On Mon, Jun 8, 2009 at 9:16 AM, Wojciech Puchar < woj...@wojtek.tensor.gdynia.pl> wrote:
> > the type fdisk /dev/da1 and then compare the sectors values with what dmesg > says > > fdisk /dev/ad2 : ******* Working on device /dev/ad2 ******* parameters extracted from in-core disklabel are: cylinders=155127 heads=16 sectors/track=63 (1008 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=155127 heads=16 sectors/track=63 (1008 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 41929587 (20473 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 1023/ head 254/ sector 63 The data for partition 2 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 41929650, size 114430995 (55874 Meg), flag 0 beg: cyl 1023/ head 255/ sector 63; end: cyl 1023/ head 254/ sector 63 dmesg doesn't say anything usefull. only: ad2: 76351MB <SAMSUNG SP0802N TK200-04> at ata1-master UDMA100 I'm not pretty good at this but it seams ok. the disk has been 99% full before and no problems. The slices were created a long time ago and ran some random test that all came out ok. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"