I can't get a CD writer to work - all the device configuration seems OK, and
the model is listed as "known to work" on the main compatibility list
(http://wt.xpilot.org/cgi-bin/winni/lsc-orig.pl), and, Herr Schilling lists it
as one of the units he has to play with.
Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'LG ' 'CD-RW CED-8080B ' '1.04' Removable CD-ROM
The error log from 'gcombust' is:
Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8080B '
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size : 4194304 = 4096 KB
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Track 01: audio 45 MB (04:28.49) no preemp
Track 02: audio 35 MB (03:31.80) no preemp
Track 03: audio 54 MB (05:21.53) no preemp
Track 04: audio 36 MB (03:38.93) no preemp
Track 05: audio 63 MB (06:17.10) no preemp
Track 06: audio 44 MB (04:26.00) no preemp
Track 07: audio 33 MB (03:20.40) no preemp
Track 08: audio 37 MB (03:42.02) no preemp
Track 09: audio 165 MB (16:21.04) no preemp
Track 10: audio 41 MB (04:04.06) no preemp
Track 11: audio 27 MB (02:44.96) no preemp
Track 12: audio 31 MB (03:06.17) no preemp
Lout start: 620 MB (61:26/40) = 276340 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in: -11231 (97:32/19)
ATIP start of lead out: 359847 (79:59/72)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 83507
Starting to write CD/DVD at speed 4 in dummy TAO mode for single session.
/usr//bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
Track 01: 0 of 45 MB written.
write track data: error after 0 bytes
Writing time: 5.020s
Average write speed 734.8x.
WARNING: Some drives don't like fixation in dummy mode.
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
/usr//bin/cdrecord: fifo had 64 puts and 1 gets.
/usr//bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
100%.
Any ideas?? Is the old firmware level (1.4) an issue?
Thanks.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
