Through a cooperative effort between Hsin-Yi Wang and Dmitry
Baryshkov, we have realized the dev_err() in the
mipi_dsi_*_write_seq() macros was causing quite a bit of bloat to the
kernel. Let's hoist this call into drm_mipi_dsi.c by adding a "chatty"
version of the functions that includes the print. While doing this,
add a bit more comments to these macros making it clear that they
print errors and also that they return out of _the caller's_ function.

Without any changes to clients this gives a nice savings. Specifically
the macro was inlined and thus the error report call was inlined into
every call to mipi_dsi_dcs_write_seq() and
mipi_dsi_generic_write_seq(). By using a call to a "chatty" function,
the usage is reduced to one call in the chatty function and a function
call at the invoking site.

Building with my build system shows one example:

$ scripts/bloat-o-meter \
  .../before/panel-novatek-nt36672e.ko \
  .../after/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-4404 (-4404)
Function                                     old     new   delta
nt36672e_1080x2408_60hz_init               10640    6236   -4404
Total: Before=15055, After=10651, chg -29.25%

Note that given the change in location of the print it's harder to
include the "cmd" in the printout for mipi_dsi_dcs_write_seq() since,
theoretically, someone could call the new chatty function with a
zero-size array and it would be illegal to dereference data[0].
There's a printk format to print the whole buffer and this is probably
more useful for debugging anyway. Given that we're doing this for
mipi_dsi_dcs_write_seq(), let's also print the buffer for
mipi_dsi_generic_write_seq() in the error case.

It should be noted that the current consensus of DRM folks is that the
mipi_dsi_*_write_seq() should be deprecated due to the non-intuitive
return behavior. A future patch will formally mark them as deprecated
and provide an alternative.

Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
Reviewed-by: Linus Walleij <linus.wall...@linaro.org>
Signed-off-by: Douglas Anderson <diand...@chromium.org>
---

Changes in v4:
- Update wording as per Linus W.

Changes in v3:
- Rebased upon patch to remove ratelimit of prints.

Changes in v2:
- Add some comments to the macros about printing and returning.
- Change the way err value is handled in prep for next patch.
- Modify commit message now that this is part of a series.
- Rebased upon patches to avoid theoretical int overflow.

 drivers/gpu/drm/drm_mipi_dsi.c | 56 ++++++++++++++++++++++++++++++++++
 include/drm/drm_mipi_dsi.h     | 47 +++++++++++++++-------------
 2 files changed, 82 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index 795001bb7ff1..8593d9ed5891 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -764,6 +764,34 @@ ssize_t mipi_dsi_generic_write(struct mipi_dsi_device 
*dsi, const void *payload,
 }
 EXPORT_SYMBOL(mipi_dsi_generic_write);
 
+/**
+ * mipi_dsi_generic_write_chatty() - mipi_dsi_generic_write() w/ an error log
+ * @dsi: DSI peripheral device
+ * @payload: buffer containing the payload
+ * @size: size of payload buffer
+ *
+ * Like mipi_dsi_generic_write() but includes a dev_err_ratelimited()
+ * call for you and returns 0 upon success, not the number of bytes sent.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_generic_write_chatty(struct mipi_dsi_device *dsi,
+                                 const void *payload, size_t size)
+{
+       struct device *dev = &dsi->dev;
+       ssize_t ret;
+
+       ret = mipi_dsi_generic_write(dsi, payload, size);
+       if (ret < 0) {
+               dev_err(dev, "sending generic data %*ph failed: %zd\n",
+                       (int)size, payload, ret);
+               return ret;
+       }
+
+       return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_generic_write_chatty);
+
 /**
  * mipi_dsi_generic_read() - receive data using a generic read packet
  * @dsi: DSI peripheral device
@@ -852,6 +880,34 @@ ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device 
*dsi,
 }
 EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
 
