Hello all, unfortunately I'm not too familiar with U.S. standards. I am looking for the equivalent information of BS 1363-1 that would describe the standard U.S. mains plug and socket dimensions, plug pin lengths, spacings etc. I nice 2D dimensioned drawing would be ideal.
The reason is we are needing to make sure some third party sourced plug top 'wall wart' power supply units intended for use in the U.S. will be correct mechanically regards the plug & pins. Thanks for any help, much appreciated. Matthew Wilson Technical Director GB Electronics (UK) Ltd matthew.wil...@gbelectronics.com https://gbelectronics.uk +44 (0)1903 244 500 Ascot House//Mulberry Close//Woods Way Goring-by-Sea//West Sussex//BN12 4QY//UK Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete it from your system, do not use or disclose the information in any way and notify the sender immediately. The contents of this message may contain personal views which are not the views of the company, unless specifically stated. GB Electronics (UK) Ltd is a company registered in England and Wales under number 06210991. Registered office: Ascot House Mulberry Close, Woods Way, Goring By Sea, West Sussex, BN12 4QY. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>