Does it work correctly into a dummy load. It sounds like RF in the audio, 73 Kurt W7QHD > On Apr 23, 2018, at 8:32 AM, Ray W2RS via Elecraft <elecraft@mailman.qth.net> > wrote: > > > My KXPA100 transmits distorted audio on SSB, but works normally on CW and > RTTY. With 100 watts output, drain current is 11.7 A and supply voltage is > 13.1 V, down from 13.7 V on receive. My power supply is a pre-MFJ Astron > RS-35A. > > > The KX3 with which I drive it operates normally on all bands and modes, with > good transmit audio. Speech compression is off and mic gain is set to 20. > > > Should I send the amp back to Elecraft for service, or is there another > problem? > > > 73 Ray W2RS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to vwrace...@gmail.com
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
