From: Stephen Barber <smbar...@chromium.org>
The EC can function as a simple RT, this patch adds the RTC related
definitions needed by the rtc-cros-ec driver.
Signed-off-by: Stephen Barber <smbar...@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com>
Acked-by: Lee Jones <lee.jo...@linaro.org>
Acked-by: Benson Leung <ble...@chromium.org>
---
include/linux/mfd/cros_ec_commands.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/linux/mfd/cros_ec_commands.h
b/include/linux/mfd/cros_ec_commands.h
index 2b16e95..c6046a2 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -291,6 +291,9 @@ enum host_event_code {
/* EC desires to change state of host-controlled USB mux */
EC_HOST_EVENT_USB_MUX = 28,
+ /* EC RTC event occurred */
+ EC_HOST_EVENT_RTC = 26,
+
/*
* The high bit of the event mask is not used as a host event code. If
* it reads back as set, then the entire event mask should be
@@ -799,6 +802,8 @@ enum ec_feature_code {
EC_FEATURE_USB_MUX = 23,
/* Motion Sensor code has an internal software FIFO */
EC_FEATURE_MOTION_SENSE_FIFO = 24,
+ /* EC has RTC feature that can be controlled by host commands */
+ EC_FEATURE_RTC = 27,
};
#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
@@ -1709,6 +1714,9 @@ struct ec_response_rtc {
#define EC_CMD_RTC_SET_VALUE 0x46
#define EC_CMD_RTC_SET_ALARM 0x47
+/* Pass as param to SET_ALARM to clear the current alarm */
+#define EC_RTC_ALARM_CLEAR 0
+
/*****************************************************************************/
/* Port80 log access */
--
2.9.3
