** Changed in: linux-oem-6.8 (Ubuntu Noble)
Status: New => In Progress
** Changed in: linux-oem-6.8 (Ubuntu Noble)
Assignee: (unassigned) => AceLan Kao (acelankao)
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-6.5 in Ubuntu.
https://bugs.launchpad.net/bugs/2042500
Title:
Fix after-suspend-mediacard/sdhc-insert test failed
Status in HWE Next:
New
Status in linux package in Ubuntu:
In Progress
Status in linux-oem-6.1 package in Ubuntu:
Invalid
Status in linux-oem-6.5 package in Ubuntu:
Invalid
Status in linux-oem-6.8 package in Ubuntu:
In Progress
Status in linux source package in Jammy:
Invalid
Status in linux-oem-6.1 source package in Jammy:
Fix Released
Status in linux-oem-6.5 source package in Jammy:
Fix Released
Status in linux-oem-6.8 source package in Jammy:
Invalid
Status in linux source package in Mantic:
Won't Fix
Status in linux-oem-6.1 source package in Mantic:
Invalid
Status in linux-oem-6.5 source package in Mantic:
Invalid
Status in linux-oem-6.8 source package in Mantic:
Invalid
Status in linux source package in Noble:
In Progress
Status in linux-oem-6.1 source package in Noble:
Invalid
Status in linux-oem-6.5 source package in Noble:
Invalid
Status in linux-oem-6.8 source package in Noble:
In Progress
Bug description:
[Impact]
checkbox test case, after-suspend-mediacard/sdhc-insert, failed.
[Fix]
Commit a7152be79b62 ("Revert "PCI/ASPM: Save L1 PM Substates Capability
for suspend/resume"") reverted saving and restoring of ASPM L1 Substates
due to a regression that caused resume from suspend to fail on certain
systems. However, we never added this capability back and this is now
causing systems fail to enter low power CPU states, drawing more power
from the battery.
The original revert mentioned that we restore L1 PM substate configuration
even though ASPM L1 may already be enabled. This is due the fact that
the pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state().
Try to enable this functionality again following PCIe r6.0.1, sec 5.5.4
more closely by:
1) Do not restore ASPM configuration in pci_restore_pcie_state() but
do that after PCIe capability is restored in pci_restore_aspm_state()
following PCIe r6.0, sec 5.5.4.
2) ASPM is first enabled on the upstream component and then downstream
(this is already forced by the parent-child ordering of Linux
Device Power Management framework).
3) Program ASPM L1 PM substate configuration before L1 enables.
4) Program ASPM L1 PM substate enables last after rest of the fields
in the capability are programmed.
5) Add denylist that skips restoring on the ASUS and TUXEDO systems
where these regressions happened, just in case. For the TUXEDO case
we only skip restore if the BIOS is involved in system suspend
(that's forcing "mem_sleep=deep" in the command line). This is to
avoid possible power regression when the default suspend to idle is
used, and at the same time make sure the devices continue working
after resume when the BIOS is involved.
[Test Case]
1. suspend and resume.
2. check if the error appears in dmesg
~~~
pcieport 0000:00:1c.0: pciehp: Slot(5): Card not present
rtsx_pci 0000:05:00.0: Unable to change power state from D0 to D3hot, device
inaccessible
rtsx_pci 0000:05:00.0: Unable to change power state from D3cold to D0,
device inaccessible
~~~
[where the issue could happen]
low, the patch works well on the reported malfunctioned ASUS platform too.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/2042500/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
