On 2018-05-16 16:22, Bjorn Helgaas wrote:
On Wed, May 16, 2018 at 01:46:25PM +0530, p...@codeaurora.org wrote:
On 2018-05-16 05:26, Bjorn Helgaas wrote:
> On Fri, May 11, 2018 at 05:22:08PM +0530, p...@codeaurora.org wrote:
> > On 2018-05-11 16:13, Oza Pawandeep wrote:
> > > DPC driver implements link_reset callback, and calls
> > > pci_do_fatal_recovery().
> > >
> > > Which follows standard path of ERR_FATAL recovery.
> > >
> > > Signed-off-by: Oza Pawandeep <p...@codeaurora.org>
> > >
> > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> > > index 5e8857a..6af7595 100644
> > > --- a/drivers/pci/pci.h
> > > +++ b/drivers/pci/pci.h
> > > @@ -354,7 +354,7 @@ static inline resource_size_t
> > > pci_resource_alignment(struct pci_dev *dev,
> > >  void pci_enable_acs(struct pci_dev *dev);
> > >
> > >  /* PCI error reporting and recovery */
> > > -void pcie_do_fatal_recovery(struct pci_dev *dev);
> > > +void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service);
> > >  void pcie_do_nonfatal_recovery(struct pci_dev *dev);
> > >
> > >  bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
> > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c
> > > b/drivers/pci/pcie/aer/aerdrv_core.c
> > > index fdfc474..36e622d 100644
> > > --- a/drivers/pci/pcie/aer/aerdrv_core.c
> > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c
> > > @@ -254,7 +254,7 @@ static void handle_error_source(struct pcie_device
> > > *aerdev,
> > >          } else if (info->severity == AER_NONFATAL)
> > >                  pcie_do_nonfatal_recovery(dev);
> > >          else if (info->severity == AER_FATAL)
> > > -                pcie_do_fatal_recovery(dev);
> > > +                pcie_do_fatal_recovery(dev, PCIE_PORT_SERVICE_AER);
> > >  }
> > >
> > >  #ifdef CONFIG_ACPI_APEI_PCIEAER
> > > @@ -321,7 +321,7 @@ static void aer_recover_work_func(struct work_struct
> > > *work)
> > >                  if (entry.severity == AER_NONFATAL)
> > >                          pcie_do_nonfatal_recovery(pdev);
> > >                  else if (entry.severity == AER_FATAL)
> > > -                        pcie_do_fatal_recovery(pdev);
> > > +                        pcie_do_fatal_recovery(pdev, 
PCIE_PORT_SERVICE_AER);
> > >                  pci_dev_put(pdev);
> > >          }
> > >  }
> > > diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
> > > index 80ec384..5680c13 100644
> > > --- a/drivers/pci/pcie/dpc.c
> > > +++ b/drivers/pci/pcie/dpc.c
> > > @@ -73,29 +73,31 @@ static void dpc_wait_link_inactive(struct dpc_dev
> > > *dpc)
> > >          pcie_wait_for_link(pdev, false);
> > >  }
> > >
> > > -static void dpc_work(struct work_struct *work)
> > > +static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
> > >  {
> > > -        struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
> > > -        struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
> > > -        struct pci_bus *parent = pdev->subordinate;
> > > -        u16 cap = dpc->cap_pos, ctl;
> > > -
> > > -        pci_lock_rescan_remove();
> > > -        list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
> > > -                                         bus_list) {
> > > -                pci_dev_get(dev);
> > > -                pci_dev_set_disconnected(dev, NULL);
> > > -                if (pci_has_subordinate(dev))
> > > -                        pci_walk_bus(dev->subordinate,
> > > -                                     pci_dev_set_disconnected, NULL);
> > > -                pci_stop_and_remove_bus_device(dev);
> > > -                pci_dev_put(dev);
> > > -        }
> > > -        pci_unlock_rescan_remove();
> > > -
> > > +        struct dpc_dev *dpc;
> > > +        struct pcie_device *pciedev;
> > > +        struct device *devdpc;
> > > +        u16 cap, ctl;
> > > +
> > > +        /*
> > > +         * DPC disables the Link automatically in hardware, so it has
> > > +         * already been reset by the time we get here.
> > > +         */
> > > +
> > > +        devdpc = pcie_port_find_device(pdev, PCIE_PORT_SERVICE_DPC);
> > > +        pciedev = to_pcie_device(devdpc);
> > > +        dpc = get_service_data(pciedev);
> > > +        cap = dpc->cap_pos;
> > > +
> > > +        /*
> > > +         * Waiting until the link is inactive, then clearing DPC
> > > +         * trigger status to allow the port to leave DPC.
> > > +         */
> > >          dpc_wait_link_inactive(dpc);
> > > +
> > >          if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
> > > -                return;
> > > +                return PCI_ERS_RESULT_DISCONNECT;
> > >          if (dpc->rp_extensions && dpc->rp_pio_status) {
> > >                  pci_write_config_dword(pdev, cap + 
