit into any of the 3kHz sections.  The nearest appears to be 5348kHz,
> but that 'channel' ends at 5349.5kHz.
>
> I guess you have an experimental licence, like the ones issued in
> Germany for 70MHz, where you have a specific spot frequency allocated to
> you?
>
> I'll set my dial frequency a little below 5350kHz and will see if I can
> see any signals.
>
> Regards - Dave (G0DJA)
>
>
> ------------------------------------
>
> Suggested frequencies for calling CQ with experimental digital modes =
> 3584,10147, 14074 USB on your dial plus 1000Hz on waterfall.
>
> Announce your digital presence via our Interactive Sked Pages at
> http://www.obriensweb.com/sked
> Yahoo! Groups Links
>
>
>
>
> 

Reply via email to