+/**
+ * mipi_dsi_dcs_write_buffer_chatty - mipi_dsi_dcs_write_buffer() w/ an error 
log
+ * @dsi: DSI peripheral device
+ * @data: buffer containing data to be transmitted
+ * @len: size of transmission buffer
+ *
+ * Like mipi_dsi_dcs_write_buffer() but includes a dev_err_ratelimited()
+ * call for you and returns 0 upon success, not the number of bytes sent.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_write_buffer_chatty(struct mipi_dsi_device *dsi,
+                                    const void *data, size_t len)
+{
+       struct device *dev = &dsi->dev;
+       ssize_t ret;
+
+       ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
+       if (ret < 0) {
+               dev_err(dev, "sending dcs data %*ph failed: %zd\n",
+                       (int)len, data, ret);
+               return ret;
+       }
+
+       return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer_chatty);
+
 /**
  * mipi_dsi_dcs_write() - send DCS write command
  * @dsi: DSI peripheral device
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 67967be48dbd..6d68d9927f46 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -256,6 +256,8 @@ int mipi_dsi_picture_parameter_set(struct mipi_dsi_device 
*dsi,
 
 ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void 
*payload,
                               size_t size);
+int mipi_dsi_generic_write_chatty(struct mipi_dsi_device *dsi,
+                                 const void *payload, size_t size);
 ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
                              size_t num_params, void *data, size_t size);
 
@@ -279,6 +281,8 @@ enum mipi_dsi_dcs_tear_mode {
 
 ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
                                  const void *data, size_t len);
+int mipi_dsi_dcs_write_buffer_chatty(struct mipi_dsi_device *dsi,
+                                    const void *data, size_t len);
 ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
                           const void *data, size_t len);
 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
@@ -311,38 +315,39 @@ int mipi_dsi_dcs_get_display_brightness_large(struct 
mipi_dsi_device *dsi,
 
 /**
  * mipi_dsi_generic_write_seq - transmit data using a generic write packet
+ *
+ * This macro will print errors for you and will RETURN FROM THE CALLING
+ * FUNCTION (yes this is non-intuitive) upon error.
+ *
  * @dsi: DSI peripheral device
  * @seq: buffer containing the payload
  */
-#define mipi_dsi_generic_write_seq(dsi, seq...)                           \
-       do {                                                              \
-               static const u8 d[] = { seq };                            \
-               struct device *dev = &dsi->dev;                           \
-               ssize_t ret;                                              \
-               ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d));      \
-               if (ret < 0) {                                            \
-                       dev_err(dev, "transmit data failed: %zd\n", ret); \
-                       return ret;                                       \
-               }                                                         \
+#define mipi_dsi_generic_write_seq(dsi, seq...)                                
\
+       do {                                                                   \
+               static const u8 d[] = { seq };                                 \
+               int ret;                                                       \
+               ret = mipi_dsi_generic_write_chatty(dsi, d, ARRAY_SIZE(d));    \
+               if (ret < 0)                                                   \
+                       return ret;                                            \
        } while (0)
 
 /**
  * mipi_dsi_dcs_write_seq - transmit a DCS command with payload
+ *
+ * This macro will print errors for you and will RETURN FROM THE CALLING
+ * FUNCTION (yes this is non-intuitive) upon error.
+ *
  * @dsi: DSI peripheral device
  * @cmd: Command
  * @seq: buffer containing data to be transmitted
  */
-#define mipi_dsi_dcs_write_seq(dsi, cmd, seq...)                            \
-       do {                                                                \
-               static const u8 d[] = { cmd, seq };                         \
-               struct device *dev = &dsi->dev;                             \
-               ssize_t ret;                                                \
-               ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));     \
-               if (ret < 0) {                                              \
-                       dev_err(dev, "sending command %#02x failed: %zd\n", \
-                               cmd, ret);                                  \
-                       return ret;                                         \
-               }                                                           \
+#define mipi_dsi_dcs_write_seq(dsi, cmd, seq...)                               
\
+       do {                                                                   \
+               static const u8 d[] = { cmd, seq };                            \
+               int ret;                                                       \
+               ret = mipi_dsi_dcs_write_buffer_chatty(dsi, d, ARRAY_SIZE(d)); \
+               if (ret < 0)                                                   \
+                       return ret;                                            \
        } while (0)
 
 /**
-- 
2.45.0.rc1.225.g2a3ae87e7f-goog

Reply via email to