PCI_EXP_DPC_RP_PIO_STATUS,
> > >                                         dpc->rp_pio_status);
> > > @@ -108,6 +110,17 @@ static void dpc_work(struct work_struct *work)
> > >          pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
> > >          pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
> > >                                ctl | PCI_EXP_DPC_CTL_INT_EN);
> > > +
> > > +        return PCI_ERS_RESULT_RECOVERED;
> > > +}
> > > +
> > > +static void dpc_work(struct work_struct *work)
> > > +{
> > > +        struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
> > > +        struct pci_dev *pdev = dpc->dev->port;
> > > +
> > > +        /* From DPC point of view error is always FATAL. */
> > > +        pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
> > >  }
> > >
> > >  static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
> > > @@ -288,6 +301,7 @@ static struct pcie_port_service_driver dpcdriver = {
> > >          .service        = PCIE_PORT_SERVICE_DPC,
> > >          .probe          = dpc_probe,
> > >          .remove         = dpc_remove,
> > > +        .reset_link     = dpc_reset_link,
> > >  };
> > >
> > >  static int __init dpc_service_init(void)
> > > diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> > > index 33a16b1..29ff148 100644
> > > --- a/drivers/pci/pcie/err.c
> > > +++ b/drivers/pci/pcie/err.c
> > > @@ -185,7 +185,7 @@ static pci_ers_result_t default_reset_link(struct
> > > pci_dev *dev)
> > >          return PCI_ERS_RESULT_RECOVERED;
> > >  }
> > >
> > > -static pci_ers_result_t reset_link(struct pci_dev *dev)
> > > +static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
> > >  {
> > >          struct pci_dev *udev;
> > >          pci_ers_result_t status;
> > > @@ -200,7 +200,7 @@ static pci_ers_result_t reset_link(struct pci_dev
> > > *dev)
> > >          }
> > >
> > >          /* Use the aer driver of the component firstly */
> > > -        driver = pcie_port_find_service(udev, PCIE_PORT_SERVICE_AER);
> > > +        driver = pcie_port_find_service(udev, service);
> > >
> > >          if (driver && driver->reset_link) {
> > >                  status = driver->reset_link(udev);
> > > @@ -287,7 +287,7 @@ static pci_ers_result_t
> > > broadcast_error_message(struct pci_dev *dev,
> > >   * followed by re-enumeration of devices.
> > >   */
> > >
> > > -void pcie_do_fatal_recovery(struct pci_dev *dev)
> > > +void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service)
> > >  {
> > >          struct pci_dev *udev;
> > >          struct pci_bus *parent;
> > > @@ -313,7 +313,7 @@ void pcie_do_fatal_recovery(struct pci_dev *dev)
> > >                  pci_dev_put(pdev);
> > >          }
> > >
> > > -        result = reset_link(udev);
> > > +        result = reset_link(udev, service);
> > >
> > >          if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> > >                  /*
> > > diff --git a/include/linux/aer.h b/include/linux/aer.h
> > > index 8f87bbe..0c506fe 100644
> > > --- a/include/linux/aer.h
> > > +++ b/include/linux/aer.h
> > > @@ -14,6 +14,7 @@
> > >  #define AER_NONFATAL                    0
> > >  #define AER_FATAL                       1
> > >  #define AER_CORRECTABLE                 2
> > > +#define DPC_FATAL                       4
>
> I think DPC_FATAL can be 3, since these values are not used as a bit
> mask.
>
> > >  struct pci_dev;
> >
> >
> > Hi Bjorn,
> >
> >
> > I have addressed all the comments, and I hope we are heading towards
> > closure.
> >
> > I just figure that pcie_do_fatal_recovery  (which is getting
> > executed for
> > DPC as well)
> >
> > if (result == PCI_ERS_RESULT_RECOVERED) {
> >                 if (pcie_wait_for_link(udev, true))
> >                         pci_rescan_bus(udev->bus);
> >                 pci_info(dev, "Device recovery successful\n");
> >         }
> >
> > I have to correct it to
> >
> > if (service==AER  && result == PCI_ERS_RESULT_RECOVERED) {
> >                 if (pcie_wait_for_link(udev, true))
> >                         pci_rescan_bus(udev->bus);
> >                 pci_info(dev, "Device recovery successful\n");
> >         }
>
> This patch is mostly a restructuring of DPC and doesn't really change
> its
> behavior.  DPC didn't previously call pcie_wait_for_link() or
> pci_rescan_bus(), so I agree that adding the "service==AER" test will
> help preserve the existing DPC behavior.
>
> However, the rescan should happen with DPC *somewhere* and we should
> clarify where that is.  Maybe for now we only need a comment about where
> that happens.  Ideally, we could eventually converge this so the same
> mechanism is used for AER and DPC, so we wouldn't need a test like
> "service=AER".

