On Mon, Jan 07, 2013 at 10:12:12AM +0100, Sjoerd Simons wrote: > On Sun, 2013-01-06 at 22:13 +0100, Daniel Vetter wrote: > > Now with the intel-gfx m-l address fixed ... > > -Daniel > > > > On Sun, Jan 6, 2013 at 10:13 PM, Daniel Vetter <daniel.vet...@ffwll.ch> > > wrote: > > > Hi all, > > > > > > Looks ugly, and the original commit doesn't have any link to the > > > dmidecode information. Sjoerd&John, can you both please attach the > > > output of dmidecode? If we're lucky, we can differentiate the two > > > models somehow, if not we need to revert this patch, since regressions > > > win over simple bugs. > > Mine is attached, unfortunately the only interesting difference seems to > be the Base board serial number: > - Serial Number: /sku > + Serial Number: XXXXXXXX > > But given we both have an ID12 that's most likely not very relevant (or > maybe different bios versions do different amounts of setup on the hdmi > bridge). > > Even though i did some attempts i've never seen the hdmi output work in > linux (and didn't know it was attached to LVDS). John did mention it > only works up to 720p, so it could very well be i simply never send it a > mode it actually supports. > > Reverting this patch will cause a regression in that the higher levels, > e.g. X, always thinks there is an output on the LVDS port so it comes up > in a very odd mode (but at least one can work around that with > configuration), so i guess the patch should be reverted :/ > > Ideally we'd find a way to do hotplug detection on the lvds-to-hdmi > bridge (any ideas where to look for that would be much appreciated).
Unfortunately I have no clue (nor docs) how lvds->hdmi chains are supposed to work. For real hdmi support we'd need a few things at least: - some way to set up infoframes - some way to switch between single-link and dual-link lvds modes (for the higher resolutions) - some way to do hotplug detection (I guess we could use polling on the i2c pins as a fallback) All this needs a new hdmi_on_lvds encoder/connector with relevant code, plus a way to figure out whether we need this (either with a quirk table or by looking at some magic vbt value I'm not aware of). In short: Tons of work to make this work, and very unlikely that we'll get around to it. If you're bored though I could give you some ideas though on the #intel-gfx irc channel. I've reverted the quirk entry to fix the regression. Cheers, Daniel > > > > Yours, Daniel > > > > > > On Tue, Dec 25, 2012 at 12:39 PM, John Tapsell <johnf...@gmail.com> wrote: > > >> I have a Zotac ZDBOX SD ID12 and the following commit means that I no > > >> longer have HDMI output. > > >> > > >> I've been told that I have a lvds-to-hdmi bridge, so this commit broke > > >> that. > > >> > > >> Commit: > > >> > > >> drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13 > > >> > > >> BugLink: https://bugs.launchpad.net/bugs/1064924 > > >> > > >> This box claims to have an LVDS interface but doesn't > > >> actually have one. > > >> > > >> Signed-off-by: Sjoerd Simons <sjoerd.sim...@collabora.co.uk> > > >> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch> > > >> (cherry picked from commit 9756fe38d10b2bf90c81dc4d2f17d5632e135364) > > >> > > >> Signed-off-by: Joseph Salisbury <joseph.salisb...@canonical.com> > > >> Signed-off-by: Tim Gardner <tim.gard...@canonical.com> > > > > > > > > > > > > -- > > > Daniel Vetter > > > Software Engineer, Intel Corporation > > > +41 (0) 79 365 57 48 - http://blog.ffwll.ch > > > > > > > > > # dmidecode 2.11 > SMBIOS 2.6 present. > 22 structures occupying 1065 bytes. > Table at 0x000FB9E0. > > Handle 0x0000, DMI type 0, 24 bytes > BIOS Information > Vendor: American Megatrends Inc. > Version: 080016 > Release Date: 12/23/2010 > Address: 0xF0000 > Runtime Size: 64 kB > ROM Size: 1024 kB > Characteristics: > ISA is supported > PCI is supported > PNP is supported > BIOS is upgradeable > BIOS shadowing is allowed > ESCD support is available > Boot from CD is supported > Selectable boot is supported > BIOS ROM is socketed > EDD is supported > 5.25"/1.2 MB floppy services are supported (int 13h) > 3.5"/720 kB floppy services are supported (int 13h) > 3.5"/2.88 MB floppy services are