> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Matthew Seaman > Sent: Saturday, October 11, 2008 12:49 AM > To: Richard Smith > Cc: freebsd-questions@freebsd.org > Subject: Re: dmesg: Invalid time in clock: check and reset the date > > > Richard Smith wrote: > > Hi, I've just installed FreeBSD 7.0 Release along with Windows > XP on my PC. I found that when I set the clock to the correct > time&date, next time I boot into FreeBSD it changes and reports > the wrong time&date. Both BIOS and Windows reports the time correctly. > > > > dmesg shows the following message: > > Invalid time in clock: check and reset the date! > > > > Can't figure out what's wrong... any help will be appreciated. > > Is the time out by an exact number of hours?[*] Does the offset > correspond to your localities' timezone offset from UTC? > > If so, then what is happening is this: Windows will only deal with > one timezone at a time, and it expects the system clock (and > consequently the CMOS clock on the motherboard) to be set to the > local wall-clock time. > > Unix in comparison allows each process to be run in an arbitrary > timezone, simply by setting the TZ environment variable. It > expects the system clock and the CMOS clock to be set to UTC, and > it calculates the local offset as required. > > When you reboot the machine, the internal system clock is set from > the cmos clock, so one or the other OS will end up thinking local > wall-clock time is UTC or vice-versa. Unless you have the happy > fortune to be living in this Sceptered Isle (but only during the > wintertime), or in certain parts of West Africa that's going to > cause problems. > > If you need to dual-boot, FreeBSD provides a mechanism for allowing > the CMOS clock to be set to wallclock time. You can toggle the > setting using /usr/sbin/tzsetup -- if there is a zero length file > /etc/wall_cmos_clock then your system is running in compatability > mode. Note: this file should not appear on a box that is dedicated > to running FreeBSD[+] -- the tzsetup default is the /wrong/ choice > in this case. >
No, it's not. There is nothing wrong with running the CMOS clock on wall-clock time even on a dedicated system. You can do it any way you please. Any real server should be synced by NTP in any case since the internal RTC clock chip in a PC is not reliable or accurate. Note that if you do run the CMOS clock on UTC that if your BIOS/CMOS has a fancy auto-adjusting daylight savings time thingie in it, you should disable that. Ted _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
