On Thu, May 07, 2020 at 10:47:32PM +0100, Bryan O'Donoghue wrote:
> Add device tree binding documentation for the Texas Instruments tps6598x
> Type-C chip driver.
>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Heikki Krogerus <heikki.kroge...@linux.intel.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Cc: linux-...@vger.kernel.org
> Cc: devicet...@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Bryan O'Donoghue <bryan.odonog...@linaro.org>
> ---
> .../devicetree/bindings/usb/ti,tps6598x.yaml | 64 +++++++++++++++++++
> 1 file changed, 64 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
> b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
> new file mode 100644
> index 000000000000..8eaf4b6c4735
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/ti,tps6598x.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Texas Instruments 6598x Type-C Port Switch and Power Delivery
> controller DT bindings
> +
> +maintainers:
> + - Bryan O'Donoghue <bryan.odonog...@linaro.org>
> +
> +description: |
> + Texas Instruments 6598x Type-C Port Switch and Power Delivery controller
> +
> +properties:
> + compatible:
> + enum:
> + - ti,tps6598x
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + items:
> + - const: irq
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tps6598x: tps6598x@38 {
> + compatible = "ti,tps6598x";
> + reg = <0x38>;
> +
> + interrupt-parent = <&msmgpio>;
> + interrupts = <107 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "irq";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&typec_pins>;
> +
> + typec_con: connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
> + port {
The connector binding has specific numbering of the ports defined for
HS, SS, alt mode.
So you should have 'ports' here.
> + typec_ep: endpoint {
> + remote-endpoint = <&otg_ep>;
> + };
> + };
> + };
> + };
> + };
> +...
> --
> 2.25.1
>
