Forgot to mention my loader.conf; if_mxge_load="YES" mxge_ethp_z8e_load="YES" mxge_eth_z8e_load="YES" mxge_rss_ethp_z8e_load="YES" mxge_rss_eth_z8e_load="YES"
I blindly added these w/o thinking what they do. Should I simply only load the first line? - aurf On Aug 16, 2013, at 8:18 AM, aurfalien wrote: > Hi, > > I've been suspecting my NIC is not up to par and notice this in the logs > every few minutes; > > Aug 16 08:05:06 prometheus kernel: mxge0: slice 0 struck? ring state: > Aug 16 08:05:06 prometheus kernel: mxge0: tx.req=1914503981 > tx.done=1914503810, tx.queue_active=0 > Aug 16 08:05:06 prometheus kernel: mxge0: tx.activate=0 tx.deactivate=0 > Aug 16 08:05:06 prometheus kernel: mxge0: pkt_done=1824019832 fw=1824019931 > Aug 16 08:05:06 prometheus kernel: mxge0: Watchdog reset! > Aug 16 08:05:06 prometheus kernel: mxge0: NIC did not reboot, not resetting > > Could tis be effecting throughput? > > My card is a Myri-10G-PCIE-8A > > I did install the Myrinet dev tools for FreeBSD and ran myri_info which > yields; > > pci-dev at 05:00.0 vendor:product(rev)=14c1:0008(00) > behind bridge root-port: 00:03.0 8086:3c08 (x8.1/x16.3) > Myri-10G-PCIE-8A -- Link x8 > EEPROM String-spec: > MAC=00:60:dd:45:73:23 > SN=413665 > PWR=100 > PC=10G-PCIE-8A-R > PN=09-03852 > XFI=AEL1010 > TAG=ze_tools-1_4_45 > > EEPROM MCP, PRESENT, length = 103384, crc=0x119daf46 > ETHZ::1.4.45 2009/08/22 18:57:06 self extracting firmware > Bundle: exec_len=72144, PCI-ROM-len = 31232 > Running MCP: > ETH ::1.4.55 -P- 2012/04/21 01:48:34 myri10ge firmware > > Any insights are appreciated. > > - aurf _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
