Christoph Kukulies schrieb:
Julien Cigar schrieb:
I've this problem too on almost all my machines. The only solution I've
found is to disable DMA (atapi_dma), but then performances are very poor
What I've found is enable/disable IDE Master in the BIOS settings. I
disabled it to no avail.
Just bought a SATA CD/DVD burner hoping to get along with this.
Pitfall - SATA CDROM drive is not seen by the BIOS so I cannot boot from
it or
is there a way to get around this? Any other method to boot from? This
motherboard isn't one of the
newest, in contrary, quite old. Doesn't seem to support boot from USB
device, so I depend on
getting the system booted from CDROM.
--
Christoph Kukulies
--
Christoph Kukulies
(and I'm still unable to burn a CD/DVD)
On Tue, 2008-11-04 at 16:03 +0100, Christoph Kukulies wrote:
Hi,
don't know whether it's the CDROM drive (a Creative 52x mx) or the
motherboard (ASUS P4S8X) or what.
Anyway, I tried to install a recent version of FreeBSD (7.1-BETA2)
and the installation
hangs right in the boot process of the installation CD disc1.
I see
acd0: FAILURE - READ BIG MEDIUM ERROR asc=0x11 ascq=0x00
run_interrupt_driven_hooks: still waiting after 60 seconds for
xpt_config
run_interrupt_driven_hooks: still waiting after 120 seconds for
xpt_config
run_interrupt_driven_hooks: still waiting after 180 seconds for
xpt_config
and so on.
Any clues?
--
Christoph Kukulies
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
