On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar <barrylaz...@gmail.com> wrote:
> is the pan presentation fixed as to frequency span or can the frequency > span be adjusted; I typically use 25-50 KHz on CW or > less on data modes. Span and center frequency are adjustable. Fixed or tracking mode is available. Scrolling mode (to prevent VFO cursor from going off screen) has different options, similar to P3: full page, half page, slide, etc. > Next can the xvter IF out be used as the IF out on the K4D? Probably it will work the same as a K3. > Or, is the I&Q available for use o0n applications like CW Skimmer; This > requires a MME format. > I don't think that will work. Connecting a separate SDR to RX ANT OUT would be a simpler way to do it. A program like HDSDR can keep the SDR frequency in sync with the K4 frequency. 73, Bob, N6TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com