Author: tbm
Date: Wed Jan 30 04:18:17 2008
New Revision: 10275

Log:
Update IXP4xx Ethernet patches.


Modified:
   dists/trunk/linux-2.6/debian/changelog
   dists/trunk/linux-2.6/debian/patches/features/arm/ixp4xx-net-headers.patch
   
dists/trunk/linux-2.6/debian/patches/features/arm/nas100d-net-driver-support.patch
   
dists/trunk/linux-2.6/debian/patches/features/arm/nslu2-net-driver-support.patch
   dists/trunk/linux-2.6/debian/patches/series/1~experimental.1

Modified: dists/trunk/linux-2.6/debian/changelog
==============================================================================
--- dists/trunk/linux-2.6/debian/changelog      (original)
+++ dists/trunk/linux-2.6/debian/changelog      Wed Jan 30 04:18:17 2008
@@ -1,7 +1,11 @@
 linux-2.6 (2.6.24-trunk1) UNRELEASED; urgency=low
 
+  [ maximilian attems ]
   * Fake version
 
+  [ Martin Michlmayr ]
+  * [arm] Update IXP4xx Ethernet patches.
+
  -- maximilian attems <[EMAIL PROTECTED]>  Tue, 29 Jan 2008 22:14:41 +0100
 
 linux-2.6 (2.6.24-1~experimental.1) UNRELEASED; urgency=low

Modified: 
dists/trunk/linux-2.6/debian/patches/features/arm/ixp4xx-net-headers.patch
==============================================================================
--- dists/trunk/linux-2.6/debian/patches/features/arm/ixp4xx-net-headers.patch  
(original)
+++ dists/trunk/linux-2.6/debian/patches/features/arm/ixp4xx-net-headers.patch  
Wed Jan 30 04:18:17 2008
@@ -1,20 +1,21 @@
-diff --git a/include/asm-arm/arch-ixp4xx/platform.h 
b/include/asm-arm/arch-ixp4xx/platform.h
-index 2a44d3d..695b9c4 100644
+http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=4714/2
+
+From: Krzysztof Halasa
+
+Adds platform structs and #defines required by drivers for
+IXP4xx built-in Ethernet and WAN (sync serial) ports.
+
+The actual drivers will reside in drivers/net/arm and
+drivers/net/wan and will be submitted separately.
+
+Signed-off-by: Krzysztof Halasa
+Signed-off-by: Rod Whitby
+
 --- a/include/asm-arm/arch-ixp4xx/platform.h
 +++ b/include/asm-arm/arch-ixp4xx/platform.h
-@@ -77,8 +77,7 @@ extern unsigned long ixp4xx_exp_bus_size;
+@@ -91,6 +91,27 @@ struct ixp4xx_pata_data {
  
- /*
-  * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
-- * used to 
-- * Used as platform_data to provide GPIO pin information to the ixp42x
-+ * used as platform_data to provide GPIO pin information to the ixp42x
-  * I2C driver.
-  */
- struct ixp4xx_i2c_pins {
-@@ -86,6 +85,27 @@ struct ixp4xx_i2c_pins {
-       unsigned long scl_pin;
- };
+ struct sys_timer;
  
 +#define IXP4XX_ETH_NPEA               0x00
 +#define IXP4XX_ETH_NPEB               0x10
@@ -38,7 +39,6 @@
 +};
 +
  /*
-  * This structure provide a means for the board setup code
-  * to give information to th pata_ixp4xx driver. It is
-
+  * Frequency of clock used for primary clocksource
+  */
 

Modified: 
dists/trunk/linux-2.6/debian/patches/features/arm/nas100d-net-driver-support.patch
==============================================================================
--- 
dists/trunk/linux-2.6/debian/patches/features/arm/nas100d-net-driver-support.patch
  (original)
+++ 
dists/trunk/linux-2.6/debian/patches/features/arm/nas100d-net-driver-support.patch
  Wed Jan 30 04:18:17 2008
@@ -1,8 +1,27 @@
+Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig.
+
+Sets up the corresponding platform data for the nslu2 and nas100d
+boards, and reads the ethernet MAC address from the internal flash.
+
+Tested on both little-endian and big-endian kernels.
+
+Signed-off-by: Rod Whitby
+Signed-off-by: Michael Westerhof
+Tested-by: Tom King <[EMAIL PROTECTED]>
+
 diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c 
b/arch/arm/mach-ixp4xx/nas100d-setup.c
-index 54d884f..39d7d90 100644
+index 213a4ce..b0884c2 100644
 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c
 +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -21,6 +21,7 @@
+@@ -12,6 +12,7 @@
+  *
+  */
+ 
++#include <linux/if_ether.h>
+ #include <linux/kernel.h>
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+@@ -21,6 +22,7 @@
  #include <asm/mach-types.h>
  #include <asm/mach/arch.h>
  #include <asm/mach/flash.h>
@@ -10,25 +29,25 @@
  
  static struct flash_platform_data nas100d_flash_data = {
        .map_name               = "cfi_probe",
-@@ -125,12 +126,30 @@ static struct platform_device nas100d_uart = {
+@@ -125,12 +127,30 @@ static struct platform_device nas100d_uart = {
        .resource               = nas100d_uart_resources,
  };
  
