On 28/06/16 19:12, Evans, Kyle wrote:
Hi Jiffin,
Thanks for confirming that it is a bug and it is fixed in a newer
version; I appreciate it.
no problem
Kyle
From: Jiffin Tony Thottan
Date: Tuesday, June 28, 2016 at 4:53 AM
To: Kyle Evans, "gluster-users@gluster.org
<mailto:gluster-users@gluster.org>"
Subject: Re: [Gluster-users] setfacl: Operation not supported
Hi Evans,
Sorry for the delayed reply.
I tried to reproduce on my setup(version 3.7.9) and it was working
fine for me.
But it was fairly reproducible with version which you had mentioned. I
don't know
which patch got fixed that issue, still I suggest to update your
gluster so that both
issues mentioned below will be solved
On 24/06/16 23:43, Evans, Kyle wrote:
Hi Jiffin,
Thanks for the help. You understand correctly, I am talking about
the client. The problem is intermittent, and those lines DO appear
in the log when it works but DO NOT appear in the log when it is
broken. Also, here is another log I am getting that may be relevant:
[2016-06-13 17:39:33.128941] I [dict.c:473:dict_get]
(-->/usr/lib64/glusterfs/3.7.5/xlator/system/posix-acl.so(posix_acl_setxattr_cbk+0x26)
[0x7effdbdfb3a6]
-->/usr/lib64/glusterfs/3.7.5/xlator/system/posix-acl.so(handling_other_acl_related_xattr+0x22)
[0x7effdbdfb2a2] -->/lib64/libglusterfs.so.0(dict_get+0xac)
[0x7effef3e80cc] ) 0-dict: !this || key=system.posix_acl_access
[Invalid argument]
Ignore this , this is spurious message which was fixed by this patch
http://review.gluster.org/#/c/13452/
--
Regards
Thanks,
Kyle
From: Jiffin Tony Thottan
Date: Friday, June 24, 2016 at 2:17 AM
To: Kyle Evans, "gluster-users@gluster.org"
Subject: Re: [Gluster-users] setfacl: Operation not supported
On 24/06/16 02:08, Evans, Kyle wrote:
I'm using gluster 3.7.5-19 on RHEL 7.2 Gluster periodically stops
allowing ACLs. I have it configured in fstab like this:
Server.example.com:/dir /mnt glusterfs defaults,_netdev,acl 0 0
Also, the bricks are XFS.
It usually works fine, but sometimes after a reboot, one of the
nodes won't allow acl operations like setfacl and getfacl. They
give the error "Operation not supported".
Did u meant client reboot ?
Correct me if I am wrong,
You have mounted the glusterfs volume with acl enabled and configured
in fstab
When you reboot client, acl operations are returning error as
"Operation not supported".
Can please follow the steps if possible
after mounting can check the client log (in your example it should be
/var/log/glusterfs/mnt.log)
and confirm whether following block is present in the vol graph
"volume posix-acl-autoload
type system/posix-acl
subvolumes dir
end-volume"
Clear the log file before reboot and just check whether same block is
present after reboot
--
Jiffin
Sometimes it's not even after a reboot; it just stops supporting it.
If I unmount and remount, it starts working again. Does anybody
have any insight?
Thanks,
Kyle
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.orghttp://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users