Hi Jean Marie - 2 thoughts:
1) Did you run "sudo ldconfig" after installation? Always a good idea to do
that after installing anything, to update to LD cache.
2) If you run
{{{
/usr/bin/python2 -c "import sys; print(sys.path)"
}}}
is one of the paths "/usr/local/lib/python2.7/dist-packages"? If not, then
you need to add that path to the shell environment PYTHONPATH variable, and
add it to one of the shell login command scripts. For example if you use
BASH, then you could add the following to ~/.bashrc:
{{{
export PYTHONPATH=/usr/local/lib/python2.7/dist-packages:$PYTHONPATH
}}}
so that when you login this path is automatically available. You can, of
course, set it in your current terminal to test / verify that doing so
fixes the issue.
Hope this is useful! - MLD
On Wed, Feb 12, 2020 at 8:43 AM Jean Marie Brieussel <f6...@wanadoo.fr>
wrote:
> Hi,
>
> I installed UHD V3.15.0.0 and GNURadio V3.7.13.4 the loaded FPGA image is
> the XG. I checked the correct functioning of UHD and GNURadio as well as
> the USRP N300 with UHD, the tests are correct. I checked that the N300 is
> seen by the host PC, see the result below:
>
> jmf6etu@JM-F6ETU:~$ uhd_find_devices
> [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
> UHD_3.15.0.HEAD-0-gaea0e2de
> --------------------------------------------------
> -- UHD Device 0
> --------------------------------------------------
> Device Address:
> serial: 31C037E
> addr: 192.168.20.2
> claimed: False
> mgmt_addr: 192.168.10.2
> mgmt_addr: 192.168.20.2
> product: n300
> type: n3xx
> I did the small classic test program under GRC, see the attached
> screenshot, (I hope that the attached files are visible on this discussion
> list).
>
> In copy if below the Terminal information lines:
>
> jmf6etu@JM-F6ETU:~$ gnuradio-companion
> Gtk-Message: 14:15:09.794: Failed to load module "canberra-gtk-module"
> <<< Welcome to GNU Radio Companion 3.7.13.4 >>>
>
> Block paths:
> /usr/local/share/gnuradio/grc/blocks
>
> Loading: "/home/jmf6etu/Bureau/Appli_GNU/FM_exemplegrc.grc"
> >>> Done
>
> Loading: "/home/jmf6etu/Bureau/Appli_GNU/gene.grc"
> >>> Done
>
> Generating: '/home/jmf6etu/Bureau/Appli_GNU/fm_exemple.py'
>
> Executing: /usr/bin/python2 -u
> /home/jmf6etu/Bureau/Appli_GNU/fm_exemple.py
>
> Traceback (most recent call last):
> File "/home/jmf6etu/Bureau/Appli_GNU/fm_exemple.py", line 25, in
> <module>
> from gnuradio import uhd
> File "*/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/*__init__.py",
> line 135, in <module>
> _prepare_uhd_swig()
> File "*/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/*__init__.py",
> line 38, in _prepare_uhd_swig
> import uhd_swig
> File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
> line 17, in <module>
> _uhd_swig = swig_import_helper()
> File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
> line 16, in swig_import_helper
> return importlib.import_module('_uhd_swig')
> File "*/usr/lib/python2.7/importlib/*__init__.py", line 37, in
> import_module
> __import__(name)
> ImportError: No module named _uhd_swig
>
> >>> Done (return code 1)
> Advice to solve my problems is welcome.
>
> Best Regards,
>
> Jean Marie
>
--
Michael Dickens
Ettus Research Technical Support
Email: supp...@ettus.com
Web: https://ettus.com/