supported (int 13h) > Print screen service is supported (int 5h) > 8042 keyboard services are supported (int 9h) > Serial services are supported (int 14h) > Printer services are supported (int 17h) > CGA/mono video services are supported (int 10h) > ACPI is supported > USB legacy is supported > LS-120 boot is supported > ATAPI Zip drive boot is supported > BIOS boot specification is supported > Targeted content distribution is supported > BIOS Revision: 8.16 > > Handle 0x0001, DMI type 1, 27 bytes > System Information > Manufacturer: ZOTAC > Product Name: ZBOXSD-ID12/ID13 > Version: XX > Serial Number: GXXXX160XXXXX > UUID: 03000200-0400-0500-0006-000700080009 > Wake-up Type: Power Switch > SKU Number: NA > Family: NA > > Handle 0x0002, DMI type 2, 15 bytes > Base Board Information > Manufacturer: ZOTAC > Product Name: ZBOXSD-ID12/ID13 > Version: XX > Serial Number: XXXXXXXX > Asset Tag: NA > Features: > Board is a hosting board > Board is replaceable > Location In Chassis: NA > Chassis Handle: 0x0003 > Type: Motherboard > Contained Object Handles: 0 > > Handle 0x0003, DMI type 3, 21 bytes > Chassis Information > Manufacturer: To Be Filled By O.E.M. > Type: Desktop > Lock: Not Present > Version: To Be Filled By O.E.M. > Serial Number: To Be Filled By O.E.M. > Asset Tag: To Be Filled By O.E.M. > Boot-up State: Safe > Power Supply State: Safe > Thermal State: Safe > Security Status: None > OEM Information: 0x00000000 > Height: Unspecified > Number Of Power Cords: 1 > Contained Elements: 0 > > Handle 0x0004, DMI type 4, 42 bytes > Processor Information > Socket Designation: CPU 1 > Type: Central Processor > Family: Atom > Manufacturer: Intel > ID: CA 06 01 00 FF FB EB BF > Signature: Type 0, Family 6, Model 28, Stepping 10 > Flags: > FPU (Floating-point unit on-chip) > VME (Virtual mode extension) > DE (Debugging extension) > PSE (Page size extension) > TSC (Time stamp counter) > MSR (Model specific registers) > PAE (Physical address extension) > MCE (Machine check exception) > CX8 (CMPXCHG8 instruction supported) > APIC (On-chip APIC hardware supported) > SEP (Fast system call) > MTRR (Memory type range registers) > PGE (Page global enable) > MCA (Machine check architecture) > CMOV (Conditional move instruction supported) > PAT (Page attribute table) > PSE-36 (36-bit page size extension) > CLFSH (CLFLUSH instruction supported) > DS (Debug store) > ACPI (ACPI supported) > MMX (MMX technology supported) > FXSR (FXSAVE and FXSTOR instructions supported) > SSE (Streaming SIMD extensions) > SSE2 (Streaming SIMD extensions 2) > SS (Self-snoop) > HTT (Multi-threading) > TM (Thermal monitor supported) > PBE (Pending break enabled) > Version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz > Voltage: 1.1 V > External Clock: 200 MHz > Max Speed: 1800 MHz > Current Speed: 1800 MHz > Status: Populated, Enabled > Upgrade: Socket LGA775 > L1 Cache Handle: 0x0005 > L2 Cache Handle: 0x0006 > L3 Cache Handle: Not Provided > Serial Number: To Be Filled By O.E.M. > Asset Tag: To Be Filled By O.E.M. > Part Number: To Be Filled By O.E.M. > Core Count: 2 > Core Enabled: 2 > Thread Count: 4 > Characteristics: > 64-bit capable > > Handle 0x0005, DMI type 7, 19 bytes > Cache Information > Socket Designation: L1-Cache > Configuration: Enabled, Not Socketed, Level 1 > Operational Mode: Write Back > Location: Internal > Installed Size: 48 kB > Maximum Size: 48 kB > Supported SRAM Types: > Other > Installed SRAM Type: Other > Speed: Unknown > Error Correction Type: Parity > System Type: Data > Associativity: Other > > Handle 0x0006, DMI type 7, 19 bytes > Cache Information > Socket Designation: L2-Cache > Configuration: Enabled, Not Socketed, Level 2 > Operational Mode: Write Back > Location: Internal > Installed Size: 1024 kB > Maximum Size: 1024 kB > Supported SRAM Types: > Other > Installed SRAM Type: Other > Speed: Unknown > Error Correction Type: Single-bit ECC > System Type: Unified > Associativity: 8-way Set-associative > > Handle 0x0007, DMI type 5, 20 bytes > Memory Controller Information > Error Detecting Method: 64-bit ECC > Error Correcting Capabilities: > None > Supported Interleave: One-way Interleave > Current Interleave: One-way