Thanks, I will disconnect the mic and see how that goes. Using the Digikeyer with it here.
On Fri, Sep 3, 2010 at 7:37 PM, aa777888athotmaildotcom < aa777...@hotmail.com> wrote: > > > Andy, > > I have one. I also use a similar Microham interface, the USB III. There is > absolutely nothing special about setting it up. Put it in USB mode and go. > However the Microham products rely on the ACC connector and the downside to > this is that when the radio is keyed via that connector the microphone input > is live. I have complained to them about that to no avail. Disconnect the > microphone to eliminate any background noise from the shack. > > 73 > > Scott > > > --- In digitalradio@yahoogroups.com <digitalradio%40yahoogroups.com>, Andy > obrien <k3uka...@...> wrote: > > > > A friend dropped off his IC-7000, Digikeyer, and notebook for me to > > configure for digital modes. I have the various digital modes > > software configured but when I xmit and monitor on the other radio in > > the shack, the tones sound very odd and the receiving waterfall shows > > 3Khz wide signal rather than a narrow PSK31 signal. The manual does > > not have a section for setting up on the digital modes. Can someone > > save me on the learning curve and tell me how the IC-7000 is set for > > digital mode transmissions ? > > > > Any K3UK > > > > >
