I have a HackRF One that will not power on and connect to PC. I get no
LEDs illuminating when connecting to PC with or without the DFU button
depressed. I've tested on several PCs and with different USB cables. I
have another HackRF One that works perfectly with the same PC/cables.
I only have Linux boxes. Here's the dmesg logs from this morning.
Plugged in, no buttons pressed:
[Wed Aug 29 07:06:32 2018] usb 2-5.3: new low-speed USB device number 37
using ehci-pci
[Wed Aug 29 07:06:32 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:32 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:33 2018] usb 2-5.3: new low-speed USB device number 38
using ehci-pci
[Wed Aug 29 07:06:33 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:33 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:33 2018] usb 2-5-port3: attempt power cycle
Plugged in holding DFU button:
[Wed Aug 29 07:06:41 2018] usb 2-5.3: new low-speed USB device number 40
using ehci-pci
[Wed Aug 29 07:06:41 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:41 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:41 2018] usb 2-5.3: new low-speed USB device number 41
using ehci-pci
[Wed Aug 29 07:06:41 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:42 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:42 2018] usb 2-5-port3: attempt power cycle
Plugged in holding Reset button:
[Wed Aug 29 07:06:45 2018] usb 2-5.3: new low-speed USB device number 43
using ehci-pci
[Wed Aug 29 07:06:45 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:45 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:45 2018] usb 2-5.3: new low-speed USB device number 44
using ehci-pci
[Wed Aug 29 07:06:46 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:46 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:46 2018] usb 2-5-port3: attempt power cycle
Plugged in holding Reset and DFU button:
[Wed Aug 29 07:06:49 2018] usb 2-5.3: new low-speed USB device number 46
using ehci-pci
[Wed Aug 29 07:06:49 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:50 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:50 2018] usb 2-5.3: new low-speed USB device number 47
using ehci-pci
[Wed Aug 29 07:06:50 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:50 2018] usb 2-5.3: device descriptor read/64, error -32
[Wed Aug 29 07:06:50 2018] usb 2-5-port3: attempt power cycle
Full Disclosure:
This unit was purchase from NooElec as a pre-order in June 2014. I
purchased my second one as a used unit from a ham at the Huntsville
Hamfest in 2016 after my original stopped working.
What brings this on now is a comment Michael made on Git Hub about
replace/repair any HackRF One. I did contact i...@greatscottgadgets.com
and was referred to post here for further troubleshooting.
Thanks
Craig
_______________________________________________
HackRF-dev mailing list
HackRF-dev@greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