 +/* Built-in 10/100 Ethernet MAC interfaces */
 +static struct eth_plat_info nas100d_plat_eth[] = {
-+        {
-+                .phy            = 0,
-+                .rxq            = 3,
++      {
++              .phy            = 0,
++              .rxq            = 3,
 +              .txreadyq       = 20,
-+        }
++      }
 +};
 +
 +static struct platform_device nas100d_eth[] = {
-+        {
-+                .name                   = "ixp4xx_eth",
-+                .id                     = IXP4XX_ETH_NPEB,
-+                .dev.platform_data      = nas100d_plat_eth,
-+        }
++      {
++              .name                   = "ixp4xx_eth",
++              .id                     = IXP4XX_ETH_NPEB,
++              .dev.platform_data      = nas100d_plat_eth,
++      }
 +};
 +
  static struct platform_device *nas100d_devices[] __initdata = {
@@ -41,32 +60,32 @@
  };
  
  static void nas100d_power_off(void)
-@@ -146,6 +165,9 @@ static void nas100d_power_off(void)
+@@ -146,6 +166,10 @@ static void nas100d_power_off(void)
  
  static void __init nas100d_init(void)
  {
++      DECLARE_MAC_BUF(mac_buf);
 +      uint8_t __iomem *f;
 +      int i;
 +
        ixp4xx_sys_init();
  
        /* gpio 14 and 15 are _not_ clocks */
-@@ -165,6 +187,33 @@ static void __init nas100d_init(void)
+@@ -165,6 +189,30 @@ static void __init nas100d_init(void)
        (void)platform_device_register(&nas100d_uart);
  
        platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
 +
-+
 +      /*
 +       * Map in a portion of the flash and read the MAC address.
 +       * Since it is stored in BE in the flash itself, we need to
 +       * byteswap it if we're in LE mode.
 +       */
-+      if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000))) {
++      f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
++      if (f) {
 +#ifdef __ARMEB__
-+              for (i = 0; i < 6; i++) {
++              for (i = 0; i < 6; i++)
 +                      nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
-+              }
 +#else
 +              nas100d_plat_eth[0].hwaddr[0] = readb(f + 0xFC0FD8 + 3);
 +              nas100d_plat_eth[0].hwaddr[1] = readb(f + 0xFC0FD8 + 2);
@@ -77,11 +96,10 @@
 +#endif
 +              iounmap(f);
 +      }
-+      printk(KERN_INFO "NAS100D: Using MAC address 
%.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+             nas100d_plat_eth[0].hwaddr[0], nas100d_plat_eth[0].hwaddr[1],
-+             nas100d_plat_eth[0].hwaddr[2], nas100d_plat_eth[0].hwaddr[3],
-+             nas100d_plat_eth[0].hwaddr[4], nas100d_plat_eth[0].hwaddr[5]);
++      printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n",
++             print_mac(mac_buf, nas100d_plat_eth[0].hwaddr));
 +
  }
  
  MACHINE_START(NAS100D, "Iomega NAS 100d")
+

Modified: 
dists/trunk/linux-2.6/debian/patches/features/arm/nslu2-net-driver-support.patch
==============================================================================
--- 
dists/trunk/linux-2.6/debian/patches/features/arm/nslu2-net-driver-support.patch
    (original)
+++ 
dists/trunk/linux-2.6/debian/patches/features/arm/nslu2-net-driver-support.patch
    Wed Jan 30 04:18:17 2008
@@ -1,8 +1,27 @@
+Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig.
+
+Sets up the corresponding platform data for the nslu2 and nas100d
+boards, and reads the ethernet MAC address from the internal flash.
+
+Tested on both little-endian and big-endian kernels.
+
+Signed-off-by: Rod Whitby
+Signed-off-by: Michael Westerhof
+Tested-by: Tom King <[EMAIL PROTECTED]>
+
 diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c 
b/arch/arm/mach-ixp4xx/nslu2-setup.c
-index 77277d2..f5e9cf7 100644
+index 77277d2..332a066 100644
 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c
 +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -24,6 +24,7 @@
+@@ -14,6 +14,7 @@
+  * Changed to conform to new style __init ixdp425 kas11 10/22/04
+  */
+ 
++#include <linux/if_ether.h>
+ #include <linux/kernel.h>
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+@@ -24,6 +25,7 @@
  #include <asm/mach/arch.h>
  #include <asm/mach/flash.h>
  #include <asm/mach/time.h>
@@ -10,7 +29,7 @@
  
