On Mon, Feb 24, 2020 at 10:06:05AM +0100, Maxime Ripard wrote: > The HDMI blocks in the BCM2771 have an i2c controller to retrieve the > EDID. This block is split into two parts, the BSC and the AUTO_I2C, > lying in two separate register areas. > > The AUTO_I2C block has a mailbox-like interface and will take away the > BSC control from the CPU if enabled. However, the BSC is the actually > the same controller than the one supported by the brcmstb driver, and > the AUTO_I2C doesn't really bring any immediate benefit. > > Let's use the BSC then, but let's also tie the AUTO_I2C registers with a > separate compatible so that we can enable AUTO_I2C if needed in the > future. > > The AUTO_I2C is enabled by default at boot though, so we first need to > release the BSC from the AUTO_I2C control. > > Cc: Kamal Dasu <kdasu.k...@gmail.com> > Cc: Florian Fainelli <f.faine...@gmail.com> > Cc: Wolfram Sang <w...@the-dreams.de> > Cc: bcm-kernel-feedback-l...@broadcom.com > Cc: linux-...@vger.kernel.org > Signed-off-by: Maxime Ripard <max...@cerno.tech>
Fixed the acked-by and applied to for-next, thanks!
FYI, cppcheck rightfully warned about this in the driver:
drivers/i2c/busses/i2c-brcmstb.c:319:7: warning: Condition 'CMD_RD' is always
true [knownConditionTrueFalse]
if ((CMD_RD || CMD_WR) &&
^
drivers/i2c/busses/i2c-brcmstb.c:319:17: warning: Condition 'CMD_WR' is always
false [knownConditionTrueFalse]
if ((CMD_RD || CMD_WR) &&
^
drivers/i2c/busses/i2c-brcmstb.c:464:0: warning: Variable 'len' is assigned a
value that is never used. [unreadVariable]
int len = 0;
Not related to this patch, but maybe one of you is interested...
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
