Hello Andy, > It is really Commander that performs the band changes , then Multipsk with > the decode. However, there is a possibility to scan directly 4 frequencies from Multipsk (in the "Transceiver" window) using of course Commander.
> So far, these two days of band scanning have only captured PSK31 signals > via the Panoramic feature. It has not captured any >RSIDs. I am not sure > if that is because there were NO RSIDs transmitted on the frequencies I > was scanning, or if the RS-ID >decode does not work in Multipsk when > Panoroamic is enabled. I will do some more testing tomorrow as I check > the If the Panoramic is started, the (SdR) RS ID does not work. I must see this point... 73 Patrick ----- Original Message ----- From: "obrienaj" <k3uka...@gmail.com> To: <digitalradio@yahoogroups.com> Sent: Friday, March 19, 2010 2:36 AM Subject: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander > > --- In digitalradio@yahoogroups.com, "Francesco Piccone" <fpicc...@...> > wrote: >> >> Dear Andy and puts on MultiPSK to perform this function ? >> 73 >> tnx >> Frank >> yv4gjn > > > Frank, > > It is really Commander that performs the band changes , then Multipsk with > the decode. > > 1. Set Commander to scan specific frequencies (see "config" in Commander" > 2. Set 'dwell" time in Commander to suit your needs (I used 120 seconds) > 3. Launch Multipsk, press Commander button ,at bottom of Multipsk screen > ,to link Commander and Multipsk for frequency information. > 4. in Multipsk, activate PSK reporter DLL > 5. In Multipsk, if interested in PSK data, choose PSK31 as the mode and > then press "Panoromic" > > 6. When ready to look at the signals decoded and captured, examine the PSK > reporter window in MultiPSK, you will see things like.. > 22:26 PJ2MI PSK31 18101701 > 21:54 G3WXC PSK31 10140894 > 21:54 PA0DY PSK31 10141361 > 21:49 N7UF PSK31 18102092 > > So far, these two days of band scanning have only captured PSK31 signals > via the Panoramic feature. It has not captured any RSIDs. I am not sure > if that is because there were NO RSIDs transmitted on the frequencies I > was scanning, or if the RS-ID decode does not work in Multipsk when > Panoroamic is enabled. I will do some more testing tomorrow as I check > the frequencies suggested by Rein. > > Andy K3UK > > > > ------------------------------------ > > http://www.obriensweb.com/digispotter.html > Chat, Skeds, and "spots" all in one (resize to suit)Yahoo! Groups Links > > > >