  static struct flash_platform_data nslu2_flash_data = {
        .map_name               = "cfi_probe",
-@@ -140,6 +141,23 @@ static struct platform_device nslu2_uart = {
+@@ -140,6 +142,23 @@ static struct platform_device nslu2_uart = {
        .resource               = nslu2_uart_resources,
  };
  
@@ -34,7 +53,7 @@
  static struct platform_device *nslu2_devices[] __initdata = {
        &nslu2_i2c_gpio,
        &nslu2_flash,
-@@ -147,6 +165,7 @@ static struct platform_device *nslu2_devices[] __initdata 
= {
+@@ -147,6 +166,7 @@ static struct platform_device *nslu2_devices[] __initdata 
= {
  #ifdef CONFIG_LEDS_IXP4XX
        &nslu2_leds,
  #endif
@@ -42,17 +61,18 @@
  };
  
  static void nslu2_power_off(void)
-@@ -175,6 +194,9 @@ static struct sys_timer nslu2_timer = {
+@@ -175,6 +195,10 @@ static struct sys_timer nslu2_timer = {
  
  static void __init nslu2_init(void)
  {
++      DECLARE_MAC_BUF(mac_buf);
 +      uint8_t __iomem *f;
 +      int i;
 +
        ixp4xx_sys_init();
  
        nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -191,6 +213,33 @@ static void __init nslu2_init(void)
+@@ -191,6 +215,31 @@ static void __init nslu2_init(void)
        (void)platform_device_register(&nslu2_uart);
  
        platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
@@ -63,11 +83,11 @@
 +       * Since it is stored in BE in the flash itself, we need to
 +       * byteswap it if we're in LE mode.
 +       */
-+      if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000))) {
++      f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
++      if (f) {
 +#ifdef __ARMEB__
-+              for (i = 0; i < 6; i++) {
++              for (i = 0; i < 6; i++)
 +                      nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
-+              }
 +#else
 +              nslu2_plat_eth[0].hwaddr[0] = readb(f + 0x3FFB0 + 3);
 +              nslu2_plat_eth[0].hwaddr[1] = readb(f + 0x3FFB0 + 2);
@@ -78,11 +98,10 @@
 +#endif
 +              iounmap(f);
 +      }
-+      printk(KERN_INFO "NSLU2: Using MAC address 
%.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+             nslu2_plat_eth[0].hwaddr[0], nslu2_plat_eth[0].hwaddr[1],
-+             nslu2_plat_eth[0].hwaddr[2], nslu2_plat_eth[0].hwaddr[3],
-+             nslu2_plat_eth[0].hwaddr[4], nslu2_plat_eth[0].hwaddr[5]);
++      printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n",
++             print_mac(mac_buf, nslu2_plat_eth[0].hwaddr));
 +
  }
  
  MACHINE_START(NSLU2, "Linksys NSLU2")
+

Modified: dists/trunk/linux-2.6/debian/patches/series/1~experimental.1
==============================================================================
--- dists/trunk/linux-2.6/debian/patches/series/1~experimental.1        
(original)
+++ dists/trunk/linux-2.6/debian/patches/series/1~experimental.1        Wed Jan 
30 04:18:17 2008
@@ -18,10 +18,10 @@
 + bugfix/mips/tulip_mwi_fix.patch
 + features/arm/ixp4xx-feature-bits.patch
 + features/arm/ixp4xx-npe-and-qmgr.patch
-#+ features/arm/ixp4xx-net-headers.patch
++ features/arm/ixp4xx-net-headers.patch
 + features/arm/ixp4xx-net-drivers.patch
-#+ features/arm/nas100d-net-driver-support.patch
-#+ features/arm/nslu2-net-driver-support.patch
++ features/arm/nas100d-net-driver-support.patch
++ features/arm/nslu2-net-driver-support.patch
 + bugfix/sparc/drivers_net-broken.patch
 + bugfix/ia64/hardcode-arch-script-output.patch
 + bugfix/mips/disable-advansys.patch

_______________________________________________
Kernel-svn-changes mailing list
Kernel-svn-changes@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/kernel-svn-changes

Reply via email to