On Wed, Oct 21, 2009 at 10:10 AM, Gustav Degreef <gusta...@gmail.com> wrote:
> >> >> On 10/20/09, Vasily Khoruzhick <anars...@gmail.com> wrote: >> >>> В сообщении от 20 октября 2009 18:40:20 автор Gustav Degreef написал: >>> >>> >>> > Thanks Vasily. I followed the instructions on this page: >>> > >>> > http://www.handhelds.org/moin/moin.cgi/HpIpaqRx1950Documentation >>> >>> >>> > >>> > and it says to make the first partition ext2 and then to put the rootfs >>> on >>> > it. Is it incorrect? If so, then I'll redo the whole thing >>> again. I'm >>> > sure I'll get it to boot since others have done it. Appreciate the >>> help. >>> > Gustav >>> >>> >>> It does not matter on which partition you put rootfs, just specify this >>> partition as root in cmdline in default.txt. >>> >>> Regards >>> >>> Vasily >> >> >> >> OK, changed my default.txt and tried several times to boot and it kernel >> panics. >> >> With set cmdline "root=/dev/mmcblk0p2 the last few lines on the display >> say: >> >> rx1950: disabled charge >> fat: utf8 is not a recommended charset TO fat filesystems will be case >> sensitive! >> YES: mounted root (vfat filesystem) >> Freeing init memmory 140K >> Warning: unable to open on initial console >> kernel panic - not syncing: No init found. Try passing int = option to >> kernel. >> >> If I set cmdline "root=/dev/mmcblk0p1, the messages are a bit different, >> but the last line on the display is still the same kernel panic message. >> >> Suggestions welcome. I'm sure I'll get it. Seems I'm doing something >> wrong. Thanks. Gustav >> > On 10/21/09, Sébastien Lorquet <squa...@gmail.com> wrote:I'm not sure wether linux can boot on a vfat rootfs. I've been using linux for about 10 years, almost exclusively on my desktop. But the answer to my post confuses me. What am I doing wrong? Gustav
_______________________________________________ Haret mailing list Haret@handhelds.org https://handhelds.org/mailman/listinfo/haret