Please still add a comment here about why the rescan behavior is
different.

I am sorry I pasted the wrong snippet.
following needs to be fixed in v17.
from:
   if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
                /*
* If the error is reported by a bridge, we think this error * is related to the downstream link of the bridge, so we
                 * do error recovery on all subordinates of the bridge
instead
* of the bridge and clear the error status of the bridge.
                 */
pci_walk_bus(dev->subordinate, report_resume, &result_data);
                pci_cleanup_aer_uncorrect_error_status(dev);
        }


to

   if (service==AER  && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
                /*
* If the error is reported by a bridge, we think this error * is related to the downstream link of the bridge, so we
                 * do error recovery on all subordinates of the bridge
instead
* of the bridge and clear the error status of the bridge.
                 */
pci_walk_bus(dev->subordinate, report_resume, &result_data);
                pci_cleanup_aer_uncorrect_error_status(dev);
        }

this is only needed in case of AER.

Oh, I missed this before.  It makes sense to clear the AER status
here, but why do we need to call report_resume()?  We just called all
the driver .remove() methods and detached the drivers from the
devices.  So I don't think report_resume() will do anything
("dev->driver" should be NULL) except set the dev->error_state to
pci_channel_io_normal.  We probably don't need that because we didn't
change error_state in this fatal error path.


if you remember, the path ends up calling
aer_error_resume

the existing code ends up calling aer_error_resume as follows.

do_recovery(pci_dev)
    broadcast_error_message(..., error_detected, ...)
    if (AER_FATAL)
      reset_link(pci_dev)
        udev = BRIDGE ? pci_dev : pci_dev->bus->self
        driver->reset_link(udev)
          aer_root_reset(udev)
    if (CAN_RECOVER)
      broadcast_error_message(..., mmio_enabled, ...)
    if (NEED_RESET)
      broadcast_error_message(..., slot_reset, ...)
    broadcast_error_message(dev, ..., report_resume, ...)
      if (BRIDGE)
        report_resume
          driver->resume
            pcie_portdrv_err_resume
              device_for_each_child(..., resume_iter)
                resume_iter
                  driver->error_resume
                    aer_error_resume
pci_cleanup_aer_uncorrect_error_status(pci_dev) # only if BRIDGE
          pci_write_config_dword(PCI_ERR_UNCOR_STATUS)

hence I think we have to call it in order to clear the root port PCI_ERR_UNCOR_STATUS and PCI_EXP_DEVSTA.
makes sense ?

Regards,
Oza.


by the way I can not find pci/oza-v16 branch when I cloned
 git clone
https://kernel.googlesource.com/pub/scm/linux/kernel/git/helgaas/pci

Sorry, I must have forgotten to push it.  It's there now at


https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/oza-v16

I don't know anything about the googlesource mirror, so I don't know
when it will get there.

Reply via email to