Here is the output from a run of my program it includes the error i also wanted to mention that the program ( firmaware) actually gets detected by my machine and runs with the normal windows driver fine. but when i try to use it to get a report i can't. If it is the firmware anywhere i can get a working example or someone i can talk to ?
NOTICE: hid_init(): libhid 0.2.15+20060325.0.0 is being initialized. NOTICE: hid_init(): successfully initialised HID library. NOTICE: hid_find_usb_device(): vendor 0x0000 of USB device 004/001[0] does not match 0x04d8. NOTICE: hid_find_usb_device(): vendor 0x0000 of USB device 003/001[0] does not match 0x04d8. NOTICE: hid_find_usb_device(): vendor 0x0000 of USB device 001/001[0] does not match 0x04d8. NOTICE: hid_find_usb_device(): found a matching USB device 002/002[0]. NOTICE: hid_force_open(): successfully claimed USB device 002/002[0]. NOTICE: hid_init_parser(): successfully initialised the HID parser for USB Device 002/002[0]. NOTICE: hid_prepare_hid_descriptor(): successfully initialised HID descriptor for USB device 002/002[0] (50 bytes). NOTICE: hid_prepare_report_descriptor(): successfully initialised report descriptor for USB device 002/002[0]. NOTICE: hid_prepare_parser(): successfully set up the HID parser for USB device 002/002[0]. NOTICE: hid_force_open(): successfully opened USB device 002/002[0]. device identification of HIDInterface 002/002[0]: dev_handle: 0x0804b188 device: 0x080541f8 location: 002/002 manufacturer: Microchip Technology Inc. product: Mouse To a Circle Demo parse tree of HIDInterface 002/002[0]: path: 0x00010002.0x00010001.0x00000000; type: 0x80 path: 0x00010002.0x00010001.0x00000000; type: 0x80 path: 0x00010002.0x00010001.0x00000000; type: 0x80 path: 0x00010002.0x00010001.0x00000000; type: 0x80 path: 0x00010002.0x00010001.0x00010030; type: 0x80 path: 0x00010002.0x00010001.0x00010031; type: 0x80 NOTICE: hid_find_object(): found requested item. WARNING: hid_get_input_report(): failed to retrieve report from USB device 002/002[0]:error sending control message: Broken pipe. hid_get_input_report failed with return code 20 Movement in x: 0 Movement in y: 0 NOTICE: hid_close(): successfully closed USB device 002/002[0]. NOTICE: hid_cleanup(): successfully deinitialised HID library. Charles Lepple <[EMAIL PROTECTED]> wrote: On Mar 27, 2008, at 10:13 PM, alfredo alvarez wrote: > So i'm again getting the broken pipe message this time is actually > the device for my project. Can you send the exact error message? Note that depending on what error code you are seeing, it may be a problem with the firmware (e.g. it does not support the transfer in hid_get_input_report().) -- Charles Lepple --------------------------------- Special deal for Yahoo! users & friends - No Cost. Get a month of Blockbuster Total Access now _______________________________________________ libhid-discuss mailing list libhid-discuss@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/libhid-discuss