I will have to check on its next lockup. It happens about every week
to week and a half.
Troy Beisigl
On Jan 3, 2011, at 8:49 PM, Mike Tancsa wrote:
On 1/3/2011 9:14 PM, Troy Beisigl wrote:
Hi Mike,
We are running the latest firmware. We upgraded to it in case this
was the issue. As you can see from the log entry below, it shows
the file system was not shut down cleanly because it was locked and
had to be powered off. We are using Intel motherboards, so maybe
something with FreeBSD and this card with the Intel motherboard? I
know that this card works just fine with this board on CentOS, so...
When it locks up, are you sure its the disk that locks up ? From the
console, if you do a CTRL+T, what does it show its blocking on ? Are
you
able to build a debug kernel to see where things are stuck ?
---Mike
Dec 29 17:36:12 web01 kernel: twa0: <3ware 9000 series Storage
Controller> port 0xd000-0xd0ff mem 0xd0000000-0xd1ffffff,
0xd2020000-0xd2020fff irq 16 at device 0.0 on pci1
Dec 29 17:36:12 web01 kernel: twa0: [ITHREAD]
Dec 29 17:36:12 web01 kernel: twa0: WARNING: (0x04: 0x0008):
Unclean shutdown detected: unit=0
Dec 29 17:36:12 web01 kernel: twa0: INFO: (0x15: 0x1300):
Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X
4.10.00.007, BIOS BE9X 4.08.00.002
Troy Beisigl
---- Original Message ----
From: Mike Tancsa <m...@sentex.net>
To: "Troy Beisigl" <t...@i2bnetworks.com>
Cc: freebsd-questions@freebsd.org
Sent: Mon, Jan 3, 2011, 13:32 PM
Subject: Re: 9650SE-2LP raid card locks system
I have a number of these cards and they work very well for us. What
version of the firmware are you using on the card ?
I have this on a busy db server. But its RELENG8.
twa0: <3ware 9000 series Storage Controller> port 0x1000-0x10ff mem
0xb0000000-0xb1ffffff,0xb4000000-0xb4000fff irq 19 at device 0.0
on pci12
twa0: [ITHREAD]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2
ports, Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004
I have had good luck with Areca cards as well, but they start in 4
port
models. But really, all should work just fine with this 3ware/LSI
card
---Mike
On 1/3/2011 3:58 PM, Troy Beisigl wrote:
Hi All,
We have been seeing a problem with FreeBSD 7.3 and up where the
system
will just hang when using a 9650SE-2LP raid card and 2 500G drives
mirrored. The system will run for about a week and then the
filesystem
just hangs, causing the system to hang. We've looked through the
logs
and found nothing at all. We have changed the card and then the
motherboard but the problem still exists. We have run this card
with
CentOS without fail in the same system configuration.
If the card is not supported, can anyone recommend one that does
work?
Thanks,
Troy Beisigl
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscr...@freebsd.org"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org
"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org
"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"