thanks travis.... for the quick note back to doug... On Wednesday, July 7, 2004 10:17 AM, Travis Rabe <[EMAIL PROTECTED]> wrote: >NO NO NO. > >Do not change the serial number on a dynamic zone file with the service >running and if there is a .jnl file present. Use nsupdate to do any >on-the-fly updates. > >T > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Bob McGregor >Sent: Wednesday, July 07, 2004 9:13 AM >To: [EMAIL PROTECTED] >Subject: Re: [IMail Forum] OT : DNS / DHCP headaches > >doug, > >I use the same solution here. On the DNS box, check system32/dns/etc to see >if the reverse files are there. Also, there is a named.conf in the >system32/ect that is the controller file for bind. > >I don't use it but 9.2.3 may do dynamic dns so you'll have to look there. >Hopefully the prior person left some notes there. > >Within the above folder you should see the revese files foe each Ip range >you have. It may be as simple as incrementing your serial number and >removing the duplicates you want to have out and then stopping/restarting >bind. > >You really do need to look at the named.conf file and see how things are >configured there first. It will have the names of the files you'll need to >refer to as well as how it's setup to operate. If it's setup for dynamic, >removing the reverse multiple names will not do anything for you, they'll >just show up again, I think. > >bob > >oh, also, check out http://www.isc.org/ and follow the bind link. there are >archives of bind questions there. > >On Wednesday, July 7, 2004 9:42 AM, Doug Anderson ><[EMAIL PROTECTED]> wrote: >> >>I know this is definately off topic, but with all the service >>providers and consulting firms out on this list I figured I'd toss this >out. >>I inherited a network configuration that is using MS Dhcp >>server (w2k) and Bind 9.2.3 build for W2k. >> >>Everything seems to work ok except I get "leftovers" in the >>reverse file. Leftover - multiple names resolving to the same IP. >> >>Any ideas on how to stop this would be appreciated OR if you >>know of a tool which can rebuild the reverse from the forward, >>let me know. > > >To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html >List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ > > > >To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html >List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ >
To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/
