Hello, Appreciate your quick response. But still it's not so clear. Cause Cisco concepts are not getting out of my mind. Oh God please help...:).....
Suppose ge.1.1 is the L2 switch port which is connected to L3 switch. And I want all traffic from different vlan configured on that L2 switch will reach the L3 switch through the same ge.1.1 port and vlan routing will take place. What should be the configuration in L2 and L3 switch???? Best Regards, Abhijit Pal SIEMENS Information systems Limited. GO/ GTAS(Global Technology Application Services) 13th Floor, Tower-2,Millenium City Bldg, DN-62,Sector-5,SaltLake, Kolkata-700091. DID: +91 33 2339 9396 Board:+91 33 2339 9000 Fax: +91 33 2339 9001 ________________________________ From: Adell Querol, Christian [mailto:cadel...@tv3.cat] Sent: Wednesday, June 03, 2009 4:19 PM To: Enterasys Customer Mailing List Subject: RE: [enterasys] Vlan configuration issue. Hi, You don't need to define a port as trunk port, you only have to put the port in the egress table for the vlans you need. For example, set vlan create 2 set vlan create 3 set vlan egress 2 ge.1.1 set vlan egress 3 ge.1.1 With this configuration you are sending frames from vlans 2 and 3 through this port. You can check it using "show port egress ge.1.1" You can implement more options, but this is the basic configuration. Regards, Christian Adell Querol Servei Informàtic de Comunicacions de Producció c/ de la TV3 s/n · 08970 Sant Joan Despí (Baix Llobregat) Telèfon 93 552 80 88 www.tv3.cat<http://www.tv3.cat/> <http://www.tv3.cat/> ________________________________ De: Pal, Abhijit IN CCU SISL [mailto:abhijit....@siemens.com] Enviat: miércoles, 03 de junio de 2009 12:43 Per a: Enterasys Customer Mailing List Tema: [enterasys] Vlan configuration issue. Hello, We have recently bought 10-12 Enterasys switches out of which 2-3 are SecureStack C3 and rest are SecureStack B3. We have planned to use B3 switches as L2 and C3 as L3. L2 switches will have vlan configured in it. The L3 switches will be used for Vlan routing. The links between L3 and L2 switches will be trunks. So how will I define a port as trunk port??????? Need immediate help. Best Regards, Abhijit Pal SIEMENS Information systems Limited. GO/ GTAS(Global Technology Application Services) 13th Floor, Tower-2,Millenium City Bldg, DN-62,Sector-5,SaltLake, Kolkata-700091. DID: +91 33 2339 9396 Board:+91 33 2339 9000 Fax: +91 33 2339 9001 ________________________________ Important notice: This e-mail and any attachment there to contains corporate proprietary information. If you have received it by mistake, please notify us immediately by reply e-mail and delete this e-mail and its attachments from your system. Thank You. * --To unsubscribe from enterasys, send email to lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe enterasys cadel...@tv3.cat * --To unsubscribe from enterasys, send email to lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe enterasys abhijit....@siemens.com ________________________________ Important notice: This e-mail and any attachment there to contains corporate proprietary information. If you have received it by mistake, please notify us immediately by reply e-mail and delete this e-mail and its attachments from your system. Thank You. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