Interleave > Maximum Memory Module Size: 4096 MB > Maximum Total Memory Size: 8192 MB > Supported Speeds: > Other > Supported Memory Types: > DIMM > SDRAM > Memory Module Voltage: 3.3 V > Associated Memory Slots: 2 > 0x0008 > 0x0009 > Enabled Error Correcting Capabilities: > None > > Handle 0x0008, DMI type 6, 12 bytes > Memory Module Information > Socket Designation: DIMM0 > Bank Connections: 0 1 > Current Speed: Unknown > Type: DIMM SDRAM > Installed Size: 1024 MB (Single-bank Connection) > Enabled Size: 1024 MB (Single-bank Connection) > Error Status: OK > > Handle 0x0009, DMI type 6, 12 bytes > Memory Module Information > Socket Designation: DIMM1 > Bank Connections: 2 3 > Current Speed: Unknown > Type: DIMM SDRAM > Installed Size: Not Installed > Enabled Size: Not Installed > Error Status: OK > > Handle 0x000A, DMI type 13, 22 bytes > BIOS Language Information > Language Description Format: Long > Installable Languages: 1 > en|US|iso8859-1 > Currently Installed Language: en|US|iso8859-1 > > Handle 0x000B, DMI type 15, 35 bytes > System Event Log > Area Length: 4 bytes > Header Start Offset: 0x0000 > Header Length: 2 bytes > Data Start Offset: 0x0002 > Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port > Access Address: Index 0x046A, Data 0x046C > Status: Invalid, Not Full > Change Token: 0x00000000 > Header Format: No Header > Supported Log Type Descriptors: 6 > Descriptor 1: End of log > Data Format 1: OEM-specific > Descriptor 2: End of log > Data Format 2: OEM-specific > Descriptor 3: End of log > Data Format 3: OEM-specific > Descriptor 4: End of log > Data Format 4: OEM-specific > Descriptor 5: End of log > Data Format 5: OEM-specific > Descriptor 6: End of log > Data Format 6: OEM-specific > > Handle 0x000C, DMI type 16, 15 bytes > Physical Memory Array > Location: System Board Or Motherboard > Use: System Memory > Error Correction Type: None > Maximum Capacity: 4 GB > Error Information Handle: Not Provided > Number Of Devices: 2 > > Handle 0x000D, DMI type 19, 15 bytes > Memory Array Mapped Address > Starting Address: 0x00000000000 > Ending Address: 0x0003FFFFFFF > Range Size: 1 GB > Physical Array Handle: 0x000C > Partition Width: 4 > > Handle 0x000E, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x000C > Error Information Handle: Not Provided > Total Width: 64 bits > Data Width: 64 bits > Size: 1024 MB > Form Factor: SODIMM > Set: None > Locator: DIMM0 > Bank Locator: BANK0 > Type: DDR2 > Type Detail: Synchronous > Speed: 800 MHz > Manufacturer: Manufacturer00 > Serial Number: SerNum00 > Asset Tag: AssetTagNum0 > Part Number: ModulePartNumber00 > Rank: Unknown > > Handle 0x000F, DMI type 20, 19 bytes > Memory Device Mapped Address > Starting Address: 0x00000000000 > Ending Address: 0x0003FFFFFFF > Range Size: 1 GB > Physical Device Handle: 0x000E > Memory Array Mapped Address Handle: 0x000D > Partition Row Position: 1 > Interleaved Data Depth: 1 > > Handle 0x0010, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x000C > Error Information Handle: Not Provided > Total Width: Unknown > Data Width: Unknown > Size: No Module Installed > Form Factor: DIMM > Set: None > Locator: DIMM1 > Bank Locator: BANK1 > Type: Unknown > Type Detail: Unknown > Speed: Unknown > Manufacturer: Manufacturer01 > Serial Number: SerNum01 > Asset Tag: AssetTagNum1 > Part Number: ModulePartNumber01 > Rank: Unknown > > Handle 0x0011, DMI type 20, 19 bytes > Memory Device Mapped Address > Starting Address: 0x00000000000 > Ending Address: 0x000000003FF > Range Size: 1 kB > Physical Device Handle: 0x0010 > Memory Array Mapped Address Handle: 0x000D > Partition Row Position: 1 > Interleaved Data Depth: 1 > > Handle 0x0012, DMI type 32, 20 bytes > System Boot Information > Status: No errors detected > > Handle 0x0013, DMI type 41, 11 bytes > Onboard Device > Reference Designation: To Be Filled By O.E.M. > Type: Video > Status: Enabled > Type Instance: 0 > > Handle 0x0014, DMI type 41, 11 bytes > Onboard Device > Reference Designation: To Be Filled By O.E.M. > Type: SCSI Controller > Status: Disabled > Type Instance: 0 > > Handle 0x0015, DMI type 127, 4 bytes > End Of Table > -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
