That should work in 2011.54 Cheers, Matt
On Tue, Jan 10, 2012 at 04:51:25PM +0530, Chandan Tiwari wrote: > Hi.... > > > > I've installed dropbear 0.53.1 on my linux machine and I tried to > request for remote port forwarding by assigning the port to listen as 0 > using the command : > > dbclient -R 0:<ip address>:22 user@<ip address> but it gave the error > message that it is unable to start port forwarding at port no 0 , I also > looked in the source code of Dropbear from which I found that it is not > supported with dropbear but in RFC 4254,section 7, page 16 it is > mentioned that if we assign 0 as port no then the ssh server should > assign the next available port to the client. > > Please tell me that whether it is mandatory to support this type of port > forwarding by assigning the port as 0. > > Please reply as soon as possible. > > > > Thanks and Regards, > > > > Chandan Tiwari > > NEC HCL ST. > > Noida,India > > > > > > > DISCLAIMER: > ----------------------------------------------------------------------------------------------------------------------- > > The contents of this e-mail and any attachment(s) are confidential and > intended > for the named recipient(s) only. > It shall not attach any liability on the originator or NECHCL or its > affiliates. Any views or opinions presented in > this email are solely those of the author and may not necessarily reflect the > opinions of NECHCL or its affiliates. > Any form of reproduction, dissemination, copying, disclosure, modification, > distribution and / or publication of > this message without the prior written consent of the author of this e-mail > is > strictly prohibited. If you have > received this email in error please delete it and notify the sender > immediately. . > -----------------------------------------------------------------------------------------------------------------------