On Tue, Oct 30, 2012 at 12:14 PM, Deep Shah <deep.s...@strixsystems.com> wrote: > Please find below my pam_radius_auth.conf file snap shot. > # pam_radius_auth configuration file. Copy to: /etc/raddb/server
Is it in the correct place? Since your earlier logs says "/usr/local/etc/raddb", you might also try copying the file there, just in case. > Please find below my client.conf file snap shot which is taken from server > side. My client IP is 192.168.100.18 and my server IP is 192.168.100.27. That's not what you said in your earlier post > Can you please let me know which configuration is wrong if there is any? Not sure. For this I'd actually suggest you start with known good working config. Either RHEL/Centos or Ubuntu/Debian is usually a good place to start. IIRC last time I tested this with RHEL it works just fine. Assuming you configure it correctly (hint: read the READMEs and docs that comes with the source/package). After you at least got THAT to work, then start working on your busybox-thingy. Just in case it's busybox-specific bug, in which case you should probably ask the devs there. -- Fajar - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html