On 6/24/2020 5:21 AM, Vinod Koul wrote:
> Hi Wesley,
>
> On 21-05-20, 18:50, Wesley Cheng wrote:
>> Allow for the PHY to be put into a powered down state when possible.
>> Add the required suspend and resume callbacks, which will determine
>> what resources can be turned off depending on the cable status.
>>
>> Signed-off-by: Wesley Cheng <wch...@codeaurora.org>
>>
>> ---
>> Changes in v2:
>> - Addressed checkpatch alignment/line length warnings.
>> - Removed superfluous init in qcom_snps_hsphy_resume().
>>
>> drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 100
>> ++++++++++++++++++++++++++
>> 1 file changed, 100 insertions(+)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
>> b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
>> index 4d74045..0a4e77af 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
>> @@ -76,7 +76,9 @@
>> * @iface_clk: phy interface clock
>> * @phy_reset: phy reset control
>> * @vregs: regulator supplies bulk data
>> + * @suspended: PHY is in the suspended state
>> * @phy_initialized: if PHY has been initialized correctly
>> + * @mode: contains the current mode the PHY is in
>> */
>> struct qcom_snps_hsphy {
>> struct phy *phy;
>> @@ -87,7 +89,9 @@ struct qcom_snps_hsphy {
>> struct reset_control *phy_reset;
>> struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
>>
>> + bool suspended;
>> bool phy_initialized;
>> + enum phy_mode mode;
>> };
>>
>> static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32
>> offset,
>> @@ -104,6 +108,84 @@ static inline void qcom_snps_hsphy_write_mask(void
>> __iomem *base, u32 offset,
>> readl_relaxed(base + offset);
>> }
>>
>> +static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
>> +{
>> + if (hsphy->suspended)
>> + return 0;
>
> Am still not convinced why this would be called when we are already
> suspended :)
>
Hi Vinod,
OK, we can remove it for now, and if its really required further on, we
can re-add.
>> +
>> + dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY, mode:%d\n",
>> + hsphy->mode);
>
> Remove debug artifacts here?
>
Sure, can do that.
>> +
>> + if (hsphy->mode == PHY_MODE_USB_HOST) {
>> + /* Enable auto-resume to meet remote wakeup timing */
>> + qcom_snps_hsphy_write_mask(hsphy->base,
>> + USB2_PHY_USB_PHY_HS_PHY_CTRL2,
>> + USB2_AUTO_RESUME,
>> + USB2_AUTO_RESUME);
>
> Lets align the lines above to opening brace please..
> If you run checkpatch with --strict option you would get this CHECK:
> Alignment should match open parenthesis
>
OK, got it. Fixed a few other spacing warnings as well.
>> + usleep_range(500, 1000);
>> + qcom_snps_hsphy_write_mask(hsphy->base,
>> + USB2_PHY_USB_PHY_HS_PHY_CTRL2,
>> + 0, USB2_AUTO_RESUME);
>> + }
>> +
>> + clk_disable_unprepare(hsphy->cfg_ahb_clk);
>> + hsphy->suspended = true;
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
>> +{
>> + int ret;
>> +
>> + if (!hsphy->suspended)
>> + return 0;
>> +
>> + dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode:%d\n",
>> + hsphy->mode);
>
> here as well
>
Done.
>> +
>> + ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
>> + if (ret) {
>> + dev_err(&hsphy->phy->dev,
>> + "failed to enable cfg ahb clock, %d\n", ret);
>
> single line should be okay now :)
>
Yep!
>> + return ret;
>> + }
>> +
>> + hsphy->suspended = false;
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device
>> *dev)
>> +{
>> + struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
>> +
>> + if (!hsphy->phy_initialized)
>> + return 0;
>> +
>> + qcom_snps_hsphy_suspend(hsphy);
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
>> +{
>> + struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
>> +
>> + if (!hsphy->phy_initialized)
>> + return 0;
>> +
>> + qcom_snps_hsphy_resume(hsphy);
>> + return 0;
>> +}
>> +
>> +static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
>> + int submode)
>> +{
>> + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
>> +
>> + hsphy->mode = mode;
>> + return 0;
>> +}
>> +
>> static int qcom_snps_hsphy_init(struct phy *phy)
>> {
>> struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
>> @@ -175,6 +257,7 @@ static int qcom_snps_hsphy_init(struct phy *phy)
>> UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
>>
>> hsphy->phy_initialized = true;
>> + hsphy->suspended = false;
>>
>> return 0;
>>
>> @@ -201,6 +284,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
>> static const struct phy_ops qcom_snps_hsphy_gen_ops = {
>> .init = qcom_snps_hsphy_init,
>> .exit = qcom_snps_hsphy_exit,
>> + .set_mode = qcom_snps_hsphy_set_mode,
>
> This should be a separate patch, whats set_mode got to do with suspend
> support :)
>
Got it, will split this into another patch
>> .owner = THIS_MODULE,
>> };
>>
>> @@ -212,6 +296,11 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
>> };
>> MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
>>
>> +static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
>> + SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
>> + qcom_snps_hsphy_runtime_resume, NULL)
>> +};
>> +
>> static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> @@ -255,6 +344,14 @@ static int qcom_snps_hsphy_probe(struct platform_device
>> *pdev)
>> return ret;
>> }
>>
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> + /*
>> + * Prevent runtime pm from being ON by default. Users can enable
>> + * it using power/control in sysfs.
>> + */
>> + pm_runtime_forbid(dev);
>> +
>> generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
>> if (IS_ERR(generic_phy)) {
>> ret = PTR_ERR(generic_phy);
>> @@ -269,6 +366,8 @@ static int qcom_snps_hsphy_probe(struct platform_device
>> *pdev)
>> phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> if (!IS_ERR(phy_provider))
>> dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
>> + else
>> + pm_runtime_disable(dev);
>>
>> return PTR_ERR_OR_ZERO(phy_provider);
>> }
>> @@ -277,6 +376,7 @@ static int qcom_snps_hsphy_probe(struct platform_device
>> *pdev)
>> .probe = qcom_snps_hsphy_probe,
>> .driver = {
>> .name = "qcom-snps-hs-femto-v2-phy",
>> + .pm = &qcom_snps_hsphy_pm_ops,
>> .of_match_table = qcom_snps_hsphy_of_match_table,
>> },
>> };
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
