[PATCH v3 02/14] mmc: mmci: Don't pretend all variants to have MCI_STARBITERR flag

[patrice.chotard]

From: Patrice Chotard <patrice.chot...@st.com>

This patch prepares for supporting the STM32 variant that
has no such bit in the status register.

Signed-off-by: Andrea Merello <andrea.mere...@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chot...@st.com>
---

v3: _ none

v2: _ replace start_err bool type by u32


 drivers/mmc/host/mmci.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 3125dc0..8a4fbc2 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -83,6 +83,8 @@
  * @qcom_dml: enables qcom specific dma glue for dma transfers.
  * @reversed_irq_handling: handle data irq before cmd irq.
  * @mmcimask1: true if variant have a MMCIMASK1 register.
+ * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
+ *            register.
  */
 struct variant_data {
        unsigned int            clkreg;
@@ -113,6 +115,7 @@ struct variant_data {
        bool                    qcom_dml;
        bool                    reversed_irq_handling;
        bool                    mmcimask1;
+       u32                     start_err;
 };
 
 static struct variant_data variant_arm = {
@@ -123,6 +126,7 @@ struct variant_data {
        .f_max                  = 100000000,
        .reversed_irq_handling  = true,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 static struct variant_data variant_arm_extended_fifo = {
@@ -132,6 +136,7 @@ struct variant_data {
        .pwrreg_powerup         = MCI_PWR_UP,
        .f_max                  = 100000000,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 static struct variant_data variant_arm_extended_fifo_hwfc = {
@@ -142,6 +147,7 @@ struct variant_data {
        .pwrreg_powerup         = MCI_PWR_UP,
        .f_max                  = 100000000,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 static struct variant_data variant_u300 = {
@@ -158,6 +164,7 @@ struct variant_data {
        .pwrreg_clkgate         = true,
        .pwrreg_nopower         = true,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 static struct variant_data variant_nomadik = {
@@ -175,6 +182,7 @@ struct variant_data {
        .pwrreg_clkgate         = true,
        .pwrreg_nopower         = true,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 static struct variant_data variant_ux500 = {
@@ -198,6 +206,7 @@ struct variant_data {
        .busy_detect_mask       = MCI_ST_BUSYENDMASK,
        .pwrreg_nopower         = true,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 static struct variant_data variant_ux500v2 = {
@@ -223,6 +232,7 @@ struct variant_data {
        .busy_detect_mask       = MCI_ST_BUSYENDMASK,
        .pwrreg_nopower         = true,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 static struct variant_data variant_qcom = {
@@ -242,6 +252,7 @@ struct variant_data {
        .qcom_fifo              = true,
        .qcom_dml               = true,
        .mmcimask1              = true,
+       .start_err              = MCI_STARTBITERR,
 };
 
 /* Busy detection for the ST Micro variant */
@@ -935,8 +946,9 @@ static void mmci_start_data(struct mmci_host *host, struct 
mmc_data *data)
                return;
 
        /* First check for errors */
-       if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
-                     MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+       if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT |
+                     host->variant->start_err |
+                     MCI_TXUNDERRUN | MCI_RXOVERRUN)) {
                u32 remain, success;
 
                /* Terminate the DMA transfer */
-- 
1.9.1