On Fri, Jan 1, 2021, at 10:20 PM, Barnabás Pőcze wrote:
> Hi
>
>
> 2021. január 1., péntek 7:11 keltezéssel, Jiaxun Yang írta:
>
> > Newer ideapads (e.g.: Yoga 14s, 720S 14) comes with I2C HID
> > Touchpad and do not use EC to switch touchpad. Reading VPCCMD_R_TOUCHPAD
> > will return zero thus touchpad may be blocked. Writing VPCCMD_W_TOUCHPAD
> > may cause a spurious key press.
> >
> > Add has_touchpad_switch to workaround these machines.
> >
> > Signed-off-by: Jiaxun Yang <jiaxun.y...@flygoat.com>
> > Cc: sta...@vger.kernel.org # 5.4+
>
> Interestingly, the Lenovo Yoga 540-14IKB 80X8 has an HID-over-I2C touchpad,
> and yet it can be controlled by reading/writing the appropriate EC registers.
>
>
> > ---
> > drivers/platform/x86/ideapad-laptop.c | 18 +++++++++++++++++-
> > 1 file changed, 17 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/platform/x86/ideapad-laptop.c
> > b/drivers/platform/x86/ideapad-laptop.c
> > index 7598cd46cf60..b6a4db37d0fc 100644
> > --- a/drivers/platform/x86/ideapad-laptop.c
> > +++ b/drivers/platform/x86/ideapad-laptop.c
> > @@ -92,6 +92,7 @@ struct ideapad_private {
> > struct dentry *debug;
> > unsigned long cfg;
> > bool has_hw_rfkill_switch;
> > + bool has_touchpad_switch;
> > const char *fnesc_guid;
> > };
> >
> > @@ -535,7 +536,9 @@ static umode_t ideapad_is_visible(struct kobject *kobj,
> > } else if (attr == &dev_attr_fn_lock.attr) {
> > supported = acpi_has_method(priv->adev->handle, "HALS") &&
> > acpi_has_method(priv->adev->handle, "SALS");
> > - } else
> > + } else if (attr == &dev_attr_touchpad.attr)
> > + supported = priv->has_touchpad_switch;
> > + else
> > supported = true;
> >
> > return supported ? attr->mode : 0;
> > @@ -867,6 +870,9 @@ static void ideapad_sync_touchpad_state(struct
> > ideapad_private *priv)
> > {
> > unsigned long value;
> >
> > + if (!priv->has_touchpad_switch)
> > + return;
> > +
> > /* Without reading from EC touchpad LED doesn't switch state */
> > if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) {
> > /* Some IdeaPads don't really turn off touchpad - they only
> > @@ -989,6 +995,12 @@ static int ideapad_acpi_add(struct platform_device
> > *pdev)
> > priv->platform_device = pdev;
> > priv->has_hw_rfkill_switch = dmi_check_system(hw_rfkill_list);
> >
> > + /* Most ideapads with I2C HID don't use EC touchpad switch */
> > + if (acpi_dev_present("PNP0C50", NULL, -1))
> > + priv->has_touchpad_switch = false;
> > + else
> > + priv->has_touchpad_switch = true;
> > +
>
> `priv->has_touchpad_switch = !acpi_dev_present(...)`
> ?
Will fix.
>
>
> > ret = ideapad_sysfs_init(priv);
> > if (ret)
> > return ret;
> > @@ -1006,6 +1018,10 @@ static int ideapad_acpi_add(struct platform_device
> > *pdev)
> > if (!priv->has_hw_rfkill_switch)
> > write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1);
> >
> > + /* The same for Touchpad */
> > + if (!priv->has_touchpad_switch)
> > + write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, 1);
> > +
>
> Shouldn't it be the other way around: `if (priv->has_touchpad_switch)`?
It is to prevent accidentally disable touchpad on machines that do have EC
switch,
so it's intentional.
Thanks.
- Jiaxun
>
>
>
> > for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
> > if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
> > ideapad_register_rfkill(priv, i);
> > --
> > 2.30.0
>
>
> Regards,
> Barnabás Pőcze
>
--
- Jiaxun
